EN 13472:2012
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation
Withdrawn date
30-04-2013
Published date
17-10-2012
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Test specimens
7 Procedure
8 Calculation and expression of results
9 Accuracy of measurement
10 Test report
Annex A (informative) - Table with examples
of calculation of the length of test
specimens
Bibliography
This European Standard specifies the equipment and procedures for determining the short term water absorption of preformed pipe insulation by partial immersion in water. It is applicable to thermal insulating products.NOTEIt is intended to simulate the water absorption caused by exposure to rain for 24 h during product installation.If the pipe insulation is cut from a flat product, then the short term water absorption by partial immersion can be obtained from tests carried out on the flat product with similar properties in accordance with EN 1609, providing the test is carried out in the direction giving the highest water uptake.
| Committee |
CEN/TC 88
|
| DevelopmentNote |
Supersedes PREN 13472. (11/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 13472:2012 | Identical |
| SN EN 13472 : 2012 | Identical |
| NBN EN 13472 : 2012 | Identical |
| NF EN 13472 : 2012 | Identical |
| NS EN 13472 : 2012 | Identical |
| DIN EN 13472:2013-01 | Identical |
| NEN EN 13472 : 2012 | Identical |
| UNI EN 13472 : 2012 | Identical |
| BS EN 13472:2012 | Identical |
| PN EN 13472 : 2013 | Identical |
| UNE-EN 13472:2015 | Identical |
| ONORM EN 13472 : 2012 | Identical |
| PREN 14313 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| UNE-EN 14306:2017 | Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification |
| DIN EN 14306:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION |
| 08/30184166 DC : DRAFT JUNE 2008 | BS ISO 8143 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - CALCIUM SILICATE PRODUCTS |
| 05/30136556 DC : 0 | PREN 14313 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATION - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| ISO 18098:2013 | Thermal insulating products for building equipment and industrial installations — Determination of the apparent density of preformed pipe insulation |
| DIN EN 14304:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| 15/30315069 DC : DRAFT MAY 2015 | BS EN 14313 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| 15/30315075 DC : DRAFT MAY 2015 | BS EN 14305 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| 15/30315078 DC : DRAFT MAY 2015 | BS EN 14307 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| PREN 15501 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXPANDED PERLITE (EP) AND EXFOLIATED VERMICULITE (EV) PRODUCTS - SPECIFICATION |
| BS ISO 18098:2013 | Thermal insulating products for building equipment and industrial installations. Determination of the apparent density of preformed pipe insulation |
| I.S. EN 14305:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| PREN 14304 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| PREN 14305 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| I.S. EN 14304:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| BS EN 14304 : 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| PREN 14306 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION |
| VDI 2055 Blatt 2:2013-10 | Thermal insulation of heated and refrigerated operational installations in the industry and in the building services - Technical basics for the verification of properties of insulating materials |
| BS EN 14306:2015 | Thermal insulation products for building equipment and industrial installations. Factory made calcium silicate (CS) products. Specification |
| UNE-EN 14305:2017 | Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification |
| 12/30270374 DC : 0 | BS EN 15501 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXPANDED PERLITE (EP) AND EXFOLIATED VERMICULITE (EV) PRODUCTS - SPECIFICATION |
| 15/30315072 DC : DRAFT MAY 2015 | BS EN 14306 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION |
| DIN EN 14307:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| UNE-EN 14313:2017 | Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification |
| DIN EN 14303:2016-08 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| DIN EN 15501:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXPANDED PERLITE (EP) AND EXFOLIATED VERMICULITE (EV) PRODUCTS - SPECIFICATION |
| ISO 8143:2010 | Thermal insulation products for building equipment and industrial installations Calcium silicate products |
| PREN 14307 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| 15/30315090 DC : DRAFT MAY 2015 | BS EN 14304 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| 05/30136552 DC : 0 | PREN 14304 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) - SPECIFICATION |
| PREN 14303 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| ISO 18099:2013 | Thermal insulating products for building equipment and industrial installations — Determination of the coefficient of thermal expansion |
| BS ISO 18099:2013 | Thermal insulating products for building equipment and industrial installations. Determination of the coefficient of thermal expansion |
| 15/30315096 DC : DRAFT MAY 2015 | BS EN 15501 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXPANDED PERLITE (EP) AND EXFOLIATED VERMICULITE (EV) PRODUCTS - SPECIFICATION |
| DIN EN 14313:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| BS EN 14305:2015 | Thermal insulation products for building equipment and industrial installations. Factory made cellular glass (CG) products. Specification |
| I.S. EN 14306:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION |
| ISO 18097:2013 | Thermal insulating products for building equipment and industrial installations — Determination of maximum service temperature |
| I.S. EN 14313:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| EN 14306:2015 | Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification |
| EN 14305:2015 | Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification |
| EN 14307:2015 | Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification |
| EN 14304:2015 | Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification |
| EN 14303:2015 | Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
| EN 15501:2015 | Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification |
| EN 14313:2015 | Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification |
| I.S. EN 15501:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXPANDED PERLITE (EP) AND EXFOLIATED VERMICULITE (EV) PRODUCTS - SPECIFICATION |
| 05/30136538 DC : 0 | PREN 14307 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| BS ISO 18097:2013 | Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature |
| BS EN 14303 : 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| 15/30315093 DC : DRAFT MAY 2015 | BS EN 14303 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| BS EN 15501:2013 | Thermal insulation products for building equipment and industrial installations. Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products. Specification |
| UNE-EN 15501:2017 | Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification |
| BS EN 14307:2015 | Thermal insulation products for building equipment and industrial installations. Factory made extruded polystyrene foam (XPS) products. Specification |
| DIN EN 14305:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| I.S. EN 14307:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| I.S. EN 14303:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| BS EN 14313 : 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| EN 1609:2013 | Thermal insulating products for building applications - Determination of short term water absorption by partial immersion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.