EN 13157:2004+A1:2009
Current
The latest, up-to-date edition.
Cranes - Safety - Hand powered cranes
12-08-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
6 Verification of the safety requirements and/or measures
7 Information for use
Annex A (normative) - Standards for hooks
Annex ZA (informative) - Relationship of this European
Standard and the essential requirements
of EC Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 2006/42/EC
This European Standard specifies requirements for the following hand powered lifting equipment defined in clause 3:Hand chain blocks;Lever hoists;Jaw winches;Hand powered trolleys supporting lifting machines;Drum winches;Pulley blocks and deflection pulley.The significant hazards covered by this European Standard are identified in clause 4.This European Standard does not cover hazards related to the lifting of persons.This standard does not specify the additional requirements for:-use in ambient temperature outside the range of - 10°C to + 50°C,-hand powered lifting equipment in direct contact with food stuffs or pharmaceuticals requiring a high level of cleanliness for hygiene reasons;-hazards resulting from handling specific hazardous materials (e.g. explosives, hot molten masses, radiating materials);-hazards caused by operation in an explosive atmosphere.This European Standard is applicable to hand powered lifting equipment, which are manufactured after the date of approval by CEN of this standard.
Committee |
CEN/TC 147
|
DevelopmentNote |
2004 Edition Re-Issued in August 2009 & incorporates AMD 1 2009. (09/2009)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
DIN EN 13157:2010-07 | Identical |
NEN EN 13157 : 2004 + A1 2009 | Identical |
NF EN 13157 : 2004 + A1 2009 | Identical |
UNI EN 13157 : 2009 | Identical |
PN EN 13157 : 2008 + A1 2009 | Identical |
I.S. EN 13157:2004 | Identical |
BS EN 13157 : 2004 | Identical |
NBN EN 13157 : 2004 + A1 2009 | Identical |
SN EN 13157 : 2004 + A1 2010 | Identical |
UNE-EN 13157:2005 | Identical |
NS EN 13157 : 2004 + A1 2009 | Identical |
UNE-EN 13157:2005+A1:2010 | Identical |
BS EN 13157:2004+A1:2009 | Identical |
UNE-EN 16851:2017 | Cranes - Light crane systems |
BS EN 13001-1:2015 | Cranes. General design General principles and requirements |
DIN EN 15011:2014-09 | Cranes - Bridge and gantry cranes (includes Amendment A1:2014) |
EN 16851:2017 | Cranes - Light crane systems |
EN 15011:2011+A1:2014 | Cranes - Bridge and gantry cranes |
I.S. EN 13001-1:2015 | CRANES - GENERAL DESIGN - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
15/30296047 DC : 0 | BS EN 16851 - CRANES - LIGHT CRANE SYSTEMS |
07/30161753 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
I.S. EN 16851:2017 | CRANES - LIGHT CRANE SYSTEMS |
DIN EN 13001-1:2015-06 | CRANES - GENERAL DESIGN - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
UNE-EN 13001-1:2015 | Cranes - General design - Part 1: General principles and requirements |
I.S. EN 15011:2011 | CRANES - BRIDGE AND GANTRY CRANES |
17/30357380 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
BS EN 15011 : 2011 | CRANES - BRIDGE AND GANTRY CRANES |
10/30218104 DC : 0 | BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES |
DIN EN 16851 E : 2017 | CRANES - LIGHT CRANE SYSTEMS |
BS EN 16851:2017 | Cranes. Light crane systems |
DIN EN 16851:2015-05 (Draft) | CRANES - LIGHT CRANE SYSTEMS |
DIN EN 16851:2017-06 | Cranes - Light crane systems |
EN 13001-1:2015 | Cranes - General design - Part 1: General principles and requirements |
UNI EN 15011 : 2014 | CRANES - BRIDGE AND GANTRY CRANES |
UNE-EN 15011:2011 | Cranes - Bridge and gantry cranes |
EN 12385-4:2002+A1:2008 | Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications |
EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
EN 13411-2:2001+A1:2008 | Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings |
EN 818-7:2002+A1:2008 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
ISO 606:2015 | Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets |
EN 13411-3:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
EN 13411-7:2006+A1:2008 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
EN 13411-1:2002+A1:2008 | Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
ISO 4309:2010 | Cranes Wire ropes Care and maintenance, inspection and discard |
EN 13411-4:2011 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
EN 13411-6:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.