EN 13001-3-1:2012+A2:2018
Current
The latest, up-to-date edition.
Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
17-01-2018
1 Scope
2 Normative references
3 Terms ,definitions, symbols and abbreviations
4 General
5 Proof of static strength
6 Proof of fatigue strength
7 Proof of static strength of hollow section girder joints
8 Proof of elastic stability
Annex A (informative) - Limit design shear force
F[V,Rd] per bolt and per shear plane for multiple
shear plane connections
Annex B (informative) - Preloaded bolts
Annex C (normative) - Design weld stresses sigma[W,Sd]
and tau[W,Sd]
Annex D (normative) - Values of slope constant m
and characteristic fatigue strength deltasigma[c],
deltatau[c]
Annex E (normative) - Calculated values of limit design
stress ranges deltasigma[Rd] and deltasigma[Rd,1]
Annex F (informative) - Evaluation of stress cycles (example)
Annex G (informative) - Calculation of stiffnesses for
connections loaded in tension
Annex H (informative) - Hollow Sections
Annex I (informative) - Selection of a suitable set of crane
standards for a given application
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Defines general conditions, requirements and methods to prevent mechanical hazards of cranes by design and theoretical verification.
| Committee |
CEN/TC 147
|
| DevelopmentNote |
To be read in conjunction with EN 13001-1 & EN 13001-2. Supersedes CEN/TS 13001-3-1. (07/2012) 2012 Edition Re-Issued in January 2018 & incorporates AMD 2 2018. (01/2018)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| SupersededBy |
| Standards | Relationship |
| BS EN 13001-3-1 : 2012 | Identical |
| NF EN 13001-3-1 : 2012 + A2 2018 | Identical |
| UNI EN 13001-3-1 : 2013 | Identical |
| NS EN 13001-3-1 : 2012 + A2 2018 | Identical |
| PN EN 13001-3-1 : 2012 + A1 2013 | Identical |
| ÖNORM EN 13001-3-1: 2020 01 15 | Identical |
| NBN EN 13001-3-1 : 2012 + A1 2013 | Identical |
| NEN EN 13001-3-1 : 2012 + A2 2018 | Identical |
| SN EN 13001-3-1 : 2012 + A1 2013 | Identical |
| DIN EN 13001-3-1:2013-12 | Identical |
| I.S. EN 13001-3-1:2012 | Identical |
| UNE-EN 13001-3-1:2012+A2:2018 | Identical |
| DIN EN 13001-3-1:2019-03 | Identical |
| ONORM EN 13001-3-1 : DEC 2013 | Identical |
| UNI EN 13001-3-1:2018 | Identical |
| BS EN 13001-3-1:2012+A2:2018 | Identical |
| ISO 2553:2013 | Welding and allied processes Symbolic representation on drawings Welded joints |
| EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
| EN 10025-4:2004 | Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 4306-1:2007 | Cranes — Vocabulary — Part 1: General |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
| ISO 9587:2007 | Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
| EN 10149-2:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels |
| EN 20273:1991 | Fasteners - Clearance holes for bolts and screws (ISO 273:1979) |
| ISO 15330:1999 | Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method |
| ISO 9013:2017 | Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| EN 10163-2:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
| EN 13001-2:2014 | Crane safety - General design - Part 2: Load actions |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| EN 13001-1:2015 | Cranes - General design - Part 1: General principles and requirements |
| EN 22553:1994 | Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
| EN 10163-3:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections |
| EN ISO 15330:1999 | Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999) |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| ISO 273:1979 | Fasteners — Clearance holes for bolts and screws |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN 10025-6:2004+A1:2009 | Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| EN ISO 9013:2017 | Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017) |
| EN 10160:1999 | Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
| EN 10025-3:2004 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| EN ISO 17659:2004 | Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002) |
| ISO 17659:2002 | Welding — Multilingual terms for welded joints with illustrations |
| EN 10149-3:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.