EN 12862:2000
Current
The latest, up-to-date edition.
Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
24-05-2000
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions and symbols
4 Materials
5 Design
6 Construction and workmanship
7 Tests
8 Conformity evaluation
9 Identification marks
Annex A (normative) Corrosion tests
Annex B (normative) Test methods to determine sustained-
load-cracking resistance of aluminium
alloy cylinders
Annex C (normative) Prototype testing and production testing
Annex D (normative) Description, evaluation of manufacturing
defects and conditions for rejection of
welded aluminium alloy gas cylinders at
time of visual inspection
Annex E (informative) Examples of type approval and
production test certificates
Bibliography
This standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of refillable transportable welded aluminium alloy gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied and dissolved gases. This standard includes requirements for spherical cylinders.
Committee |
CEN/TC 23
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
NF EN 12862 : 2000 | Identical |
NS EN 12862 : 1ED 2000 | Identical |
PN EN 12862 : 2002 | Identical |
I.S. EN 12862:2000 | Identical |
BS EN 12862:2000 | Identical |
NBN EN 12862 : 2000 | Identical |
DIN EN 12862:2000-08 | Identical |
UNI EN 12862 : 2002 | Identical |
UNE-EN 12862:2001 | Identical |
NEN EN 12862 : 2000 | Identical |
SN EN 12862 : 2000 | Identical |
09/30186082 DC : 0 | BS EN 13110 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS - DESIGN AND CONSTRUCTION |
EN 12205:2001 | Transportable gas cylinders - Non refillable metallic gas cylinders |
DD ISO/TS 15869:2009 | Gaseous hydrogen and hydrogen blends. Land vehicle fuel tanks |
I.S. EN 12245:2009 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
NF EN 12245 : 2009 + A1 2012 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
08/30180643 DC : DRAFT APRIL 2008 | BS ISO 15869-3 - GASEOUS HYDROGEN AND HYDROGEN BLENDS - LAND VEHICLE FUEL TANKS |
DIN EN 12245:2012-03 | Transportable gas cylinders - Fully wrapped composite cylinders (includes Amendment A1:2011) |
UNI EN 12245 : 2011 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
12/30259634 DC : 0 | BS ISO 15399 - GASEOUS HYDROGEN - CYLINDERS AND TUBES FOR STATIONARY STORAGE |
ISO/TS 15869:2009 | Gaseous hydrogen and hydrogen blends Land vehicle fuel tanks |
UNE-EN 12245:2009 | Transportable gas cylinders - Fully wrapped composite cylinders |
EN 12245:2009+A1:2011 | Transportable gas cylinders - Fully wrapped composite cylinders |
BS EN 12205:2001 | Transportable gas cylinders. Non-refillable metallic gas cylinders |
EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
EN 30042 : 1994 | ARC WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS |
EN 1089-1 : 1996 | TRANSPORTABLE GAS CYLINDERS - GAS CYLINDER IDENTIFICATION (EXCLUDING LPG) - STAMPMARKING |
EN 288-4:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURES FOR THE ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
EN ISO 7539-6:2011 | Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement (ISO 7539-6:2011) |
EN 287-2:1992/A1:1997 | APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS |
EN 962:1996/A2:2000 | TRANSPORTABLE GAS CYLINDERS - VALVE PROTECTION CAPS AND VALVE GUARDS FOR INDUSTRIAL AND MEDICAL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTS |
EURONORM 6 : 1955 | FOLDING TEST FOR STEEL |
EURONORM 12 : 1955 | FOLDING TEST OF SHEET STEELS AND STRIPS WITH A THICKNESS OF LESS THAN 3 MM |
EN 10003-1 : 1994 | METALLIC MATERIALS - BRINELL HARDNESS TEST - TEST METHOD |
EN 970:1997 | Non-destructive examination of fusion welds - Visual examination |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.