EN 12697-24:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue
04-04-2019
23-05-2012
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Sample preparation
5 Failure
6 Calculations
7 Summary of the procedures
8 Checking of the testing equipment
9 Test report
Annex A (normative) - Two-point bending test on
trapezoidal shaped specimens
Annex B (normative) - Two-point bending test on
prismatic shaped specimens
Annex C (normative) - Three-point bending test on
prismatic shaped specimens
Annex D (normative) - Four-point bending test on
prismatic shaped specimens
Annex E (normative) - Indirect tensile test on
cylindrical shaped specimens
Bibliography
This European Standard specifies the methods for characterising the fatigue of bituminous mixtures usingalternative tests, including bending tests and direct and indirect tensile tests. The tests are performed oncompacted bituminous material under a sinusoidal loading or other controlled loading, using different types ofspecimens and supports.The procedure is used:a) to rank bituminous mixtures on the basis of resistance to fatigue;b) as a guide to relative performance in the pavement;c) to obtain data for estimating the structural behaviour of the road; andd) to judge test data according to specifications for bituminous mixtures.Because this European Standard does not impose a particular type of testing device, the precise choice of thetest conditions depends on the possibilities and the working range of the device used. For the choice ofspecific test conditions, the requirements of the product standards for bituminous mixtures need to berespected. The applicability of this document is described in the product standards for bituminous mixtures.Results obtained from different test methods or using different failure criteria are not assured to becomparable.
Committee |
CEN/TC 227
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NF EN 12697-24 : 2012 | Identical |
BS EN 12697-24:2012 | Identical |
NEN EN 12697-24 : 2012 | Identical |
ÖNORM EN 12697-24: 2019 04 01 | Identical |
DIN EN 12697-24:2018-11 | Identical |
SN 670424 : 2015 | Identical |
BS EN 12697-24:2018 | Identical |
PN EN 12697-24 : 2012 | Identical |
NBN EN 12697-24 : 2012 | Identical |
PN EN 12697-24 : 2018 | Identical |
I.S. EN 12697-24:2018 | Identical |
I.S. EN 12697-24:2012 | Identical |
UNI EN 12697-24 : 2012 | Identical |
SN 670424A : 2007 | Identical |
SN EN 12697-24 : 2015 | Identical |
DIN EN 12697-24:2016-01 (Draft) | Identical |
ONORM EN 12697-24 : 2012 | Identical |
UNI EN 12697-24 : 2018 | Identical |
UNE-EN 12697-24:2013 | Identical |
NS EN 12697-24:2018 | Identical |
NS EN 12697-24 : 2012 | Identical |
PREN 13108-5 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
13/30278717 DC : 0 | BS EN 13108-5 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
PREN 13108-20 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
13/30278708 DC : 0 | BS EN 13108-1 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
08/30182305 DC : DRAFT JULY 2008 | BS EN 12697-44 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 44: CRACK PROPAGATION BY SEMI-CIRCULAR BENDING TEST |
PREN 13108-1 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
PREN 12697-44 : DRAFT 2017 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 44: CRACK PROPAGATION BY SEMI-CIRCULAR BENDING TEST |
BS EN 13108-5:2016 | Bituminous mixtures. Material specifications Stone Mastic Asphalt |
I.S. EN 13108-20:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
I.S. EN 13108-5:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
I.S. EN 13108-1:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
13/30278735 DC : 0 | BS EN 13108-20 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
BS EN 12697-44:2010 | Bituminous mixtures. Test methods for hot mix asphalt Crack propagation by semi-circular bending test |
UNI EN 12697-44 : 2010 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 44: CRACK PROPAGATION BY SEMI-CIRCULAR BENDING TEST |
I.S. EN 12697-44:2010 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 44: CRACK PROPAGATION BY SEMI-CIRCULAR BENDING TEST |
EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
DIN EN 12697-44:2010-12 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 44: CRACK PROPAGATION BY SEMI-CIRCULAR BENDING TEST |
BS EN 13108-1:2016 | Bituminous mixtures. Material specifications Asphalt Concrete |
BS EN 13108-20:2016 | Bituminous mixtures. Material specifications Type Testing |
17/30360938 DC : 0 | BS EN 12697-44 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 44: CRACK PROPAGATION BY SEMI-CIRCULAR BENDING TEST |
EN 12697-44:2010 | Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test |
EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
EN 12697-8:2003 | Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens |
EN 12697-6:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens |
EN 12697-27:2017 | Bituminous mixtures - Test methods - Part 27: Sampling |
EN 12697-26:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness |
EN 12697-33:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor |
EN 12697-31:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
NFP 98 261-1 : 2001 | TEST RELATING TO PAVEMENTS - DETERMINATION OF THE FATIGUE RESISTANCE OF BITUMINOUS MIXTURES - PART 1: TWO POINTS FLEXURAL FATIGUE TEST WITH CONSTANT DISPLACEMENT ON TRAPEZOIDAL ISOCEL SPECIMENS |
EN 12697-29:2002 | Bituminous mixtures - Test method for hot mix asphalt - Part 29: Determination of the dimensions of a bituminous specimen |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.