EN 12697-22:2003+A1:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking
23-02-2022
04-07-2007
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Principle
6 Apparatus
6.1 Large size devices
6.2 Extra large Devices
6.3 Small size devices
6.4 Small-size devices for use with cores
7 Sampling and sample preparation
7.1 Sampling and manufacture
7.2 Thickness and surface regularity
7.3 Transport and storage of unmounted specimens
7.4 Sample preparation
8 Procedure for carrying out a single measurement
8.1 Large size devices
8.2 Extra-large size device
8.3 Small size devices
9 Calculation and expression of results
9.1 Large size devices
9.2 Extra-large size device
9.3 Small size devices
10 Test report
10.1 Obligatory information
10.2 Complementary information
11 Precision
11.1 General
11.2 Laboratory prepared samples, proportional rut depth,
large size devices
11.3 Samples cored from a pavement and laboratory prepared
samples, wheel-tracking rate, small-size devices,
conditioning in air
Bibliography
This European Standard describes test methods for determining the susceptibility of bituminous materials to deform under load. The test is applicable to mixtures with upper sieve size less than or equal to 32 mm.The tests are applicable to specimens that have either been manufactured in a laboratory or cut from a pavement; test specimens are held in a mould with their surface flush with the upper edge of the mould.The susceptibility of bituminous materials to deform is assessed by the rut formed by repeated passes of a loaded wheel at constant temperature. Three alternative types of device can be used according to this standard: large-size devices, extra large-size devices and small-size devices. With large-size devices and extra large-size devices, the specimens are conditioned in air during testing. With small-size devices, specimens are conditioned, in either air or water.NOTELarge-size and extra large-size devices are not suitable for use with cylindrical cores.
Committee |
CEN/TC 227
|
DevelopmentNote |
2003 Edition Re-Issued in July 2007 & incorporates AMD 1 2007. (07/2007)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NF EN 12697-22 : 2004 + A1 2007 | Identical |
NBN EN 12697-22 : 2004 + A1 2007 | Identical |
NEN EN 12697-22 : 2004 + A1 2007 | Identical |
NS EN 12697-22 : 2003 + A1 2007 | Identical |
I.S. EN 12697-22:2004 | Identical |
PN EN 12697-22 : 2008 + A1 2008 | Identical |
SN 670422A-NA : 2007 | Identical |
SN EN 12697-22 : 2004 + A1 2007 | Identical |
UNI EN 12697-22 : 2007 | Identical |
BS EN 12697-22:2003 | Identical |
DIN EN 12697-22:2013-12 (Draft) | Identical |
ONORM EN 12697-22 : 2007 | Identical |
UNE-EN 12697-22:2008+A1:2008 | Identical |
DIN EN 12697-22:2007-10 | Identical |
13/30278735 DC : 0 | BS EN 13108-20 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
13/30278717 DC : 0 | BS EN 13108-5 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
PREN 13108-5 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
13/30278711 DC : 0 | BS EN 13108-4 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
PREN 13108-20 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
EN 13108-2:2016 | Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) |
EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
13/30278708 DC : 0 | BS EN 13108-1 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
PREN 13108-1 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
I.S. EN 13108-4:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
BS EN 13108-5:2016 | Bituminous mixtures. Material specifications Stone Mastic Asphalt |
I.S. EN 13108-2:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: ASPHALT CONCRETE FOR VERY THIN LAYERS (BBTM) |
I.S. EN 13108-20:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
I.S. EN 13108-5:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
I.S. EN 13108-1:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
PREN 13108-4 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
BS EN 13108-2:2016 | Bituminous mixtures. Material specifications Asphalt Concrete for Very Thin Layers (BBTM) |
18/30368690 DC : 0 | BS EN 13108-31 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
BS EN 13108-1:2016 | Bituminous mixtures. Material specifications Asphalt Concrete |
BS EN 13108-20:2016 | Bituminous mixtures. Material specifications Type Testing |
PREN 13108-31 : DRAFT 2018 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
BS EN 13108-4:2016 | Bituminous mixtures. Material specifications Hot Rolled Asphalt |
EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
EN 12697-6:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens |
EN 12697-27:2017 | Bituminous mixtures - Test methods - Part 27: Sampling |
EN 12697-33:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor |
ISO 7619:1997 | Rubber Determination of indentation hardness by means of pocket hardness meters |
ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
EN 12697-32:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor |
EN 12697-35:2016 | Bituminous mixtures - Test methods - Part 35: Laboratory mixing |
EN 12697-7:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.