EN 12697-12:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens
20-06-2018
18-06-2008
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
5.1 Method A
5.2 Method B
5.3 Method C
6 Specimen preparation
6.1 Method A
6.2 Method B
6.3 Method C
7 Test procedure
7.1 Method A
7.2 Method B
7.3 Method C
8 Calculation
8.1 Method A
8.2 Method B
8.3 Method C
9 Test report
9.1 Methods A and B
9.2 Method C
10 Precision
10.1 Method A
10.2 Method B
10.3 Method C
Bibliography
This European Standard describes three test methods for determining the effect of saturation and accelerated water conditioning. These methods can be used to evaluate the effect of moisture with or without anti-stripping additives including liquids, such as amines, and fillers, such as hydrated lime or cement:method A uses the indirect tensile strength of cylindrical specimens of bituminous mixtures;method B uses the compression strength of cylindrical specimens of bituminous mixtures;method C defines the bonding value of soft asphalt mixtures 1 h after mixing, where the bonding of bitumen and aggregate can be equated to a bonding value.Method A and method B give the same result in average. However, if the slenderness of the specimens is less than 0,5, method B is not suitable. Method C is suitable for soft asphalt mixtures with bitumen of viscosity at 60 ºC of 4000 mm2/s or less, for which methods A and B are not suitable.NOTE Methods A and B are suitable for soft asphalt mixtures with bitumen of viscosity at 60 ºC greater than 4000 mm2/s.
Committee |
CEN/TC 227
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
BS EN 12697-12:2018 | Identical |
ÖNORM EN 12697-12:2018 | Identical |
NF EN 12697-12 : 2008 | Identical |
I.S. EN 12697-12:2008 | Identical |
SN EN 12697-12 : 2008 | Identical |
NEN EN 12697-12 : 2008 | Identical |
UNI EN 12697-12:2018 | Identical |
PN EN 12697-12 : 2008 | Identical |
DIN EN 12697-12:2015-12 (Draft) | Identical |
NS EN 12697-12:2018 | Identical |
NBN EN 12697-12 : 2008 | Identical |
UNI EN 12697-12 : 2008 | Identical |
SN 670415A-NA : 2008 | Identical |
ONORM EN 12697-12 : 2008 | Identical |
PN EN 12697-12:2018 | Identical |
NS EN 12697-12 : 2ED 2008 | Identical |
I.S. EN 12697-12:2018 | Identical |
DIN EN 12697-12:2018-10 | Identical |
UNE-EN 12697-12:2009 | Identical |
BS EN 12697-12:2008 | Identical |
13/30278708 DC : 0 | BS EN 13108-1 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
13/30278735 DC : 0 | BS EN 13108-20 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
13/30278717 DC : 0 | BS EN 13108-5 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
PREN 13108-5 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
13/30278711 DC : 0 | BS EN 13108-4 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
13/30278723 DC : 0 | BS EN 13108-2 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: VERY THIN LAYER ASPHALT CONCRETE (BBTM) |
15/30326843 DC : 0 | BS EN 12697-23 - BITUMINOUS MIXTURES - TEST METHODS - PART 23: DETERMINATION OF THE INDIRECT TENSILE STRENGTH OF BITUMINOUS SPECIMENS |
PREN 12697-23 : DRAFT 2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 23: DETERMINATION OF THE INDIRECT TENSILE STRENGTH OF BITUMINOUS SPECIMENS |
PREN 13108-20 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
BS EN 13108-3:2016 | Bituminous mixtures. Material specifications Soft Asphalt |
BS EN 12591:2009 | Bitumen and bituminous binders. Specifications for paving grade bitumens |
EN 13108-2:2016 | Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) |
EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
BS EN 13924-2:2014 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Multigrade paving grade bitumens |
13/30278705 DC : 0 | BS EN 13108-9 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 9: ASPHALT FOR ULTRA-THIN-LAYERS (AUTL) |
11/30247867 DC : 0 | BS EN 13924-2 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL BITUMEN - PART 2: MULTIGRADE BITUMENOUS BINDERS |
BS EN 13924-1:2015 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Hard paving grade bitumens |
PREN 13108-2 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: VERY THIN LAYER ASPHALT CONCRETE (BBTM) |
PREN 13108-1 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
UNI EN 13924-2 : 2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
I.S. EN 13108-4:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
BS EN 13108-5:2016 | Bituminous mixtures. Material specifications Stone Mastic Asphalt |
I.S. EN 13108-2:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: ASPHALT CONCRETE FOR VERY THIN LAYERS (BBTM) |
I.S. EN 13108-20:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
I.S. EN 13108-5:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
I.S. EN 12591:2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
I.S. EN 13108-1:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
I.S. EN 13108-3:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 3: SOFT ASPHALT |
DIN EN 12591:2009-08 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
DIN EN 13924-2:2014-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
DIN EN 13924-1:2016-02 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
PREN 13108-4 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
DIN EN 1744-4:2005-10 | Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures |
EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
BS EN 13108-2:2016 | Bituminous mixtures. Material specifications Asphalt Concrete for Very Thin Layers (BBTM) |
UNI EN 12591 : 2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
PD CEN/TS 12697-50:2016 | Bituminous mixtures. Test methods Resistance to scuffing |
18/30368690 DC : 0 | BS EN 13108-31 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
CEN/TS 12697-50:2016 | Bituminous mixtures - Test methods - Part 50: Resistance to scuffing |
BS EN 13108-1:2016 | Bituminous mixtures. Material specifications Asphalt Concrete |
BS EN 1744-4:2005 | Tests for chemical properties of aggregates Determination of water susceptibility of fillers for bituminous mixtures |
BS EN 13108-20:2016 | Bituminous mixtures. Material specifications Type Testing |
EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
ONORM EN 1744-4 : 2005 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
EN 13924-2:2014 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens |
I.S. EN 13924:2006 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
I.S. EN 13924-2:2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
13/30255316 DC : 0 | BS EN 13924-1 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
S.R. CEN/TS 12697-50:2016 | BITUMINOUS MIXTURES - TEST METHODS - PART 50: RESISTANCE TO SCUFFING |
PREN 12591 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
I.S. EN 13924-1:2015 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
PREN 13108-31 : DRAFT 2018 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
BS EN 13108-4:2016 | Bituminous mixtures. Material specifications Hot Rolled Asphalt |
BS EN 13924:2006 | Bitumen and bituminous binders. Specifications for hard paving grade bitumens |
EN 13108-3:2016 | Bituminous mixtures - Material specifications - Part 3: Soft Asphalt |
EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
I.S. EN 1744-4:2005 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
DIN EN 13924:2006-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
EN 1744-4:2005 | Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures |
EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
EN 12697-30:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor |
EN 12697-8:2003 | Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens |
EN 12697-6:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens |
EN 12697-27:2017 | Bituminous mixtures - Test methods - Part 27: Sampling |
EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
EN 12697-33:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor |
EN 12697-31:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor |
EN 12697-32:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor |
EN 12697-29:2002 | Bituminous mixtures - Test method for hot mix asphalt - Part 29: Determination of the dimensions of a bituminous specimen |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.