EN 12504-2:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number
28-07-2021
12-09-2012
Foreword
1 Scope
2 Normative references
3 Principle
4 Apparatus
5 Test location
6 Procedure
7 Test result
8 Test report
9 Precision
Bibliography
This European Standard specifies a method for determining the rebound number of an area of hardened concrete using a spring-driven hammer.NOTE 1The rebound number determined by this method can be used to assess the uniformity of concrete in situ, to delineate zones or areas of poor quality or deteriorated concrete in structures.NOTE 2The test method is not intended as an alternative for the compressive strength determination of concrete (EN 12390-3), but with suitable correlation, it can provide an estimate of in situ compressive strength. For the assessment of in-situ compressive strength see EN 13791.NOTE 3The hammer may be used for comparative testing, referenced against a concrete with known strength or against a concrete which has been shown that it has come from a defined volume of concrete with a population verified as conforming to a particular strength class.
| Committee |
CEN/TC 104
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN 12504-2 : 2013 | Identical |
| NBN EN 12504-2 : 2012 | Identical |
| UNI EN 12504-2 : 2012 | Identical |
| PN EN 12504-2 : 2013 | Identical |
| UNE-EN 12504-2:2013 | Identical |
| I.S. EN 12504-2:2012 | Identical |
| NF EN 12504-2 : 2013 | Identical |
| BS EN 12504-2:2012 | Identical |
| DIN EN 12504-2:2012-12 | Identical |
| NEN EN 12504-2 : 2012 | Identical |
| SN EN 12504-2 : 2012 | Identical |
| NS EN 12504-2 : 2012 | Identical |
| 17/30354239 DC : 0 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| 17/30349922 DC : 0 | BS EN 13791 - ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| PREN 12503-4 : DRAFT 2012 | SPORTS MATS - PART 4: DETERMINATION OF SHOCK ABSORPTION |
| BS EN 206 : 2013 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| BS EN 13791:2007 | Assessment of in-situ compressive strength in structures and pre-cast concrete components |
| CEN/TS 16717:2015 | Surface for sports areas - Method of test for the determination of shock absorption, vertical deformation and energy restitution using the advanced artificial athlete |
| ONORM EN 14487-1 : 2006 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| I.S. EN 13791:2007 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| DIN 1045-4:2012-02 | Concrete, reinforced and prestressed concrete structures - Part 4: Additional rules for the production and the conformity of prefabricated elements |
| S.R. CEN/TS 16717:2015 | SURFACE FOR SPORTS AREAS - METHOD OF TEST FOR THE DETERMINATION OF SHOCK ABSORPTION, VERTICAL DEFORMATION AND ENERGY RESTITUTION USING THE ADVANCED ARTIFICIAL ATHLETE |
| BS EN 13369:2013 | Common rules for precast concrete products |
| DIN EN 14487-1:2006-03 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| I.S. EN 14487-1:2005 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| I.S. EN 206-1:2002 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY (INCLUDING IRISH NATIONAL ANNEX) |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| 03/306075 DC : DRAFT APR 2003 | BS EN 13791 - ASSESSMENT OF CONCRETE COMPRESSIVE STRENGTH IN STRUCTURES OR IN STRUCTURAL ELEMENTS |
| UNI EN 13369 : 2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| DIN EN 13369:2013-08 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 13369:2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| DIN EN 13791:2008-05 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| UNI EN 13791 : 2008 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| EN 14487-1:2005 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| PREN 13369 : DRAFT 2017 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| 12/30268678 DC : 0 | BS EN 12503-4 - SPORTS MATS - PART 4: DETERMINATION OF SHOCK ABSORPTION |
| 12/30257889 DC : 0 | BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| DIN EN 206:2014-07 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| BS EN 14487-1:2005 | Sprayed concrete Definitions, specifications and conformity |
| BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
| EN 13791:2007 | Assessment of in-situ compressive strength in structures and precast concrete components |
| PD CEN/TS 16717:2015 | Surface for sports areas. Method of test for the determination of shock absorption, vertical deformation and energy restitution using the advanced artificial athlete |
| PREN 13791 : DRAFT 2017 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| UNE-EN 13369:2013 | Common rules for precast concrete products |
| I.S. EN 13369:2018 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| EN 13369:2018 | Common rules for precast concrete products |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| EN 12504-4:2004 | Testing concrete - Part 4: Determination of ultrasonic pulse velocity |
| EN 13791:2007 | Assessment of in-situ compressive strength in structures and precast concrete components |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.