EN 12167:2016
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Copper and copper alloys - Profiles and bars for general purposes
Withdrawn date
31-01-2017
Published date
20-07-2016
Publisher
Sorry this product is not available in your region.
European Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection documentation
10 Marking, packaging, labelling
Bibliography
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy profiles including L-, T-, U-shaped cross-sections, and bars, finally produced by drawing or extruding.This European Standard applies to profiles with L-, T- and U-shaped cross-sections which would fit within a circumscribing circle of a maximum 180 mm diameter and to bars with thicknesses from 3 mm up to and including 60 mm and with widths from 6 mm up to and including 120 mm.The sampling procedures, the methods of test for verification of conformity to the requirements of this European Standard, are also specified.
| Committee |
CEN/TC 133
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| UNI EN 12167:2016 | Identical |
| NS EN 12167 : 2016 | Identical |
| NEN EN 12167 : 2016 | Identical |
| UNI EN 12167 : 2011 | Identical |
| UNE-EN 12167:2017 | Identical |
| PN EN 12167 : 2016 | Identical |
| NBN EN 12167 : 2011 | Identical |
| NF EN 12167 : 2016 | Identical |
| DIN EN 12167:2015-12 (Draft) | Identical |
| I.S. EN 12167:2016 | Identical |
| SN EN 12167 : 2016 | Identical |
| BS EN 12167:2011 | Identical |
| SS-EN 12167:2016 | Identical |
| DS EN 12167 : 2016 | Identical |
| DIN EN 12167:1998-04 | Identical |
| BS EN 12167:2016 | Identical |
| 17/30350901 DC : 0 | BS EN 215 - THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| EN 12516-4:2014 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| 05/30134037 DC : 0 | EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| DIN CEN/TS 13547:2007-02 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| UNE-EN 13547:2014 | Industrial valves - Copper alloy ball valves |
| UNI EN 13601 : 2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| UNI EN 13605 : 2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| DD CEN/TS 13388:2008 | Copper and copper alloys. Compendium of compositions and products |
| I.S. EN 13547:2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| BS EN 12861:1999 | Copper and copper alloys. Scrap |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| PD CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications Design method |
| I.S. EN 215:2004 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| DIN EN 13605:2013-09 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| BS EN 12288:2010 | Industrial valves. Copper alloy gate valves |
| UNE-EN 331:2016 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| I.S. EN 13601:2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| I.S. EN 12288:2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| EN 12288:2010 | Industrial valves - Copper alloy gate valves |
| EN 13547:2013 | Industrial valves - Copper alloy ball valves |
| CEN/TS 13547:2006 | Industrial valves - Copper alloy ball valves |
| PREN 13605 : DRAFT 2011 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| PREN 13601 : DRAFT 2011 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| PREN 1503-4 : DRAFT 2015 | VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 4: COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS |
| DD CEN/TS 13547:2006 | Industrial valves. Copper alloy ball valves |
| ISO 6509-2:2017 | Corrosion of metals and alloys Determination of dezincification resistance of copper alloys with zinc Part 2: Assessment criteria |
| S.R. CEN/TS 13388:2015 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| PD CEN/TS 13388:2015 | Copper and copper alloys. Compendium of compositions and products |
| DIN EN 12516-4:2015-01 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| DIN EN 12288:2010-10 | Industrial valves - Copper alloy gate valves |
| I.S. EN 331:2015 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| I.S. EN 13605:2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| I.S. EN 1503-4:2016 | VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS |
| DIN SPEC 9700 E : 2013 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| PREN 12516-4 : DRAFT 2011 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| I.S. EN 12516-4:2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 09/30205880 DC : DRAFT OCT 2009 | BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| 11/30249111 DC : 0 | BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 15/30322049 DC : DRAFT MAY 2015 | BS EN 1503-4 - VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 4: COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS |
| 11/30240456 DC : 0 | BS EN 13601 - COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| UNI EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| PD 6641:1999 | Copper and copper alloys. Compendium of compositions and products |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| UNI EN 13547 : 2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| I.S. CEN TS 13547:2006 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| DIN EN 331:2016-04 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| UNI EN 12288 : 2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| DIN EN 13547:2013-12 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| 11/30240468 DC : 0 | BS EN 13605 - COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| BS EN 13547:2013 | Industrial valves. Copper alloy ball valves |
| BS EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| PREN 12288 : DRAFT 2009 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| S.R. CEN/TR 14585-3:2017 | CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 12861:2018 | Copper and copper alloys - Scrap |
| I.S. EN 12861:1999 | COPPER AND COPPER ALLOYS - SCRAP |
| I.S. CEN TS 13388:2004 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| DIN EN 215:2007-11 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| DIN EN 1503-4:2016-06 | VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 4: COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS |
| BS EN 13605:2013 | Copper and copper alloys. Copper profiles and profiled wire for electrical purposes |
| UNE-CEN/TS 13388:2010 EX | Copper and copper alloys - Compendium of compositions and products |
| BS EN 215:2004 | Thermostatic radiator valves. Requirements and test methods |
| UNE-EN 13601:2014 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| BS EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| BS EN 13601:2013 | Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
| CEN/TS 13388:2015 | Copper and copper alloys - Compendium of compositions and products |
| EN 215 : 2004 AMD 1 2006 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications - Part 3: Design method |
| EN 13605:2013 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| EN 13601:2013 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| UNE-EN 12516-4:2016 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| DIN EN 13601:2013-09 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| BS EN 1503-4:2016 | Valves. Materials for bodies, bonnets and covers Copper alloys specified in European Standards |
| DIN CEN/TS 13388;DIN SPEC 9700:2013-05 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN 14977:2006 | Copper and copper alloys - Detection of tensile stress - 5 % ammonia test |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 6509-1:2014 | Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 1811-2:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| EN ISO 6509-1:2014 | Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 4739:1985 | Wrought copper and copper alloy products — Selection and preparation of specimens and test pieces for mechanical testing |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.