EN 12004:2007+A1:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
01-02-2017
20-06-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Evaluation of conformity
6 Classification and designation
7 Marking and labelling
Annex A (normative) - Failure patterns
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Directive
Bibliography
This European Standard is applicable to ceramic tile cementitious adhesives, dispersion adhesives and reaction resin adhesives for internal and external tile installations on walls and floors.This standard gives the terminology concerning the products, working methods, application properties, etc, for ceramic tile adhesives.This European Standard specifies the values of performance requirements for ceramic tile adhesives (cementitious, dispersion and reaction resin adhesives).This European Standard does not provide criteria or recommendations for the design and installation of ceramic tiles.NOTECeramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.
| Committee |
CEN/TC 67
|
| DevelopmentNote |
Supersedes EN 1322. (12/2002) 2007 Edition Re-issued in June 2012 & incorporates AMD 1 2012. (07/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NS EN 12004 : 2007 + A1 2012 | Identical |
| UNE-EN 12004:2008 | Identical |
| BS EN 12004 : 2007 | Identical |
| UNI EN 12004 : 2012 | Identical |
| PN EN 12004 : 2008 + A1 2012 | Identical |
| NF EN 12004 : 2008 + A1 2012 | Identical |
| NEN EN 12004 : 2008 + A1 2012 | Identical |
| I.S. EN 12004:2007 | Identical |
| SN EN 12004 : 2007 + A1 2012 | Identical |
| NBN EN 12004 : 2008 + A1 2012 | Identical |
| DIN EN 12004:2014-02 | Identical |
| UNE-EN 12004:2008+A1:2012 | Identical |
| 06/30153639 DC : 0 | EN 1348 - ADHESIVES FOR TILES - DETERMINATION OF TENSILE ADHESION STRENGTH FOR CEMENTITIOUS ADHESIVES |
| 06/30153633 DC : 0 | EN 1346 - ADHESIVES FOR TILES - DETERMINATION OF OPEN TIME |
| DIN EN 1469:2015-05 | NATURAL STONE PRODUCTS - SLABS FOR CLADDING - REQUIREMENTS |
| BS EN 14411:2012 | Ceramic tiles. Definitions, classification, characteristics, evaluation of conformity and marking |
| DIN EN 14617-12:2012-06 | Agglomerated stone - Test methods - Part 12: Determination of dimensional stability |
| EN 1348:2007 | Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives |
| 12/30254418 DC : DRAFT JAN 2012 | BS EN 1469 - NATURAL STONE PRODUCTS - SLABS FOR CLADDING - REQUIREMENTS |
| PREN 14411 : DRAFT 2015 | CERAMIC TILES - DEFINITIONS, CLASSIFICATION, CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| 11/30248435 DC : 0 | BS EN 14891 - LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| DIN EN 1348:2007-11 | ADHESIVES FOR TILES - DETERMINATION OF TENSILE ADHESION STRENGTH FOR CEMENTITIOUS ADHESIVES |
| DIN EN 1346:2007-11 | ADHESIVES FOR TILES - DETERMINATION OF OPEN TIME |
| I.S. EN 14411:2016 | CERAMIC TILES - DEFINITION, CLASSIFICATION, CHARACTERISTICS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE AND MARKING |
| I.S. EN 14617-12:2012 | AGGLOMERATED STONE - TEST METHODS - PART 12: DETERMINATION OF DIMENSIONAL STABILITY |
| I.S. EN 1469:2015 | NATURAL STONE PRODUCTS - SLABS FOR CLADDING - REQUIREMENTS |
| 06/30150443 DC : DRAFT MAY 2006 | EN 14411 - CERAMIC TILES - DEFINITIONS, CLASSIFICATION, CHARACTERISTICS AND MARKING |
| I.S. EN 1346:2007 | ADHESIVES FOR TILES - DETERMINATION OF OPEN TIME |
| 15/30329398 DC : 0 | BS EN 14411 - CERAMIC TILES - DEFINITION, CLASSIFICATION, CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| 06/30119204 DC : 0 | EN 14891 - LIQUID-APPLIED WATERPROOFING MEMBRANES FOR USE BENEATH CERAMIC TILING - DEFINITIONS, SPECIFICATIONS AND TEST METHODS |
| UNE-EN 14617-12:2012 | Agglomerated stone - Test methods - Part 12: Determination of dimensional stability |
| BS EN 1348:1999 | Adhesives for tiles. Determination of tensile adhesion strength for cementitious adhesives |
| UNE-EN 1469:2015 | Natural stone products - Slabs for cladding - Requirements |
| UNI EN 1348 : 2008 | ADHESIVES FOR TILES - DETERMINATION OF TENSILE ADHESION STRENGTH FOR CEMENTITIOUS ADHESIVES |
| UNI EN 14617-12 : 2012 | AGGLOMERATED STONE - TEST METHODS - PART 12: DETERMINATION OF DIMENSIONAL STABILITY |
| EN 14617-12:2012 | Agglomerated stone - Test methods - Part 12: Determination of dimensional stability |
| UNI EN 14411 : 2012 | CERAMIC TILES - DEFINITIONS, CLASSIFICATION, CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 1348:2007 | ADHESIVES FOR TILES - DETERMINATION OF TENSILE ADHESION STRENGTH FOR CEMENTITIOUS ADHESIVES |
| 12/30243066 DC : 0 | BS EN 14411 - CERAMIC TILES - DEFINITIONS, CLASSIFICATION, CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 14617-12:2012 | Agglomerate stone. Test methods Determination of dimensional stability |
| EN 1469:2015 | Natural stone products - Slabs for cladding - Requirements |
| EN 14411:2016 | Ceramic tiles - Definition, classification, characteristics, assessment and verification of constancy of performance and marking |
| BS EN 1469:2015 | Natural stone products. Slabs for cladding. Requirements |
| BS EN 1346:1999 | Adhesives for tiles. Determination of open time |
| EN 1346:2007 | Adhesives for tiles - Determination of open time |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| EN 1346:2007 | Adhesives for tiles - Determination of open time |
| EN 1324:2007 | Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives |
| EN 1348:2007 | Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 12808-1:2008 | Grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 1308:2007 | Adhesives for tiles - Determination of slip |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 12002:2008 | Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 14411:2016 | Ceramic tiles - Definition, classification, characteristics, assessment and verification of constancy of performance and marking |
| EN 1347:2007 | Adhesives for tiles - Determination of wetting capability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.