DOD STD 100 : C NOTICE 6
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ENGINEERING DRAWING PRACTICES
Published date
12-01-2013
Publisher
Superseded date
03-04-1987
Superseded by
Sorry this product is not available in your region.
Covers preparation and revision of engineering drawings and lists prepared by or for Department of Defense as specified in DOD-D-1000.
| DocumentType |
Standard
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| MIL-A-85802 Base Document:1986 | ACTUATOR, ELECTROMECHANICAL, LINEAR |
| MIL C 83166 : LATEST | CONVERTER MULTIPLEXER, SIGNAL DATA, GENERAL SPECIFICATION FOR |
| MIL-A-52679 Revision B:1983 | Anchor, Surfacing Membrane: 12 Inch (No S/S Document) |
| MIL M 81927 : B | MANUAL, TECHNICAL, GENERAL STYLE AND FORMAT OF (WORK PACKAGE CONCEPT) |
| MIL-C-70723 Base Document:1993 | Cartridge, Caliber .50, M-858 Ball and M-860 Tracer Short Range Training Ammunition |
| MIL-J-26149 Revision E:1988 | Jack, Hydraulic, Aircraft Maintenance, General Specification for |
| BS EN 61182-2-2:2012 | Printed board assembly products. Manufacturing description data and transfer methodology Sectional requirements for implementation of printed board fabrication data description |
| MIL-HDBK-59 Revision B:1994 | Continuous Acquisition and Life-Cycle (CALS) Support Implementation Guide (No S/S Document) |
| MIL-A-24741 Base Document:1990 | Assemblies, Metal electrical Backplane, One and Two Layer, General Specification for |
| MIL-A-26846 Revision B:1984 | Air Conditioner, A/M32C-4, Trailer Mounted, Vapor Cycle, Electric, Motor Driven (No S/S Document) |
| MIL-C-5809 Revision G:1987 | Circuit Breakers, Trip-Free, Aircraft, General Specification for (S/S by SAE-AS58091) |
| MIL T 6396 : E | TANKS, AIRCRAFT PROPULSION FLUID SYSTEM, INTERNAL REMOVABLE, NON-SELF-SEALING |
| MIL H 26385 : E | HOSE, OXYGEN AND PRESSURIZATION, OZONE RESISTANT |
| MIL I 27197 : C | INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED |
| MIL-A-5885 Revision D:1987 | Accelerometer, Aircraft (No S/S Document) |
| MIL-F-8839 Revision A:1988 | Fittings, Lubrication, Drive Type (No S/S Document) |
| MIL-F-85421 Revision B:1986 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAM, 3000/4000 PSI - GENERAL SPECIFICATION FOR |
| MIL-C-8605 Revision B:1990 | Cap; Pressure Fuel Servicing |
| MIL-P-85833 Base Document:1989 | PROTECTIVE ASSEMBLY, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL |
| MIL-T-27305 Revision C:1987 | Transmitter, Rate of Flow |
| MIL-STD-372 Base Document:1988 | WELDING, GAS METAL-ARC AND GAS TUNGSTEN-ARC, ALUMINUM ALLOYS, READILY WELDABLE FOR STRUCTURES, EXCLUDING ARMOR (SEE NOTICE 3 FOR REPLACEMENT INFORMATION) |
| MIL-C-87972 Revision A:1987 | Casters, Rigid and Swivel, General Specification for |
| MIL-A-85072 Revision A:1987 | Actuator, Electromechanical, Linear |
| MIL-T-83823 Base Document:1991 | TRUCK, FIRE FIGHTING (STRUCTURAL OR BRUSH-STRUCTURAL, 1,250 GPM, 4 X 2 OR 4 X 4 CHASSIS) (NO S/S DOCUMENT) |
| MIL STD 2080 : 0 | MAINTENANCE ENGINEERING, PLANNING AND ANALYSIS FOR AERONAUTICAL SYSTEMS, SUBSYSTEMS, EQUIPMENT AND SUPPORT EQUIPMENT |
| MIL-B-385 Revision G:1985 | Breakers, Paving, Pneumatic Powered (7/8 Inch Hexagon by 2 3/4 Inch Chuck and 7/8 Inch Hexagon by 3 1/4 Inch Chuck) (S/S by A-A-52558) |
| MIL-STD-1943 Base Document:1985 | WELDING REPAIR OF STEEL CASTINGS (OTHER THAN ARMOR) METAL-ARC, MANUAL (S/S BY ASTM-A488/A488M) |
| MIL V 85855 : 0 | VALVE, QUICK DISCONNECT, FOR THE PROTECTIVE ASSEMBLY, CHEMICAL, RADIOLOGICAL |
| MIL-I-27202 Revision A:1980 | Indicator, Electrical Tachometer, 0-110 Percent RPM 2-Inch Size, Integrally Lighted |
| SAE AS5944 | Slings, Aircraft, General Specification For |
| PD IEC/PAS 61182-12:2014 | Generic requirements for printed board assembly products manufacturing description data and transfer methodology |
| IEC 61182-2:2006 | Printed board assembly products - Manufacturing description data and transfer methodology - Part 2: Generic requirements |
| EN 61182-2-2:2012 | Printed board assembly products - Manufacturing description data and transfer methodology - Part 2-2: Sectional requirements for implementation of printed board fabrication data description |
| MIL-W-5088 Revision L:1991 | Wiring, Aerospace Vehicle (Future Design Should Refer to SAE-AS50881) |
| MIL-A-83477 Revision A:1976 | Air Conditioner, A/M32C-18 Trailer Mounted, Diesel Engine Driven (No S/S Document) |
| MIL-C-85521 Base Document:1983 | Concentrator, Oxygen, GGU-7/A |
| MIL V 7891 : E | VALVE, OXYGEN FILLER, LOW AND PRESSURE |
| MIL-C-85829 Base Document:1989 | COUPLING ASSEMBLY, HOSE, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE |
| MIL-HDBK-288 Revision B:1991 | Review and Acceptance of Engineering Drawing Packages |
| MIL-STD-2097 Revision A:1989 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT (S/S BY MIL-HDBK-2097) |
| MIL-C-70726 Revision A:1993 | Cartridge, Caliber .50, Blank, XM928, Performance Specification for (No S/S Document) |
| MIL-H-4607 Revision E:1987 | Heater, Engine and Shelter, Ground Type H-1 (No S/S Document) |
| MIL-A-28870 Revision A:1990 | Assemblies, Electrical Backplane, Printed-Wiring, General Specification for |
| MIL-T-47500-1 Base Document:1989 | Technical Data Package,Drawings, Design (Future Acquisitions may refer to: MIL-STD-31000) |
| MIL T 38804 : B | TIME COMPLIANCE TECHNICAL ORDERS (TCTOS) PREPARATION OF |
| MIL T 38170 : F | TANK, MOBILE STORAGE, LIQUID OXYGEN TMU 27/M |
| MIL-A-81918 Base Document:1976 | Adapter, Launcher, Aircraft, ADU-299A/A |
| MIL-M-70466 Base Document:1993 | MACHINE GUN, 7.62MM: M60E3 (NO S/S DOCUMENT) |
| MIL-A-26624 Revision B:1981 | Air Conditioner, A/M32C-5, Trailer Mounted, Vapor Cycle, Electric Motor Driven (No S/S Document) |
| MIL M 81929 : B | MANUAL, TECHNICAL, ILLUSTRATED PARTS BREAKDOWN, (WORK PACKAGE CONCEPT),PREPARATION OF |
| MIL R 83178 : A | REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC PRESSURE BREATHING, GENERAL SPECIFICATION FOR |
| MIL-I-25091 Revision B:1985 | Indicator, Cabin Air Pressure, Pressurized Aircraft, 1-7/8 Inch Dial, Type MA-2 |
| MIL-B-85598 Base Document:1988 | BEARINGS, ELASTOMERIC GENERAL SPECIFICATION FOR |
| MIL M 87158 : A | MANUALS, TECHNICAL, AIRCRAFT BATTLE DAMAGE ASSESSMENT AND REPAIR |
| MIL STD 1836 : NOTICE 1 | STANDARDIZATION & CONTROL PROGRAM FOR PARTS, MATERIALS & PROCESSES USED IN INTERCONTINENTAL BALLISTIC MISSILE WEAPON SYSTEMS |
| MIL-R-85895 Base Document:1988 | RACK, BOMB EJECTOR, AIRCRAFT BRU-32/A |
| MIL-S-85377 Revision A:1983 | SWITCH, STEPPING, DIRECT CURRENT AIRCRAFT DISPENSER |
| MIL-HDBK-817 Base Document:1994 | System Development Radiation Hardness Assurance |
| MIL-S-87233 Base Document:1985 | SUPPORT EQUIPMENT SYSTEMS (S/S BY AFGS-87233) |
| MIL-C-70724 Base Document:1992 | Cartridge, 5.56MM, Blank, M200A1 Performance Specification for |
| MIL-C-9082 Revision H:1986 | Converter, Oxygen, Aircraft, Liquid to Gaseous, General Specification for (No S/S Document) |
| MIL-STD-2198 Base Document:1990 | Design Requirements for Metal Electrical Backplane Assemblies |
| MIL-HDBK-2097 Revision A:1997 | Acquisition of Support Equipment and Associated Integrated Logistics Support |
| MIL-M-85831 Base Document:1989 | MASK, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE, NON-OXYGEN |
| MIL-C-4150 Revision J:1989 | Cases, Transit and Storage, Waterproof and Water-Vaporproof (No S/S Document) |
| IPC 2581 : B | GENERIC REQUIREMENTS FOR PRINTED BOARD ASSEMBLY PRODUCTS MANUFACTURING DESCRIPTION DATA AND TRANSFER METHODOLOGY |
| MIL-D-81992 Revision B:1994 | Directives, Technical; Preparation of |
| MIL-R-85880 Base Document:1988 | ROCKET, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| DOD-STD-1702 Base Document:1985 | Integrated Logistics Support Programs for Equipment, Subsystems, and Systems (Metric) (No S/S Document) |
| MIL-M-7997 Revision C:1981 | Motor, Aircraft Hydraulic, Constant Displacement General Specification for |
| MIL-C-38404 Revision E:1992 | Couplings, Hose, Reattachable Screw-on (S/S by SAE-AS38404) |
| MIL-STD-1561 Revision B:1984 | PROVISIONING PROCEDURES, UNIFORM DOD (NO S/S DOCUMENT) |
| MIL-T-81259 Revision B:1991 | Tie-downs, Airframe Design, Requirements for (S/S by MIL-STD-81259) |
| MIL-M-85522 Revision A:1991 | MONITOR, OXYGEN CRU-91/A |
| MIL V 87223 : 0 | VALVE, PRESSURE, ANTI-G SUIT, MXU-804/A AND MXU-805/A |
| MIL-HDBK-400 Base Document:1985 | Criteria for Preparation of Gear and Spline Engineering Drawings |
| MIL-STD-1261 Revision C:1988 | Arc Welding Procedures for Constructional Steels (Refer to Notice 7 for Additional Information) |
| MIL-S-18471 Revision G:1983 | System, Aircrew Automated Escape, Ejection Seat Type, General Specification For |
| MIL-STD-1345 Revision B:1981 | TEST REQUIREMENTS DOCUMENT, PREPARATION OF (NO S/S DOCUMENT) |
| MIL-STD-275 Revision E:1984 | PRINTED WIRING FOR ELECTRONIC EQUIPMENT (REFER TO IPC-D275 OR IPC-2221) |
| MIL-STD-361-3 Base Document:1992 | MANUALS, TECHNICAL: REQUIREMENTS FOR GRAPHICS (S/S BY MIL-STD-40051) |
| MIL I 85581 : 0 | INTERVALOMETER, ROCKET LAUNCHER, REUSABLE |
| MIL A 87221 : 0 | AIRCRAFT STRUCTURES, GENERAL SPECIFICATION FOR REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503 |
| MIL-STD-483 Revision A:1985 | CONFIGURATION MANAGEMENT PRACTICES FOR SYSTEMS, EQUIPMENT, MUNITIONS, AND COMPUTER PROGRAMS (S/S BY MIL-STD-973) |
| MIL-I-85832 Base Document:1989 | INTERCOM, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE SET |
| MIL-H-85042 Revision A:1983 | Hooks, Bomb Rack, General Specification for |
| MIL D 83532 : A (3) SUPP 1 | DELAY LINES, ACTIVE |
| MIL BULL 103 : AC NOTICE 1 | LIST OF STANDARD MICROCIRCUIT DRAWINGS |
| MIL-C-5584 Revision D:1988 | Container, Shipping and Storage, Metal Reusable (No S/S Document) |
| MIL-C-83864 Revision A:1982 | Container, Inner, Survival Kit (No S/S Document) |
| DOD-STD-863 Revision B:1979 | WIRING DATA AND SYSTEM SCHEMATIC DIAGRAMS PREPARATION OF |
| MIL-G-85468 Base Document:1981 | GENERATOR CONTROL INDICATOR SG-118/AST-4(V) |
| MIL-E-24743 Base Document:1991 | Enclosure, Common Electronic Equipment, General Specification for (No S/S Document) |
| MIL M 63029 : C | MANUAL, TECHNICAL, REQUIREMENTS FOR OPERATOR S MANUALS AND CHECKLISTS FOR AIRCRAFT |
| IPC 2588 : 2007 | SECTIONAL REQUIREMENTS FOR IMPLEMENTATION OF PART LIST PRODUCT DATA DESCRIPTION |
| SAE AS7997 | Motors, Aircraft Hydraulic, Constant Displacement General Specification For |
| IEC PAS 61182-12:2014 | Generic requirements for printed board assembly products manufacturing description data and transfer methodology |
| MIL-C-70725 Revision A:1993 | Cartridge, 5.56MM, M862 Short Range Training Ammunition Performance Specification for |
| MIL-I-85889 Base Document:1988 | IGNITER, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL-STD-490 Revision A:1985 | SpecificationPractices (S/S by MIL-STD-961) |
| MIL-D-38386 Revision E:1989 | Duct Assembly, Ground, Conditioned Air, Insulated, Flexible (S/S by SAE-AS38386) |
| MIL-HDBK-339 Base Document:1984 | Custom Large Scale Integrated Circuit Development and Acquisition for Space |
| IPC 2583 : 2007 | SECTIONAL REQUIREMENTS FOR IMPLEMENTATION OF DESIGN CHARACTERISTICS FOR MANUFACTURING DATA DESCRIPTION |
| MIL-STD-361-9 Base Document:1992 | MANUALS, TECHNICAL: TROUBLESHOOTING PROCEDURES (S/S BY MIL-STD-40051) |
| MIL-A-25915 Revision A:1980 | Accelerometer, Aircraft, Pilot\'s Warning, Type MA-2 (No S/S Document) |
| MIL-S-5944 Revision C:1990 | SLINGS, AIRCRAFT, GENERAL SPECIFICATION FOR (S/S BY SAE-AS5944) |
| MIL-B-87167 Base Document:1985 | BELT, AIRCRAFT SAFETY, HBU-12/A |
| MIL-F-13926 Revision B:1984 | Fire Control Materiel, Manufacture and Inspection, General Specification for |
| MIL M 63045 : A | MANUAL, TECHNICAL, PREPARATION OF DEPOT MANUALS FOR DEPOT TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT |
| MIL-F-27656 Revision C:1987 | Filter Unit, Fluid, Pressure, MXU-408/M, Absolute, 5 Micron, Hydraulic |
| MIL-C-27718 Revision D:1984 | Crane, Hydraulic, Truck Mounted, A/S32A-16 16,500 Pound Crane Capacity, 6X4, DED (No S/S Document) |
| MIL-A-83136 Revision A:1990 | Arresting Hook Installation, Runway Arresting System, Aircraft, Emergency (No S/S Document) |
| SAE AS85352 | Inflator Assembly and Gage Elements, Pneumatic Pressure, Remote Control, Direct Reading |
| MIL-S-85508 Base Document:1981 | Spectacles, Aviator\'s, Neodymium Laser Protective, EDU-1/P (with case) |
| MIL-T-47500 Base Document:1989 | Technical Data Package, General Specification for (S/S by MIL-STD-31000) |
| MIL-STD-2118 Base Document:1984 | Flexible and Rigid Flex Printed Wiring for Electronic Equipment Design Requirements for (S/S by IPC2221 and IPC2223) |
| MIL M 63002 : F | MANUAL, TECHNICAL, REQUIREMENTS FOR PREPARATION OF MODIFICATION WORK ORDERS |
| MIL-STD-805 Revision B:1987 | TOWING FITTING AND PROVISIONS FOR FIXED WING AIRCRAFT, DESIGN, REQUIREMENTS FOR |
| MIL I 26359 : B | INDICATOR, ATTITUDE, REMOTE ARU-4/A |
| MIL-P-83126 Revision A:1980 | PROPULSION SYSTEMS, AIRCREW ESCAPE, DESIGN SPECIFICATION FOR |
| MIL-D-9898 Revision C:1986 | Drawing, Tube Bend |
| MIL-STD-1174 Revision B:1979 | Associated Lists for Arradcom Engineering Drawings (S/S by DOD-STD-100 and ASME-Y14.34) |
| MIL E 21981B:1986 | ELECTRONICS EQUIPMENT, NOMENCLATURE, SERIAL NUMBERS AND IDENTIFICATION PLATES: REQUIREMENTS FOR |
| MIL V 9050 : E (1) | VALVE, OXYGEN, PRESSURE RELIEF, AIRCRAFT |
| MIL-HDBK-263 Revision B:1994 | Electrostatic Discharge Control Handbook for Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices) (Metric) (S/S by ESD TR20.20) |
| MIL C 85052 : A | CLAMP LOOP, CUSHION, GENERAL SPECIFICATION FOR |
| MIL-C-11218 Revision E:1988 | Conveyors, Roller and Wheel, Gravity and Conveyor Supports |
| MIL-STD-2078 Base Document:1981 | REQUIREMENT FOR PREPARATION OF SUPPORT EQUIPMENT DEPOT LEVEL REWORK STANDARDS (NO S/S DOCUMENT) |
| MIL V 87255 : 0 | VALVE, PRESSURE, ANTI-G SUIT, HIGH FLOW |
| MIL-P-85573 Base Document:1983 | POWER UNIT AIRCRAFT AUXILIARY, GAS TURBINE, GENERAL SPECIFICATION FOR |
| SAE MA2100 | Hose Assemblies, Metal Medium Pressure, High Temperature, Metric |
| IEC 61182-2-2:2012 | Printed board assembly products - Manufacturing description data and transfer methodology - Part 2-2: Sectional requirements for implementation of printed board fabrication data description |
| BS IEC 61182-2:2006 | Printed board assembly products. Manufacturing description data and transfer methodology Generic requirements |
| MIL-D-19326 Revision H:1990 | Design and Installation of Liquid Oxygen Systems in Aircraft, General Specification for |
| MIL A 5503 : E | ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
| MIL-B-81934 Revision B:1991 | Bearings, Sleeve, Plain and Flanged, Self-Lubricating, General Specification for (S/S by SAE-AS81934) |
| MIL M 63003 : A | MANUALS, TECHNICAL: BATTLEFIELD DAMAGE ASSESSMENT AND REPAIR, PREPARATION OF |
| MIL-S-29594 Base Document:1992 | Spectacles, Aviator\'s, Seven Wavelength Laser Eye Protective |
| MIL-A-26360 Revision B:1982 | Amplifier, Electrical Control ASU-3/A (No S/S Document) |
| MIL-A-27330 Revision B:1987 | Accelerometer, Electrical, Linear TRU-3/A |
| MIL-F-85720 Base Document:1985 | FITTING, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM, SEAL, GENERAL SPECIFICATION FOR |
| MIL-STD-2119 Revision A:1990 | Design Requirements for Printed-Wiring Electrical Backplane Assemblies |
| MIL-S-3443 Revision G:1993 | Shotgun, 12 Gage, Riot-Type |
| MIL-P-11268 Revision L:1983 | PARTS, MATERIALS, AND PROCESSES USED IN ELECTRONIC EQUIPMENT (NO S/S DOCUMENT) |
| SAE AS1960 | Coupling Assembly, V-Band, Sheet Metal Flange, Pneumatic Tube |
| SAE MA2007A | Hose Assembly, Tetrafluoroethylene, Lightweight, 204 °C, 21 000 kPa Hydraulic, Metric |
| MIL-I-25941 Revision D:1986 | Indicator, Turn and Slip, 2- Inch Size, Integrally Lighted |
| MIL-C-87970 Base Document:1982 | Control Set, Gyroscope, Attitude Heading AN/ASN-129 (No S/S Document) |
| MIL-G-25591 Revision E:1981 | Gyroscope, Rate, Switching, Type MC-1 |
| MIL T 25435 : B | TRANSMITTER, PRESSURE, AIRCRAFT, VARIABLE RELUCTANCE TYPE, GENERAL SPECIFICATION FOR |
| MIL-L-6273 Revision D:1983 | Light, Navigational, Beacon, Obstacle or Code, Type G-1 (No S/S Document) |
| MIL D 28000 : A | DIGITAL REPRESENTATION FOR COMMUNICATION OF PRODUCT DATA: IGES APPLICATION SUBSETS |
| EIA CMB5 : 2014 STABILIZED | CONFIGURATION MANAGEMENT REQUIREMENTS FOR SUBCONTRACTORS/VENDORS |
| MIL-T-81490 Revision A:1991 | TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE |
| MIL-I-25437 Revision B:1984 | Indicator, Aircraft, Pressure, Voltage Ratio Type, General Specification for |
| MIL-B-83183 Revision B:1987 | Barrier Aircraft Arresting |
| MIL C 25666 : E (1) | CONVERTER, LIQUID OXYGEN, CAPACITANCE TYPE GAGING, GENERAL SPECIFICATION FOR |
| MIL-V-85830 Base Document:1989 | VENTILATOR, TACTICAL, HELICOPTER AIRCREWMEN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE |
| MIL-I-26299 Revision G:1990 | Indicator, Rate of Flow, 0-5,000 PPH, Integrally Lighted (No S/S Document) |
| MIL V 25961 : F | VALVE, FILL-BUILDUP-VENT, LIQUID OXYGEN CONVERTER, CRU-5O/A |
| EIA CMB 7-2 : 2014 STABILIZED | GUIDELINE FOR TRANSITIONING CONFIGURATION MANAGEMENT TO AN AUTOMATED ENVIRONMENT |
| MIL L 7830 : D | LIGHT ASSEMBLY, MARKER, AIRCRAFT OBSTRUCTION |
| I.S. EN 61182-2-2:2012 | PRINTED BOARD ASSEMBLY PRODUCTS - MANUFACTURING DESCRIPTION DATA AND TRANSFER METHODOLOGY - PART 2-2: SECTIONAL REQUIREMENTS FOR IMPLEMENTATION OF PRINTED BOARD FABRICATION DATA DESCRIPTION (IEC 61182-2-2:2012 (EQV)) |
| MIL-D-23140 Revision D:1992 | Drawings, Installation Control, for Electronic Equipment |
| MIL-V-29591 Base Document:1992 | Visor Assembly, Aviator\'s Seven Wavelength Laser Protective, General Specification for |
| GEIA CMB6-4:1991(S2014) | CONFIGURATION CONTROL |
| IPC 2582 : 2007 | SECTIONAL REQUIREMENTS FOR IMPLEMENTATION OF ADMINISTRATIVE METHODS FOR MANUFACTURING DATA DESCRIPTION |
| MIL-P-85576 Revision B:1987 | POWER SUPPLY PP-2581C/A |
| SAE AS4388 | Hose Assembly PTFE Heavy Duty, -65 To 400 °F (-55 To 204 °C) 8000 psi (56 000 kPa) Hydraulic and Pneumatic |
| SAE MA2079 | Hose Assembly, Convoluted Polytetrafluoroethylene, High Temperature, Medium Pressure, Aircraft, Metric |
| ANSI Y14.5 : 1973 | DIMENSIONING AND TOLERANCING FOR ENGINEERING DRAWINGS |
| ASTM E 380 : 1993 | Standard Practice for Use of the Internation System of Units (SI) (the Modernized Metric System) (Withdrawn 1997) |
| AWS A2.4 : 2012 | STANDARD SYMBOLS FOR WELDING, BRAZING, AND NONDESTRUCTIVE EXAMINATION |
| L-P-519 Revision C:1977 | Plastic Sheet: Tracing, Glazed and Matter Finish |
| MIL D 5480 : F | DATA, ENGINEERING AND TECHNICAL REPRODUCTION REQUIREMENTS FOR |
| MIL-M-38761 Revision B:1977 | Microfilming and Photographing of Engineering/Technical Data and Related Documents, Requirements for |
| IEEE 260-1978 | IEEE Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units) |
| MIL-STD-1306 Revision A:1972 | FLUERICS TERMINOLGY AND SYMBOLS (NO S/S DOCUMENT) |
| MIL-STD-275 Revision E:1984 | PRINTED WIRING FOR ELECTRONIC EQUIPMENT (REFER TO IPC-D275 OR IPC-2221) |
| IEEE/ANSI Y32.9-1972 | American National Standard Graphic Symbols for Electrical Wiring and Layout Diagrams Used in Architecture and Building Construction |
| MIL-STD-196 Revision F:2013 | Joint Electronics Type Designation Automated System |
| UU-P-221 Revision B:1972 | Paper, Direct Positive Sensitized (Diazotype) (No S/S Document) |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| MIL-STD-172 Revision C:1982 | Color Code for Containers of Liquid Propellants (No S/S Document) |
| IEEE 315 : 1975 | GRAPHIC SYMBOLS FOR ELECTRICAL AND ELECTRONICS DIAGRAMS (INCLUDING REFERENCE DESIGNATION LETTERS) |
| MIL-STD-34 Base Document:1960 | PREPARATION OF DRAWING FOR OPTICAL ELEMENTS AND OPTICAL SYSTEMS, GENERAL REQUIREMENTS FOR (S/S BY ASME-Y14.18) |
| AWS A3.0 : 0 | STANDARD WELDING TERMS AND DEFINITIONS - INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
| MIL-STD-143 Revision B:1969 | STANDARDS & SPECIFICATIONS, ORDER OF PRECEDENCE FOR THE SELECTION OF (S/S BY MIL-STD-970) |
| MIL-STD-27 Base Document:1953 | Designations for Electric Power Switchgear Devices and Industrial Control Devices (S/S by ANSI C37 .20) |
| MIL-P-55010 Revision A:1965 | PLASTIC SHEET, POLYETHYLENE TEREPHTHALATE (S/S BY A-A-56021) |
| MIL-STD-29 Revision A:1962 | SPRING, MECHANICAL, DRAWING REQUIREMENTS FOR (S/S BY ASME-Y14.13M) |
| MIL-STD-12 Revision D:1981 | ABBREVIATIONS FOR USE ON DRAWINGS, AND IN SPECIFICATIONS, STANDARDS AND TECHNICAL DOCUMENTS (S/S BY ASME-Y14.38M) |
| DOD-D-1000 Revision B:1977 | Drawings, Engineering and Associated Lists (S/S by MIL-DTL-31000) |
| SAE AS1290B | Graphic Symbols for Aircraft Hydraulic and Pneumatic Systems |
| DOD STD 1476 : A | METRIC SYSTEM, APPLICATION IN NEW DESIGN |
| UU-P-561 Revision H:1972 | PAPER, TRACING (S/S BY A-A-2946) |
| MIL-STD-14 Revision A:1954 | ARCHITECTURAL SYMBOLS |
| IPC D 350 : 0 | PRINTED BOARD DESCRIPTION IN DIGITAL FORM |
| ANSI INCITS 5 : 1970 | FLOWCHART SYMBOLS AND THEIR USAGE IN INFORMATION PROCESSING |
| CCC C 531 : E | CLOTH, TRACING |
| ASME Y14.1 : 2012 | DECIMAL INCH DRAWING SHEET SIZE AND FORMAT - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| MIL-STD-25 Revision B:1984 | Ship Structural Symbols for Use on Ship Drawings |
| ANSI Y14.26.3 : 1975 | DICTIONARY OF TERMS FOR COMPUTER AIDED PREPARATION OF PRODUCT DEFINITION DATA (INCLUDING ENGINEERING DRAWINGS) |
| MIL-STD-15-2 Base Document:1961 | ELECTRICAL WIRING EQUIPMENT SYMBOLS FOR SHIPS PLANS PART 2 (NO S/S DOCUMENT) |
| MIL STD 1495 : LATEST | |
| MIL-STD-171 Revision F:2011 | Finishing of Metal and Wood Surfaces |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.
Are you sure?
Logging out.