DIN ISO 5725-6:2002-08
Current
The latest, up-to-date edition.
ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES
Hardcopy , PDF
German
01-01-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Ermittlung von Grenzen
4.1 Grenzen für Wiederholpräzision und
Vergleichpräzision
4.2 Auf mehr als zwei Werten beruhende
Vergleiche
5 Verfahren zur Prüfung der Annehmbarkeit von
Ermittlungsergebnissen und zur Ermittlung des
anzugebenden Schlussergebnisses
5.1 Allgemeines
5.2 Verfahren zur Prüfung der Annehmbarkeit von
Ermittlungsergebnissen, gewonnen unter
Wiederholbedingungen
5.3 Verfahren zur Prüfung der Annehmbarkeit von
Ermittlungsergebnissen, gewonnen unter
Wiederholbedingungen wie auch unter
Vergleichbedingungen
6 Verfahren zur Prüfung der Stabilität von
Ermittlungsergebnissen eines Labors
6.1 Zusammenhänge
6.2 Verfahren zur Stabilitätsprüfung
7 Anwendung von Wiederhol- und
Vergleichstandardabweichungen bei der Beurteilung
von Labors
7.1 Beurteilungsverfahren
7.2 Beurteilung der Anwendung eines Messverfahrens
durch ein vorher nicht beurteiltes Labor
7.3 Fortgesetzte Beurteilung von vorher zugelassenen
Labors
8 Vergleich alternativer Messverfahren
8.1 Herkunft alternativer Messverfahren
8.2 Zweck des Vergleichs von Messverfahren
8.3 Verfahren B als Anwärter für ein alternatives
vereinheitlichtes Messverfahren
("Vereinheitlichungsversuch" nicht festgelegt)
8.4 Ringversuch
8.5 Messverfahren B ist ein Anwärter für ein
Routine-Messverfahren
Anhang A (normativ) Symbole und Abkürzungen in ISO 5725
This standard is included in DIN Handbook 355.
| DocumentType |
Standard
|
| Pages |
91
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| ISO 5725-6:1994 | Identical |
| DIN HDBK 355 : 1ED 2004 | |
| DIN EN 14185-2:2006-08 | Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column |
| DIN EN 13040:2008-01 | Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| DIN EN ISO 11609:2016-07 (Draft) | DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:2017) |
| DIN EN 12506:2003-09 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CI[-], CO, CR, CR(VI), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN |
| DIN EN 15062:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| DIN EN 14789:2017-05 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| DIN EN 16487:2015-02 | ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION |
| DIN ISO 362-2:2010-05 | Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category (ISO 362-2:2009) |
| DIN ISO 19730:2009-07 | SOIL QUALITY - EXTRACTION OF TRACE ELEMENTS FROM SOIL USING AMMONIUM NITRATE SOLUTION |
| DIN EN 14789:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| DIN EN ISO 20483:2014-03 | CEREALS AND PULSES - DETERMINATION OF THE NITROGEN CONTENT AND CALCULATION OF THE CRUDE PROTEIN CONTENT - KJELDAHL METHOD (ISO 20483:2013) |
| DIN EN 13370:2003-09 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, CN[-] EASILY LIBERATABLE, F[-] |
| DIN EN ISO 7235:2010-01 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| DIN ISO 20481:2011-01 | Coffee and coffee products - Determination of the caffeine content using high performance liquid chromatography (HPLC) - Reference method (ISO 20481:2008) |
| DIN EN 16192:2012-02 | Characterization of waste - Analysis of eluates |
| DIN EN 15428:2007-11 | Soil improvers and growing media - Determination of particle size distribution |
| DIN EN 15781:2009-11 | Animal feeding stuffs - Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation |
| DIN ISO 16592:2015-12 | MICROBEAM ANALYSIS - ELECTRON PROBE MICROANALYSIS - GUIDELINES FOR DETERMINING THE CARBON CONTENT OF STEELS USING A CALIBRATION CURVE METHOD (ISO 16592:2012) |
| DIN EN 13037:2012-01 | Soil improvers and growing media - Determination of pH |
| DIN EN 13041:2012-01 | Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space |
| DIN EN 13039:2012-01 | Soil improvers and growing media - Determination of organic matter content and ash |
| DIN EN 14792:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
| DIN EN 14791:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
| DIN EN ISO 2171:2010-08 | Cereals, pulses and by-products - Determination of ash yield by incineration (ISO 2171:2007) |
| DIN EN ISO 11876:2010-12 | Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010) |
| DIN EN ISO 15193:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| DIN EN 15058:2006-09 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
| DIN EN 13038:2012-01 | Soil improvers and growing media - Determination of electrical conductivity |
| DIN EN ISO 9614-1:2009-11 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| DIN EN 14790:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| DIN EN 14123:2008-03 | FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1] AND THE SUM OF AFLATOXIN B[1], B[2], G[1] AND G[2] IN HAZELNUTS, PEANUTS, PISTACHIOS, FIGS, AND PAPRIKA POWDER - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH POST-COLUMN DERIVATISATION AND IMMUNOAFFINITY COLUMN CLEANUP |
| DIN EN 14790:2017-05 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| DIN 13303-2:1982-11 | STOCHASTICS - MATHEMATICAL STATISTICS - CONCEPTS, SIGNS AND SYMBOLS |
| DIN 55350-22:1987-02 | CONCEPTS OF QUALITY ASSURANCE AND STATISTICS - CONCEPTS OF STATISTICS - SPECIAL PROBABILITY DISTRIBUTIONS |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO/IEC Guide 25:1990 | General requirements for the competence of calibration and testing laboratories |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| DIN 13303-1:1982-05 | STOCHASTICS; PROBABILITY THEORY, COMMON FUNDAMENTAL CONCEPTS OF MATHEMATICAL AND OF DESCRIPTIVE STATISTICS; CONCEPTS, SIGNS AND SYMBOLS |
| DIN 55350-24:1982-11 | CONCEPTS OF QUALITY ASSURANCE AND STATISTICS; CONCEPTS OF STATISTICS; ANALYTICAL STATISTICS |
| DIN 55350-23:1983-04 | CONCEPTS OF QUALITY ASSURANCE AND STATISTICS; CONCEPTS OF STATISTICS; DESCRIPTIVE STATISTICS |
| DIN EN ISO 9000:2015-11 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| DIN 55350-21:1982-05 | CONCEPTS OF QUALITY ASSURANCE AND STATISTICS; CONCEPTS OF STATISTICS; RANDOM VARIABLES AND PROBABILITY DISTRIBUTIONS |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.