DIN ISO 17359:2011-09
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES
Available format(s)
Hardcopy , PDF
Superseded date
07-03-2021
Superseded by
Language(s)
English, German
Published date
01-01-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Overview of condition monitoring procedure
5 Equipment audit
6 Reliability and criticality audit
7 Measurement method
8 Data collection and analysis
9 Determine maintenance action
10 Review
11 Training
Annex A (informative) Examples of condition monitoring
parameters
Annex B (informative) Matching fault(s) to measured
parameter(s) or technique(s)
Annex C (informative) Typical information to be recorded
when monitoring
Bibliography
Provides guidelines for the general procedures to be considered when setting up a condition monitoring programme for machines and includes references to associated standards required in this process.
| DevelopmentNote |
DRAFT 2017 issued in June 2017. (06/2017)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO 17359:2011 | Identical |
| DIN ISO 18129:2016-01 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - APPROACHES FOR PERFORMANCE DIAGNOSIS (ISO 18129:2015) |
| DIN ISO 13373-3:2015-12 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 3: GUIDELINES FOR VIBRATION DIAGNOSIS (ISO 13373-3:2015) |
| VDI 4550 Blatt 1:2017-04 | Vibration analysis - Procedures and presentation of results - Terminology and basic principles |
| VDI 2878 Blatt 1:2012-05 | Application of thermography to maintenance diagnostics - General requirements and information for decision makers and managers |
| DIN ISO 18436-2:2014-11 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 2: VIBRATION CONDITION MONITORING AND DIAGNOSTICS (ISO 18436-2:2014) |
| DIN ISO 18436-3:2013-05 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 3: REQUIREMENTS FOR TRAINING BODIES AND THE TRAINING PROCESS (ISO 18436-3:2012) |
| ISO 9906:2012 | Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| DIN ISO 7919-4:2010-06 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS (ISO 7919-4:2009 + AMD.1:2017) |
| ISO 10816-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings |
| DIN ISO 18436-1:2013-05 | Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 1: Requirements for assessment bodies and the assessment process (ISO 18436-1:2012) |
| DIN ISO 6954:2001-06 | MECHANICAL VIBRATION - GUIDELINES FOR THE MEASUREMENT, REPORTING AND EVALUATION OF VIBRATION WITH REGARD TO HABITABILITY ON PASSENGER AND MERCHANT SHIPS |
| DIN ISO 10816-7:2009-08 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 7: ROTODYNAMIC PUMPS FOR INDUSTRIAL APPLICATIONS, INCLUDING MEASUREMENTS ON ROTATING SHAFTS |
| ISO 10055:1996 | Mechanical vibration — Vibration testing requirements for shipboard equipment and machinery components |
| DIN ISO 7919-5:2005-10 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 5: MACHINE SETS IN HYDRAULIC POWER GENERATING AND PUMPING PLANTS |
| ISO 7919-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings |
| DIN ISO 18436-3:2013-05 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 3: REQUIREMENTS FOR TRAINING BODIES AND THE TRAINING PROCESS (ISO 18436-3:2012) |
| ISO 14694:2003 | Industrial fans — Specifications for balance quality and vibration levels |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| IEC 60300-3-3:2017 | Dependability management - Part 3-3: Application guide - Life cycle costing |
| DIN ISO 7919-1:1997-08 | MECHANICAL VIBRATION OF NON-RECIPROCATING MACHINES - MEASUREMENTS ON ROTATING SHAFTS AND EVALUATION - PART 1: GENERAL GUIDELINES |
| ISO 13381-1:2015 | Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines |
| ISO 10816-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| ISO 8528-6:2005 | Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods |
| ISO 5151:2017 | Non-ducted air conditioners and heat pumps — Testing and rating for performance |
| ISO 7919-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| DIN EN ISO 9906:2013-03 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| ISO 8579-2:1993 | Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
| ISO 7919-1:1996 | Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines |
| DIN 1945-1:1980-11 | DISPLACEMENT COMPRESSOR; THERMODYNAMIC ACCEPTANCE AND PERFORMANCE TEST |
| IEC 61078:2016 | Reliability block diagrams |
| ISO 10816-5:2000 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 5: Machine sets in hydraulic power generating and pumping plants |
| DIN ISO 18436-2:2014-11 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 2: VIBRATION CONDITION MONITORING AND DIAGNOSTICS (ISO 18436-2:2014) |
| ISO 6954:2000 | Mechanical vibration Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships |
| ISO 5389:2005 | Turbocompressors — Performance test code |
| ISO 1217:2009 | Displacement compressors Acceptance tests |
| ISO 10816-6:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 6: Reciprocating machines with power ratings above 100 kW |
| ISO 13350:2015 | Fans — Performance testing of jet fans |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| ISO 14695:2003 | Industrial fans — Method of measurement of fan vibration |
| DIN EN ISO 5801:2011-11 | FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS (ISO 5801:2017) |
| ISO 7919-5:2005 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 5: Machine sets in hydraulic power generating and pumping plants |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| IEC 60300-3-2:2004 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| ISO 2314:2009 | Gas turbines — Acceptance tests |
| ISO 13372:2004 | Condition monitoring and diagnostics of machines Vocabulary |
| ISO 19499:2007 | Mechanical vibration Balancing Guidance on the use and application of balancing standards |
| IEC 60300-3-1:2003 | Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology |
| DIN 8957-4:1975-10 | AIR CONDITIONERS; TESTS FOR HEATING OPERATION OF THE REFRIGERATING SYSTEM/HEAT PUMP |
| DIN ISO 13373-2:2006-01 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 2: PROCESSING, ANALYSIS AND PRESENTATION OF VIBRATION DATA (ISO 13373-2:2016) |
| DIN ISO 7919-2:2010-06 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| ASME PTC46 : 2015 | PERFORMANCE TEST CODES - OVERALL PLANT PERFORMANCE |
| ISO 8528-9:2017 | Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations |
| DIN ISO 8528-9:1999-01 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 9: MEASUREMENT AND EVALUATION OF MECHANICAL VIBRATIONS |
| ISO 10816-1:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines |
| DIN ISO 7919-3:2009-08 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 3: COUPLED INDUSTRIAL MACHINES (ISO 7919-3:2009 + AMD.1:2017) |
| IEC 60300-3-11:2009 | Dependability management - Part 3-11: Application guide - Reliability centred maintenance |
| ISO 10816-7:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| ISO 8528-1:2005 | Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance |
| ISO 3046-1:2002 | Reciprocating internal combustion engines Performance Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods Additional requirements for engines for general use |
| ISO/IEC 2382-14:1997 | Information technology Vocabulary Part 14: Reliability, maintainability and availability |
| ISO 7919-3:2009 | Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines |
| ISO 3046-3:2006 | Reciprocating internal combustion engines Performance Part 3: Test measurements |
| ASME PTC22 : 2014 | GAS TURBINES |
| DIN EN ISO 13350:2016-02 | FANS - PERFORMANCE TESTING OF JET FANS (ISO 13350:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.