DIN IEC 60068-2-14:1987-06
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST N: CHANGE OF TEMPERATURE
01-08-2000
12-01-2013
Vorwort
Einleitung
Historischer Überblick zur Prüfgruppe N: Temperaturwechsel
Einführung,
1 Prüfung Na: Rascher Temperaturwechsel mit
festgelegter Überführungsdauer
1.1 Zweck
1.2 Allgemeine Beschreibung
1.3 Beschreibung der Prüfeinrichtung
1.4 Schärfegrade,
1.5 Anfangsmessungen
1.6 Beanspruchung
1.7 Nachbehandlung
1.8 Endmessungen
1.9 Angaben in der Einzelbestimmung
2 Prüfung Nb: Temperaturwechsel mit fest
gelegter Änderungsgeschwindigkeit
2.1 Zweck
2.2 Allgemeine Beschreibung
2.3 Beschreibung der Prüfeinrichtung
2.4 Schärfegrade
2.5 Anfangsmessungen
2.6 Beanspruchung
2.7 Nachbehandlung
2.8 Endmessungen
2.9 Angaben in der Einzelbestimmung
3 Prüfung Nc: Rascher Temperaturwechsel
(Zweibäderverfahren)
3.1 Zweck
3.2 Allgemeine Beschreibung
3.3 Beschreibung der Prüfeinrichtung
3.4 Schärfegrade
3.5 Anfangsmessungen
3.6 Beanspruchung
3.7 Nachbehandlung
3.8 Endmessungen
3.9 Angaben in der Einzelbestimmung
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| IEC 60068-2-14:2009 | Identical |
| HD 323.2.14 : 200S2 | Corresponds |
| DIN 44080:1983-10 | THERMISTORS - PTC, TECHNICAL TERMS AND TESTS |
| DIN EN 60868 : 1994 | FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS |
| VDE 0846-2 : 1994 | FLICKERMETER; FUNCTIONAL AND DESIGN SPECIFICATIONS |
| DIN EN 60068-2-50:2000-08 | ENVIRONMENTAL TESTING- PART 2: TESTS; TESTS Z/AFC: COMBINED COLD/VIBRATION (SINUSOIDAL) TESTS FOR BOTH HEAT-DISSIPATING AND NON-HEAT-DISSIPATING SPECIMENS |
| DIN EN 138000 : 1997 | GENERIC SPECIFICATION; FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) |
| DIN EN 175200:1996-11 | SECTIONAL SPECIFICATION - CIRCULAR CONNECTORS |
| DIN EN 133000 : 1997 | GENERIC SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION |
| DIN EN 60068-4:1996-10 | ENVIRONMENTAL TESTING - PART 4: INFORMATION FOR SPECIFICATION WRITERS - TEST SUMMARIES |
| VDE 0560-22 : 1997 | CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL |
| DIN 45671-1:1990-09 | MEASUREMENT OF EXPOSURE TO OCCUPATIONAL VIBRATION; VIBROMETERS; REQUIREMENTS AND TESTING |
| VDE 0560-6 : 1986 | CAPACITORS - CAPACITORS WITH NOMINAL POWERS UP TO 1,5 KVAR FOR INSTALLATIONS WITH DISCHARGE LAMPS, IN PARTICULAR WITH FLUORESCENT LAMPS |
| DIN 45175-3:1987-05 | QUARTZ CRYSTAL CONTROLLED OSCILLATORS; CHARACTERISTICS OF QUARTZ CRYSTAL CONTROLLED OSCILLATORS; CHECK LIST |
| DIN EN 61243-2 : 2001 AMD 2 2003 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| DIN EN 61270-1 : 1997 | CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL |
| DIN EN 137000 : 1998-03 | GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS |
| VDE 0884 : 1987 | OPTOCOUPLER FOR PROTECTIVE SEPARATION AGAINST ELECTRIC SHOCK, REQUIREMENTS, TESTS |
| DIN EN 60938-1 : 2008 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| VDE 0660-209 : 1988 | SWITCHGEAR AND CONTROLGEAR; LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR; ADDITIONAL REQUIREMENTS FOR PROXIMITY POSITION SWITCHES FOR SAFETY FUNCTIONS |
| VDE 0557-6 : 2001 | LOW-VOLTAGE POWER SUPPLIES, DC OUTPUT - PART 6: REQUIREMENTS FOR LOW-VOLTAGE POWER SUPPLIES OF ASSESSED PERFORMANCE |
| DIN IEC 60679-2:1997-09 | QUARTZ CRYSTAL CONTROLLED OSCILLATORS - PART 2: GUIDE TO THE USE OF QUARTZ CRYSTAL CONTROLLED OSCILLATORS |
| DIN EN 60068-2-51:2000-08 | ENVIRONMENTAL TESTING - PART 2: TESTS; TESTS Z/BFC: COMBINED DRY HEAT/VIBRATION (SINUSOIDAL) TESTS FOR BOTH HEAT-DISSIPATING AND NON-HEAT-DISSIPATING SPECIMENS |
| DIN EN 165000-1:1996-11 | FILM AND HYBRID INTEGRATED CIRCUITS - PART 1: GENERIC SPECIFICATION - CAPABILITY APPROVAL PROCEDURE |
| DIN EN 144000:1995-09 | GENERIC SPECIFICATION: DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT THERMISTORS TYPICALLY MADE FROM MODIFIED FERRO-ELECTRIC MATERIALS |
| DIN EN 60749:2002-09 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS |
| VDE 0682-412 : 2001 AMD 1 2003 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| VDE V 0122-2-2 : 2000 | CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 2-2: A.C. CHARGING STATION |
| DIN VDE 0560-6 : 1986 | CAPACITORS - CAPACITORS WITH NOMINAL POWERS UP TO 1,5 KVAR FOR INSTALLATIONS WITH DISCHARGE LAMPS, IN PARTICULAR WITH FLUORESCENT LAMPS |
| DIN VDE 0560-8 : 1988 | CAPACITORS - MOTOR CAPACITORS |
| DIN 45174-2:1987-05 | QUARTZ CRYSTAL CONTROLLED OSCILLATORS; TEST CONDITIONS AND METHODS |
| VDE 0115-430 : 2000 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS |
| VDA 402 : 2011 | |
| VDE 0560-800 : 1998 | GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS |
| DIN VDE 0884 : 1987 | OPTOCOUPLER FOR PROTECTIVE SEPARATION AGAINST ELECTRIC SHOCK; REQUIREMENTS, TEST |
| DIN VDE 0660-209 : 1988 | SWITCH GEAR AND CONTROL GEAR; LOW VOLTAGE SWITCH GEAR AND CONTROL GEAR; ADDITIONAL REQUIREMENTS FOR PROXIMITY POSITION SWITCHES FOR SAFETY FUNCTIONS |
| DIN EN 61881 : 2000 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS |
| DIN VDE 0110-1 : 1997 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
| DIN IEC 60068-2-1:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TESTS A: COLD |
| DIN IEC 60068-2-33:1980-04 | BASIC ENVIRONMENTAL TESTING PROCEDURES; PART 2: TESTS, GUIDANCE ON CHANGE OF TEMPERATURE TESTS |
| DIN IEC 60068-2-2:1980-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TESTS B: DRY HEAT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.