DIN EN ISO 7093-1:2000-11
Current
The latest, up-to-date edition.
PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A
Hardcopy , PDF
English, German
01-11-2000
Important note : All end users must be registered with an Account prior to user licenses being assigned.Kein Inhaltsverzeichnis in der Norm vorhanden.
Defines the characteristics of large-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 64 mm inclusive. Washers conforming to this part of ISO 7093 are intended for use where soft material pieces are to be clamped, or where there are large clearance holes in the workpiece. In the latter case, the suitability of the washer thickness should be checked.
| DevelopmentNote |
Together with DIN EN ISO 7093-2; supersedes DIN 9021 (11/2000)
|
| DocumentType |
Standard
|
| Pages |
8
|
| ProductNote |
Together with DIN EN ISO 7093-2; supersedes DIN 9021 (AE 11/2000)
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 7093-1 : 2000 | Identical |
| SN EN ISO 7093-1 : 2000 | Identical |
| UNE-EN ISO 7093-1:2000 | Identical |
| NS EN ISO 7093-1 : 1ED 2000 | Identical |
| NEN EN ISO 7093-1 : 2000 | Identical |
| EN ISO 7093-1:2000 | Identical |
| ISO 7093-1:2000 | Identical |
| UNI EN ISO 7093-1 : 2001 | Identical |
| NBN EN ISO 7093-1 : 2000 | Identical |
| I.S. EN ISO 7093-1:2000 | Identical |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| DIN EN ISO 6507-1:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
| ISO 4759-3:2016 | Tolerances for fasteners Part 3: Washers for bolts, screws and nuts Product grades A, C and F |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| DIN EN ISO 4759-3:2015-01 (Draft) | TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F (ISO 4759-3:2016) |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| DIN EN ISO 3269:2000-11 | FASTENERS - ACCEPTANCE INSPECTION |
| EN ISO 4759-3:2016 | Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) |
| DIN EN ISO 3506-1:2010-04 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| ISO 887:2000 | Plain washers for metric bolts, screws and nuts for general purposes General plan |
| DIN EN ISO 10683:2016-07 (Draft) | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| ISO 3269:2000 | Fasteners Acceptance inspection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.