DIN EN ISO 6145-1:2008-11
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION
Hardcopy , PDF
15-04-2020
English
01-01-2008
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Kalibrierverfahren
4.1 Allgemeines
4.2 Beschreibung der primären bzw. potentiell
primären Messgeräte
4.3 Messungen am hergestellten Gasgemisch
5 Techniken für die Gasgemischherstellung, die mit den
in Abschnitt 4 beschriebenen Verfahren kalibriert werden
5.1 Allgemeines
5.2 Volumetrische Pumpen
5.3 Kontinuierliches Spritzen-Injektionsverfahren
5.4 Kapillardosierer
5.5 Kritische Düsen
5.6 Thermische Massendurchflussregler
5.7 Diffusion
5.8 Sättigungsverfahren
5.9 Permeationsverfahren
Anhang A (normativ) - Volumenmessung durch Wägung der
Wasserfüllmenge
Anhang B (informativ) - Beschreibung der gegen primäre
Geräte kalibrierbedürftigen
sekundären Strömungsmessgeräte
Literaturhinweise
Defines the calibration methods involved in the preparation of gas mixtures by dynamic volumetric techniques. It also gives a brief presentation of a non-exhaustive list of examples of dynamic volumetric techniques, which are described in more detail in other parts of ISO 6145.
DocumentType |
Standard
|
Pages |
41
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
ISO 6145-1:2003 | Identical |
EN ISO 6145-1:2008 | Identical |
DIN EN ISO 6145-9:2011-03 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009) |
VDI 2100 Blatt 3:2011-10 | Determination of gaseous compounds in ambient air - Determination of indoor air pollutants - Gas chromatographic determination of organic compounds - Active sampling by accumulation on adsorbents - Thermal desorption |
DIN EN ISO 6145-4:2008-11 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004) |
DIN EN ISO 17621:2015-12 | WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015) |
DIN EN ISO 6145-5:2011-03 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009) |
DIN EN 15483:2009-02 | AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY |
DIN EN ISO 6145-8:2008-11 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 8: DIFFUSION METHOD |
DIN EN ISO 6145-11:2008-11 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 11: ELECTROCHEMICAL GENERATION |
DIN EN ISO 6145-10:2008-11 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 10: PERMEATION METHOD |
ISO/IEC Guide 98:1993 | Guide to the expression of uncertainty in measurement (GUM) |
ISO 6145-7:2009 | Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 7: Thermal mass-flow controllers |
ISO 6143:2001 | Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures |
ISO 6142:2001 | Gas analysis Preparation of calibration gas mixtures Gravimetric method |
ISO 6145-10:2002 | Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method |
ISO 6145-2:2014 | Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 2: Piston pumps |
ISO 6145-5:2009 | Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 5: Capillary calibration devices |
ISO 6145-4:2004 | Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 4: Continuous syringe injection method |
ISO 7504:2015 | Gas analysis Vocabulary |
ISO 6145-9:2009 | Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method |
ISO 6145-6:2017 | Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 6: Critical flow orifices |
ISO 6145-8:2005 | Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 8: Diffusion method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.