DIN EN ISO 4064-2:2017-10
Current
Current
The latest, up-to-date edition.
WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
Amended by
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
National Annex NA (informative) - Bibliography
European foreword
Annex ZA (informative) - Relationship between this European
Standard and the essential requirements
of Directive 2014/32/EU aimed to be covered
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Reference conditions
5 Symbols, units and equations
6 External examination
7 Performance tests for all water meters
8 Performance tests related to influence factors and
disturbances
9 Test program for type evaluation
10 Tests for initial verification
11 Presentation of results
Annex A (normative) - Type examination and testing of
checking facilities of electronic devices
Annex B (normative) - Calculating the relative error (of
indication) of a water meter
Annex C (normative) - Installation requirements for flow
disturbance tests
Annex D (normative) - Type evaluation of a family of water
meters
Annex E (informative) - Examples of methods and components
used for testing concentric water meters
Annex F (informative) - Determining the density of water
Annex G (informative) - Maximum uncertainties in the
measurement of influence factors and disturbances
Annex H (informative) - Pressure loss test pressure
tappings, hole and slot details
Annex I (normative) - Flow disturbers
Bibliography
Describe to the type evaluation and initial verification testing of water meters for cold potable water and hot water as defined in ISO 4064-1:2014¦OIML R 49-1:2013.
| DevelopmentNote |
Supersedes DIN EN 14154-3 E. (11/2014)
|
| DocumentType |
Standard
|
| Pages |
116
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 4064-2:2014 | Identical |
| EN ISO 4064-2:2017 | Identical |
| DIN EN ISO 4064-1:2017-10 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014) |
| DIN EN 60068-2-2 : 1995 | ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT |
| DIN EN 61000-4-11 : 2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS |
| ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
| VDE 0468-2-1 : 2008 | ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 61000-4-1:2006 | Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| IEC 60068-3-1:2011 | Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| VDE 0847-4-6 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| DIN EN 60068-2-64 : 1995 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| DIN EN 61000-6-1 : 2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| VDE 0468-1 : 2015 | Environmental testing Part 1: General and guidance (IEC 60068-1:2013) |
| VDE 0847-4-5 : 2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-5: TESTING AND MEASUREMENT TECHNIQUES - SURGE IMMUNITY TEST (IEC 61000-4-5:2014) |
| ISO 7005-3:1988 | Metallic flanges Part 3: Copper alloy and composite flanges |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| DIN EN 61000-4-5 : 2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-5: TESTING AND MEASUREMENT TECHNIQUES - SURGE IMMUNITY TEST (IEC 61000-4-5:2014) |
| VDE 0847-4-2 : 2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
| VDE 0468-3-1 : 2012-04 | UMGEBUNGSEINFLUESSE - TEIL 3-1: UNTERSTUETZENDE DOKUMENTATION UND LEITFADEN - PRUEFVERFAHREN KAELTE UND TROCKENE WAERME (IEC 60068-3-1:2011) |
| VDE 0839-6-1 : 2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| VDE 0847-4-11 : 2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS |
| VDE 0839-6-2 : 2006 COR 1 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - GENERIC STANDARDS; IMMUNITY FOR INDUSTRIAL ENVIRONMENTS |
| DIN EN 61000-4-4 : 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| ISO 4064-3:2014 | Water meters for cold potable water and hot water — Part 3: Test report format |
| IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
| DIN EN 60068-2-30:2006-06 | ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE) |
| OIML B 3 : 2011 | OIML BASIC CERTIFICATE SYSTEM FOR OIML TYPE EVALUATION OF MEASURING INSTRUMENTS |
| VDE 0468-2-2 : 2008 | ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT |
| VDE 0847-4-1 : 2007 | |
| DIN EN 60068-2-1 : 1995 | ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| VDE 0847-4-4 : 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
| DIN EN 61000-2-2 : 2003 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-2: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS |
| VDE 0468-2-31 : 2009 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
| IEC 60068-2-47:2005 | Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests |
| DIN EN 60068-1 : 2015 | ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE (IEC 60068-1:2013) |
| DIN EN 61000-4-6 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| DIN EN 61000-4-3 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| DIN EN 61000-4-1 : 2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES |
| DIN EN 60068-2-47:2006-03 | ENVIRONMENTAL TESTING - PART 2-47: TESTS - MOUNTING OF SPECIMENS FOR VIBRATION, IMPACT AND SIMILAR DYNAMIC TESTS |
| VDE 0839-2-2 : 2003 | ELEKTROMAGNETISCHE VERTRAEGLICHKEIT (EMV) - UMGEBUNGSBEDINGUNGEN - VERTRAEGLICHKEITSPEGEL FUER NIEDERFREQUENTE LEITUNGSGEFUEHRTE STOERGROESSEN UND SIGNALUEBERTRAGUNG IN OEFFENTLICHEN NIEDERSPANNUNGSNETZEN |
| IEC 61000-2-2:2002+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| DIN EN ISO 4064-1:2017-10 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014) |
| DIN EN 60654-2:1998-08 | OPERATING CONDITIONS FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT - PART 2: POWER |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 60068-3-4:2001 | Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests |
| DIN EN 60068-3-4:2002-11 | Environmental testing - Part 3-4: Supporting documentation and guidance; Damp heat tests (IEC 60068-3-4:2001); German version EN 60068-3-4:2002 |
| DIN EN 61000-4-2 : 2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
| VDE 0847-4-3 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| VDE 0468-2-64 : 2009 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| DIN EN 60068-2-31 : 2009 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
| ISO 4064-1:2014 | Water meters for cold potable water and hot water Part 1: Metrological and technical requirements |
| DIN EN 60068-3-1 : 2012-04 | ENVIRONMENTAL TESTING - PART 3-1: SUPPORTING DOCUMENTATION AND GUIDANCE - COLD AND DRY HEAT TESTS (IEC 60068-3-1:2011) |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.