DIN EN ISO 18278-2:2016-09
Current
Current
The latest, up-to-date edition.
RESISTANCE WELDING - WELDABILITY - PART 2: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELDING (ISO 18278-2:2016)
Available format(s)
Hardcopy , PDF
Language(s)
German, English
Published date
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
National Annex NA (informative) - Bibliography
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Welding equipment
5 Preliminary adjustments
6 Determination of the welding current range
7 Estimation of electrode life
8 Test report
Annex A (informative) - Electrode alignment
Annex B (informative) - Specific conditions for steel sheet
customer qualification
Annex C (informative) - Test specimens for mechanical
characterization
Annex D (informative) - Example of test report for welding
current range
Annex E (informative) - Example of test report for electrode
life test
Bibliography
This standard is included in DIN Handbook 312.
| DocumentType |
Standard
|
| Pages |
27
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 18278-2 : 2016 | Identical |
| ISO 18278-2:2016 | Identical |
| NBN EN ISO 18278-2 : 2016 | Identical |
| NEN EN ISO 18278-2 : 2016 | Identical |
| NS EN ISO 18278-2 : 2004 | Identical |
| I.S. EN ISO 18278-2:2016 | Identical |
| SN EN ISO 18278-2:2016 | Identical |
| UNI EN ISO 18278-2 : 2006 | Identical |
| UNE-EN ISO 18278-2:2016 | Identical |
| BS EN ISO 18278-2:2016 | Identical |
| EN ISO 18278-2:2016 | Identical |
| DIN EN ISO 18278-1:2015-08 | Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
| DIN DVS HDBK 312 : 4ED 2017 | |
| DIN DVS HDBK 393 : 1ED 2006 | SCHWEISSTECHNIK 11 - NORMEN, DVS-MERKBLAETTER UND RICHTLINIEN IM BEREICH WIDERSTANDSSCHWEISSEN - PRUEFEN UND QUALITAETSSICHERUNG |
| DIN EN ISO 14373:2015-06 | Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2015) |
| DIN DVS HDBK 312/2 : 3ED 2010 | SCHWEISSTECHNIK 11 - WIDERSTANDSSCHWEISSEN - QUALITAETSSICHERUNG UND PRUEFUNG |
| DIN EN ISO 14270:2002-04 | RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - SPECIMEN DIMENSIONS AND PROCEDURE FOR MECHANIZED PEEL TESTING RESISTANCE SPOT, SEAM AND EMBOSSED PROJECTION WELDS (ISO 14270:2016) |
| DIN EN ISO 17657-2:2007-09 | Resistance welding - Welding current measurement for resistance welding - Part 2: Welding current meter with current sensing coil (ISO 17657-2:2005) |
| ISO 5182:2016 | Resistance welding Materials for electrodes and ancillary equipment |
| ISO 14373:2015 | Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels |
| DIN EN ISO 18278-1:2015-08 | Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
| ISO 17657-5:2005 | Resistance welding — Welding current measurement for resistance welding — Part 5: Verification of welding current measuring system |
| ISO 14271:2017 | Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
| ISO 17657-1:2005 | Resistance welding — Welding current measurement for resistance welding — Part 1: Guidelines for measurement |
| ISO 17657-2:2005 | Resistance welding — Welding current measurement for resistance welding — Part 2: Welding current meter with current sensing coil |
| ISO 14270:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds |
| ISO 10447:2015 | Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds |
| DIN EN ISO 10447:2015-05 | Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2015) |
| ISO 14272:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds |
| DIN EN ISO 14272:2002-04 | RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - SPECIMEN DIMENSIONS AND PROCEDURE FOR CROSS TENSION TESTING OF RESISTANCE SPOT AND EMBOSSED PROJECTION WELDS (ISO 14272:2016) |
| DIN EN ISO 17657-5:2007-09 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 5: VERIFICATION OF WELDING CURRENT MEASURING SYSTEM |
| DIN EN ISO 14327:2004-06 | Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding (ISO 14327:2004) |
| ISO 14273:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds |
| DIN EN ISO 15609-5:2012-03 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011) |
| DIN EN ISO 14271:2012-11 | RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS (ISO 14271:2017) |
| DIN EN ISO 17653:2012-08 | Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012) |
| ISO 17653:2012 | Resistance welding — Destructive tests on welds in metallic materials — Torsion test of resistance spot welds |
| DIN EN ISO 5821:2010-04 | Resistance welding - Spot welding electrode caps (ISO 5821:2009) |
| DIN EN ISO 14373:2015-06 | Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2015) |
| DIN EN ISO 14273:2002-03 | RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - SPECIMEN DIMENSIONS AND PROCEDURE FOR TENSILE SHEAR TESTING RESISTANCE SPOT AND EMBOSSED PROJECTION WELDS (ISO 14273:2016) |
| ISO 669:2016 | Resistance welding Resistance welding equipment Mechanical and electrical requirements |
| ISO 14327:2004 | Resistance welding Procedures for determining the weldability lobe for resistance spot, projection and seam welding |
| DIN EN ISO 17657-1:2007-09 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 1: GUIDELINES FOR MEASUREMENT |
| DIN EN ISO 5182:2015-03 (Draft) | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
| ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding |
| DIN EN ISO 17677-1:2010-01 | RESISTANCE WELDING - VOCABULARY - PART 1: SPOT, PROJECTION AND SEAM WELDING |
| DIN EN ISO 669:2016-07 | RESISTANCE WELDING - RESISTANCE WELDING EQUIPMENT - MECHANICAL AND ELECTRICAL REQUIREMENTS (ISO 669:2016) |
| ISO 17677-1:2009 | Resistance welding Vocabulary Part 1: Spot, projection and seam welding |
| ISO 18278-1:2015 | Resistance welding Weldability Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials |
| ISO 5821:2009 | Resistance welding — Spot welding electrode caps |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.