DIN EN ISO 14253-1:2013-12
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR PROVING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2013)
Available format(s)
Hardcopy , PDF
Superseded date
07-03-2021
Superseded by
Language(s)
German, English
Published date
01-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.This standard is included in DIN Handbook 11-1 and 303.
| DevelopmentNote |
DRAFT 2016 issued in July 2016. (07/2016)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO 14253-1:2017 | Identical |
| NBN EN ISO 14253-1 : 2013 | Identical |
| I.S. EN ISO 14253-1:2013 | Identical |
| SN EN ISO 14253-1 : 2013 | Identical |
| UNI EN ISO 14253-1 : 2013 | Identical |
| ONORM EN ISO 14253-1 : 2014 | Identical |
| BS EN ISO 14253-1:2013 | Identical |
| UNE-EN ISO 14253-1:2015 | Identical |
| NS EN ISO 14253-1 : 2017 | Identical |
| NEN EN ISO 14253-1 : 2018 | Identical |
| EN ISO 14253-1:2017 | Identical |
| NF EN ISO 14253-1 : 2017 | Identical |
| I.S. EN ISO 14253-1:2017 | Identical |
| DIN 874-1:2003-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHT EDGES - PART 1: STEEL STRAIGHT EDGES - DIMENSIONS, TECHNICAL DELIVERY CONDITIONS |
| DIN EN ISO 10360-7:2011-09 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011) |
| DIN 863-1:2016-07 (Draft) | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MICROMETERS - PART 1: MICROMETERS FOR EXTERNAL MEASUREMENTS; MAXIMUM PERMISSIBLE ERRORS |
| DIN 874-2:2003-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHT EDGES - PART 2: KNIFE EDGE STRAIGHT EDGES - DIMENSIONS, TECHNICAL DELIVERY CONDITIONS |
| DIN EN ISO 11137-3:2015-08 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017) |
| DIN EN ISO 463 : 2009-07 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
| VDI/VDE 2660 Blatt 1:2010-07 | Experimental stress analysis - Optical strain sensor based on fibre Bragg grating - Fundamentals, characteristics and sensor testing |
| VDI/VDE 2617 Blatt 6.1:2007-05 | Accuracy of coordinate measuring machines - Characteristics and their testing - Coordinate measuring machines with optical probing - Code of practice for the application of DIN EN ISO 10360 to coordinate measuring machines with optical sensors for lateral structures |
| VDI/VDE 2617 Blatt 4:2006-05 | Accuracy of coordinate measuring machines - Characteristics and their checking - Manual for the use of DIN EN ISO 10360-3 for coordinate measuring machines with additional axes of rotation |
| DIN EN ISO 2538-2:2015-01 | Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
| DIN HDBK 303 : 2ED 2008 | |
| DIN EN ISO 11608-5:2013-01 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
| DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| DIN EN ISO 8015:2011-09 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| DIN EN ISO 13385-1:2011-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011) |
| DIN EN ISO 25178-605:2014-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS (ISO 25178-605:2014) |
| DIN EN ISO 12781-1:2011-07 | Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011) |
| DIN EN ISO 10360-6:2009-01 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES |
| VDI/VDE/DGQ 2618 Blatt 1.2:2003-12 | Inspection of measuring and test equipment - Instructions for the inspection of measuring and test equipment for geometrical quantities - Uncertainty of measurement |
| VDI/VDE 2617 Blatt 10:2011-01 | Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests of lasertrackers |
| VDI/VDE/DGQ/DKD 2622 Blatt 15.1:2011-10 | Calibration for measuring equipment for electrical quantities - Artificial mains networks |
| VDI/VDE 2617 Blatt 7:2008-09 | Accuracy of coordinate measuring machines - Parameters and their checking - Estimation of measurement uncertainty of coordinate measuring machines by means of simulation |
| VDI/VDE 2617 Blatt 5:2010-12 | Accuracy of coordinate measuring machines - Parameters and their reverification - Interim check with artefacts |
| VDI/VDE 2600 Blatt 1:2013-10 | Inspection process management - Identification, classification and proof of suitability for inspection processes |
| VDI/VDE 2617 Blatt 2.1:2014-03 | Accuracy of coordinate measuring machines - Parameters and their reverification - Code of practice for the application of DIN EN ISO 10360-2 for length measurement |
| VDI/VDE/DGQ/DKD 2622 Blatt 19:2015-06 | Calibration of measuring equipment for electrical quantities - Characterisation of HF-measuring cables |
| VDI/VDE/DGQ/DKD 2622 Blatt 15.4:2010-05 | Calibration of measuring equipment for electrical quantities - Passive measuring equipment for use in EMC-applications - Current clamps |
| VDI/VDE 2617 Blatt 12.1:2011-03 | Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests for tactile CMM measuring microgeometries |
| VDI/VDE 2634 Blatt 2:2012-08 | Optical 3-D measuring systems - Optical systems based on area scanning |
| VDI/VDE 2629 Blatt 2:2012-06 | Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces |
| VDI/VDE 2617 Blatt 8:2006-07 | Accuracy of coordinate measuring machines - Characteristics and their testing - Test suitability of measurements with coordinate measuring machines |
| VDI/VDE 2617 Blatt 9:2009-06 | Accuracy of coordinate measuring machines - Characteristics and their reverification - Acceptance and reverification tests for Articulated Arm Coordinate Measuring Machines |
| VDI/VDE 2617 Blatt 13; VDI/VDE 2630 Blatt 1.3:2011-12 | VDI/VDE 2617 Blatt 13: Accuracy of coordinate measuring machines - Characteristics and their testing - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors - VDI/VDE 2630 Blatt 1.3: Computed tomography in dimensional measurement - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors |
| VDI/VDE 2617 Blatt 11:2011-03 | Accuracy of coordinate measuring machines - Characteristics and their checking - Determination of the uncertainty of measurement for coordinate measuring machines using uncertainty budgets |
| VDI/VDE/DGQ/DKD 2622 Blatt 21:2004-05 | Calibration of measurement equipments for electrical quantities - Recorders |
| VDI/VDE 2630 Blatt 1.2:2010-11 | Computed tomography in dimensional measurement - Influencing variables on measurement results and recommendations for computed tomography dimensional measurements |
| VDI/VDE 2630 Blatt 2.1:2015-06 | Computed tomography in dimensional measurement - Determination of the uncertainty of measurement and the test process suitability of coordinate measurement systems with CT sensors |
| VDI/VDE/DGQ 2618 Blatt 1.1:2001-12 | Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Basic principals |
| VDI/VDE 2634 Blatt 3:2008-12 | Optical 3D-measuring systems - Multiple view systems based on area scanning |
| VDI/VDE 2629 Blatt 1:2008-08 | Accuracy of contour-measuring systems - Characteristics and checking of characteristics - Acceptance testing and reverification testing of contour-measuring systems according to the tactile stylus method |
| VDI/VDE/DGQ/DKD 2622 Blatt 1:2014-06 | Calibration of measuring equipment for electrical quantities - Fundamentals |
| VDI/VDE 2624 Blatt 2.1:2008-12 | Measurement of mechanical quantities - Instructions for calibration of mobile force measurement systems |
| DIN EN ISO 13225:2012-08 | Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
| DIN EN ISO 12180-2:2011-07 | Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011) |
| DIN EN ISO 10360-10:2017-03 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016) |
| DIN EN ISO 25178-70:2014-06 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| DIN EN ISO 2538-1:2015-01 | GEOMETRICAL PRODUCT SPECFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES; (ISO 2538-1:2014) |
| DIN EN ISO 10360-2:2010-06 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009) |
| DIN EN ISO 10360-5:2011-01 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS |
| DIN EN ISO 2692:2015-12 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
| DIN EN ISO 14978:2006-09 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| DIN EN ISO 11608-1:2015-04 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| DIN EN ISO 12781-2:2011-07 | Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011) |
| DIN EN ISO 14405-3:2013-08 (Draft) | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016) |
| DIN EN ISO 13102:2012-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012) |
| DIN HDBK 11-1 : 4ED 2016 | |
| DIN EN ISO 12780-2:2011-07 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
| DIN EN ISO 14253-3:2011-10 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011) |
| DIN EN ISO 16610-71:2014-12 | Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) |
| DIN 16742:2013-10 | PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS |
| DIN EN ISO 14253-2:2011-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION (ISO 14253-2:2011) |
| DIN EN ISO 3650:1999-02 | Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998); German version EN ISO 3650:1998 |
| DIN EN ISO 5436-1:2000-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - MEASUREMENT STANDARDS - PART 1: MATERIAL MEASURES |
| DIN EN ISO 1938-1:2016-03 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
| DIN EN ISO 1938-2:2017-05 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
| DIN EN ISO 12181-2:2011-07 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
| DIN EN ISO 16610-31:2015-09 (Draft) | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016) |
| DIN EN ISO 13385-2:2013-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-2:2011) |
| DIN EN ISO 10360-8:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013) |
| DIN EN ISO 25178-3:2012-11 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012); German version EN ISO 25178-3:2012 |
| DIN EN ISO 1119:2012-04 | Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
| DIN EN ISO 10535:2007-04 | Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006) |
| DIN EN ISO 12179:2000-11 | GPS - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000); English version of DIN EN ISO 12179 |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| DIN EN ISO 9000:2015-11 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 14253-2:2011 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| DIN ISO 3534-2:2013-12 | STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS (ISO 3534-2:2006) |
| ISO 25378:2011 | Geometrical product specifications (GPS) Characteristics and conditions Definitions |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.