DIN EN ISO 11612:2015-11
Current
The latest, up-to-date edition.
PROTECTIVE CLOTHING - CLOTHING TO PROTECT AGAINST HEAT AND FLAME - MINIMUM PERFORMANCE REQUIREMENTS (ISO 11612:2015)
Hardcopy , PDF
English, German
01-11-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Nationales Vorwort
Nationaler Anhang NA (informativ) - Literaturhinweise
Europäisches Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Allgemeine Anforderungen und Anforderungen
an die Ausführung
5 Probenahme und Vorbehandlung
6 Allgemeine Leistungsanforderungen
7 Leistungsanforderungen an den Wärmedurchgang
8 Zusammenfassung der Prüfungen des Wärmedurchgangs
und entsprechenden Codebuchstaben (siehe Tabelle 8)
9 Optionale Prüfung - Prüfung des vollständigen
Kleidungsstückes gegen Brandeinwirkung auf eine
thermische Gliederpuppe
10 Kennzeichnung
11 Informationen des Herstellers
Anhang A (normativ) - Mechanische Vorbehandlung für
metallisierte Materialien
Anhang B (normativ) - Bestimmung der Eigenschaftswerte
zur Bewertung und Klassifizierung
Anhang C (informativ) - Leitfaden für die Gestaltung der
Kleidung
Anhang D (informativ) - Risikobeurteilung
Anhang E (normativ) - Messunsicherheit
Anhang ZA (informativ) - Zusammenhang zwischen die
ser Europäischen Norm und den grundlegenden
Anforderungen der EU-Richtlinie 89/686/EWG
Literaturhinweise
This standard is included in DIN Handbook 485.
| Committee |
TC 94
|
| DevelopmentNote |
Supersedes DIN EN 531. (05/2009)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN ISO 11612:2015 | Identical |
| ISO 11612:2015 | Identical |
| DIN HDBK 485 : 2ED 2016 | |
| DGUV INFORMATION 205-014 : 2016 | AUSWAHL VON PERSOENLICHER SCHUTZAUSRUESTUNG FUER EINSAETZE BEI DER FEUERWEHR - BASIEREND AUF EINER GEFAEHRDUNGSBEURTEILUNG |
| DGUV INFORMATION 212-016 : 2010 |
| DIN EN ISO 13688:2013-12 | Protective clothing - General requirements (ISO 13688:2013) |
| DIN ISO 7000:2008-12 | Graphical symbols for use on equipment - Index and synopsis (ISO 7000:2004 + ISO 7000 Database:2008 up to ISO 7000-2750) |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| ISO 3175-2:2010 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene |
| ISO 4045:2008 | Leather Chemical tests Determination of pH |
| DIN ISO 13506:2008-12 | PROTECTIVE CLOTHING AGAINST HEAT AND FLAME - TEST METHOD FOR COMPLETE GARMENTS - PREDICTION OF BURN INJURY USING AN INSTRUMENTED MANIKIN |
| ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
| ISO 13688:2013 | Protective clothing — General requirements |
| ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| ISO 13938-2:1999 | Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension |
| DIN EN ISO 12127-1:2016-05 | CLOTHING TO PROTECT AGAINST HEAT AND FLAME - DETERMINATION OF CONTACT HEAT TRANSMISSION THROUGH CLOTHING OR CONSTITUENT MATERIALS - PART 1: CONTACT HEAT PRODUCED BY HEATING CYLINDER (ISO 12127-1:2015) |
| ISO 9151:2016 | Protective clothing against heat and flame Determination of heat transmission on exposure to flame |
| ISO/TR 11610:2004 | Protective clothing — Vocabulary |
| ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
| ISO 17493:2016 | Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven |
| DIN EN ISO 13935-2:2014-07 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014) |
| ISO/TR 2801:2007 | Clothing for protection against heat and flame General recommendations for selection, care and use of protective clothing |
| ISO 3071:2005 | Textiles Determination of pH of aqueous extract |
| ISO 12127-1:2015 | Clothing for protection against heat and flame Determination of contact heat transmission through protective clothing or constituent materials Part 1: Contact heat produced by heating cylinder |
| DIN EN ISO 9151:2015-12 (Draft) | PROTECTIVE CLOTHING AGAINST HEAT AND FLAME - DETERMINATION OF HEAT TRANSMISSION ON EXPOSURE TO FLAME (ISO 9151:2016, CORRECTED VERSION 2017-04-01) |
| DIN EN ISO 15025:2015-12 (Draft) | PROTECTIVE CLOTHING - PROTECTION AGAINST FLAME - METHOD OF TEST FOR LIMITED FLAME SPREAD (ISO 15025:2016) |
| DIN EN ISO 13934-1:2013-08 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013) |
| ISO 4048:2008 | Leather Chemical tests Determination of matter soluble in dichloromethane and free fatty acid content |
| DIN EN ISO 3377-1:2012-03 | Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2011) |
| ISO 17075:2007 | Leather Chemical tests Determination of chromium(VI) content |
| ISO 15797:2002 | Textiles Industrial washing and finishing procedures for testing of workwear |
| DIN EN ISO 6942:2002-09 | Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002); English version of DIN EN ISO 6942 |
| ISO 13938-1:1999 | Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| DIN EN ISO 3376:2012-03 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF TENSILE STRENGTH AND PERCENTAGE EXTENSION (ISO 3376:2011) |
| ISO 3376:2011 | Leather Physical and mechanical tests Determination of tensile strength and percentage extension |
| ISO 9185:2007 | Protective clothing — Assessment of resistance of materials to molten metal splash |
| DIN EN ISO 13938-1:1999-10 | TEXTILES - BURSTING PROPERTIES OF FABRICS - PART 1: HYDRAULIC METHOD FOR DETERMINATION OF BURSTING STRENGTH AND BURSTING DISTENSION |
| ISO 13506:2008 | Protective clothing against heat and flame Test method for complete garments Prediction of burn injury using an instrumented manikin |
| ISO 3377-1:2011 | Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.