• Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

DIN EN 89:2015-08

Current

Current

The latest, up-to-date edition.

GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER

Available format(s)

Hardcopy , PDF

Language(s)

German, English

Published date

01-01-2015

£263.84
Excluding VAT

National foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of storage water heaters
5 Construction requirement
6 Operational requirements
7 Rational use of energy
8 Fitness for purpose
9 Marking and instructions
10 Ecodesign Data
11 Energy Labelling Data
12 Figures referenced in this standard
Annex A (informative) - National situations
Annex B (normative) - Test apparatus for type
        C[11] appliances
Annex C (normative) - Test apparatus for type
        C[21] appliances
Annex D (informative) - Examples of composition
        of the gas circuit
Annex E (normative) - Soundness test - Volumetric
        method
Annex F (informative) - Guidelines for extension to
        other categories
Annex G (informative) - A - deviations
Annex H (informative) - NO[x] conversion calculation
Annex I (informative) - Requirements and test methods
        for separate air supply and combustion products
        evacuation ducts of type C6 water heaters
Annex J (normative) - Lists of materials currently used
Annex K (normative) - Test methods to determine the
        effects of to long-term thermal load, long-term
        condensate exposure, condensing/non-condensing
        cycling and resistance to UV radiation
Annex L (normative) - Parts in copper or copper alloys
Annex M (informative) - Compilation of the test
        conditions for the various gas families
Annex N (informative) - Alternative Method for the
        determination of the nominal heat input or the
        maximum and minimum heat input (according
        to 6.3.1) for appliances using a pneumatic gas/air
        ratio control system
Annex ZA (informative) - Clauses of this European
         Standard addressing essential requirements or
         other provisions of UE Directives
Annex ZB (informative) - Relationship between this
         European Standard and the requirements of
         Commission Regulation (EU) No 814/2013
Annex ZC (informative) - Relationship between this
         European Standard and the requirements of
         Commission Delegated Regulation (EU)
         No 812/2013
Bibliography

Specifies the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment and classification and marking of gas-fired storage water heaters for domestic hot water uses, hereafter called 'appliance'.

DevelopmentNote
Supersedes DIN 3377. (05/2001) DRAFT AMD 1 issued in February 2017. (02/2017)
DocumentType
Standard
Pages
161
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current
Supersedes

Standards Relationship
BS EN 89:2015 Identical
UNI EN 89 : 2008 Identical
SN EN 89:2015 Identical
NS EN 89 : 1999 Identical
I.S. EN 89:2015 Identical
UNE-EN 89:2016 Identical
NEN EN 89 : 2015 Identical
EN 89:2015 Identical
NBN EN 89 : 2015 Identical

VDI 3805 Blatt 20:2017-02 Product data exchange in the building services - Storage tanks and instantaneous water heater
BGR 146 : 2003 FLUESSIGGASANLAGEN ZU HAUSHALTSZWECKEN AUF WASSERFAHRZEUGEN IN DER BINNENSCHIFFAHRT
VDE 0700-450 : 2001 ELECTRICAL EQUIPMENT OF NON-ELECTRIC APPLIANCES FOR HOUSEHOLD AND SIMILAR PURPOSES - SAFETY REQUIREMENTS

EN 1859:2009+A1:2013 Chimneys - Metal chimneys - Test methods
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
ISO 815-1:2014 Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
EN 1490:2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN 13203-1:2015 Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries
EN 13216-1:2004 Chimneys - Test methods for system chimneys - Part 1: General test methods
ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
EN 13203-2:2015 Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption
ISO 8256:2004 Plastics — Determination of tensile-impact strength
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN 14241-1:2013 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
EN 14459:2015 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements
EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
ISO 7619:1997 Rubber Determination of indentation hardness by means of pocket hardness meters
EN 126:2012 Multifunctional controls for gas burning appliances
CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
CR 1404:1994 Determination of emissions from appliances burning gaseous fuels during type-testing
EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
ISO 6914:2013 Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension
EN 14471:2013+A1:2015 Chimneys - System chimneys with plastic flue liners - Requirements and test methods
ISO 179-1:2010 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
EN 1856-1:2009 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipment
ISO 301:2006 Zinc alloy ingots intended for castings
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
ISO 178:2010 Plastics Determination of flexural properties
ISO 9969:2016 Thermoplastics pipes Determination of ring stiffness
EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 573-1:2004 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
ISO 2781:2008 Rubber, vulcanized or thermoplastic Determination of density

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.