DIN EN 836 A1 : 1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY
Hardcopy , PDF
01-03-2014
English
01-01-1998
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Safety requirements and/or measures
5 Information for use
Annex A (normative) - List of hazards
Annex B (informative) - Examples of pictograms that
may be used for lawnmower marking
Annex C (normative) - Test enclosure target panels - Corrugated
fibreboard penetration test
Annex D (normative) Target panel elevation areas and
suggested data sheet for thrown object test
Annex E (normative) Test enclosure
Annex F (informative) - Safety instructions - Rotary
lawnmowers, (pedestrian and ride-on) -
Cylinder lawnmowers (pedestrian and ride-on)
Annex G (normative) - Vibration
Annex H (normative) - Noise test code - Engineering
method (grade 2)
Annex I (informative) - Example of a material and construction
fulfilling the requirements for an artificial surface
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Defines safety requirements and their verification for the design and construction of powered rotary and cylinder lawnmowers, including pedestrian-controlled and ride-on (riding) types, and lawn and garden tractors, professional lawnmowers, and lawn and garden tractors with mowing attachments.
| DocumentType |
Standard
|
| Pages |
82
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| NF EN 836 : 1997 + A4 2011 | Identical |
| UNI EN 836 : 2011 | Identical |
| NS EN 836 : 1997 + A4 2011 | Identical |
| NEN EN 836 : 1997 + A4 2011 | Identical |
| NBN EN 836 : 1997 + A4 2011 | Identical |
| BS EN 836 : 1997 | Identical |
| EN 836:1997+A4:2011 | Identical |
| I.S. EN 836:1997 | Identical |
| SN EN 836 : 1998 + A4 2011 | Identical |
| ISO 9193:1990 | Lawn and garden ride-on (riding) tractors — Power take-off |
| EN 50338:2006 | Safety of household and similar electrical appliances - Particular requirements for pedestrian-controlled battery powered electrical lawn mowers |
| EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 4253:1993 | Agricultural tractors — Operator's seating accommodation — Dimensions |
| ISO 3767-3:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 3: Symbols for powered lawn and garden equipment |
| ISO 3767-2:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 2: Symbols for agricultural tractors and machinery |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 9190:1990 | Lawn and garden ride-on (riding) tractors Drawbar |
| ISO 5353:1995 | Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point |
| ISO 500:1991 | Agricultural tractors Rear-mounted power take-off Types 1, 2 and 3 |
| EN 1033 : 1995 | HAND-ARM VIBRATION - LABORATORY MEASUREMENT OF VIBRATION AT THE GRIP SURFACE OF HAND-GUIDED MACHINERY - GENERAL |
| EN ISO 11820:1996 | Acoustics - Measurements on silencers in situ (ISO 11820:1996) |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| CR 1030-1:1995 | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery |
| ISO 3305:1985 | Plain end welded precision steel tubes — Technical conditions for delivery |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN ISO 5674:2009 | Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01) |
| ISO 11820:1996 | Acoustics — Measurements on silencers in situ |
| EN ISO 5353:1998 | Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995) |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| ISO 5673:1993 | Agricultural tractors and machinery Power take-off drive shafts and position of power-input connection |
| EN 60335-2-77:2010 | Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| ISO 3767-1:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 1: Common symbols |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| IEC 60335-2-77:2002 | Household and similar electrical appliances - Safety - Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers |
| ISO 5674:2004 | Tractors and machinery for agriculture and forestry Guards for power take-off (PTO) drive-shafts Strength and wear tests and acceptance criteria |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO 4046:1978 | Paper, board, pulp and related terms — Vocabulary |
| EN ISO 6682:2008 | Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
| ISO 3304:1985 | Plain end seamless precision steel tubes — Technical conditions for delivery |
| ISO 9192:1991 | Lawn and garden ride-on (riding) tractors — One-point tubular sleeve hitch |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN ISO 11691:2009 | Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) |
| ISO 9191:1991 | Lawn and garden ride-on (riding) tractors — Three-point hitch |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 11691:1995 | Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method |
| ISO 3306:1985 | Plain end as-welded and sized precision steel tubes — Technical conditions for delivery |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.