DIN EN 60296 : 2012
Current
The latest, up-to-date edition.
FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR (IEC 60296:2012)
Hardcopy
German
01-12-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Properties of oil
4.1 Functional properties
4.2 Refining and stability
4.3 Performance
4.4 Health, safety and environment (HSE) properties
5 Classification, identification, general delivery
requirements and sampling
5.1 Classification
5.2 Requirements
5.3 Mixability
5.4 Identification and general delivery requirements
5.5 Sampling
6 Properties, their significance and test methods
6.1 Viscosity
6.2 Pour point
6.3 Water content
6.4 Breakdown voltage
6.5 Dielectric dissipation factor (DDF)
6.6 Appearance
6.7 Acidity
6.8 Interfacial tension (IFT)
6.9 Sulfur content
6.10 Corrosive sulfur
6.11 Antioxidant additive content
6.12 Oxidation stability
6.13 Gassing
6.14 Electrostatic charging tendency (ECT)
6.15 Flash point
6.16 Density
6.17 Polycyclic aromatics (PCA)
6.18 Polychlorinated biphenyls (PCB)
6.19 2-Furfural and related compounds (2-FAL)
7 Specific requirements for special applications
7.1 Higher oxidation stability and low sulfur content
7.2 Electrostatic charging tendency (ECT)
7.3 Gassing
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Annex ZB (normative) Special national conditions
Bibliography
| DevelopmentNote |
Supersedes DIN 57370-1 and DIN VDE 0370-1. (01/2005) Supersedes DIN IEC 60296. (01/2013)
|
| DocumentType |
Standard
|
| Pages |
0
|
| PublisherName |
Verband Deutscher Elektrotechniker
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN 60296 : 2012 | Identical |
| VDE 0370-1 : 2012 | Corresponds |
| UNE-EN 60296:2012 | Identical |
| EN 60296:2012 | Identical |
| IEC 60296:2012 RLV | Identical |
| I.S. EN 60296:2012 | Identical |
| NF EN 60296 : 2014 | Identical |
| BS EN 60296:2012 | Identical |
| DIN EN ISO 17855-2:2016-06 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
| DIN EN ISO 15103-2:2007-09 | PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 1872-2:2000-12 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 175:2011-03 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| DIN EN ISO 19069-2:2016-07 | PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016) |
| DIN EN ISO 1874-2:2013-03 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012) |
| DIN EN ISO 16396-2:2017-07 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| DIN EN ISO 20028-2:2015-08 (Draft) | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
| DIN EN ISO 11542-2:2010-01 | Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007) (includes Corrigendum AC:2008) |
| DIN EN ISO 25137-2:2016-08 (Draft) | PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009) |
| DIN EN ISO 8986-2:2010-04 | PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.