DIN EN 54-25:2015-10 (Draft)
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
Hardcopy , PDF
07-03-2021
German
01-01-2015
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe und Abkürzungen
3.1 Begriffe
3.2 Abkürzungen
4 Systemanforderungen
4.1 Allgemeines
4.2 Hochfrequenzverbindungen
5 Anforderungen an die Bestandteile
5.1 Übereinstimmung
5.2 Allgemeines
5.3 Energieversorgungseinrichtung
5.4 Anforderungen an die Umweltprüfung
6 Dokumentation
7 Kennzeichnung
8 Prüfungen
8.1 Allgemeine Anforderungen
8.2 Systemprüfungen
8.3 Prüfung der Bestandteile
Anhang A (normativ) Prüfkonfiguration für die Verwendung
des gegen Hochfrequenzen abgeschirmten Prüfgerätes
Anhang B (normativ) Immunität gegen Streckendämpfung
(Unterbrechung des Übertragungsweges)
Anhang C (informativ) Daten und Berechnung der
Lebensdauer autonomer Energiequelle(n)
Anhang ZA (informativ) Abschnitte dieser Europäischen
Norm, die die Bestimmungen der
EG-Bauproduktenrichtlinie (89/106/EWG)
betreffen
Literaturhinweise
Defines requirements, test methods and performance criteria for components used in fire alarms systems, installed in and around buildings, which use radio frequency links (RF links) to communicate.
DevelopmentNote |
DRAFT 2015 issued in October 2015. (10/2015)
|
DocumentType |
Draft
|
Pages |
184
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Withdrawn
|
Standards | Relationship |
NEN EN 54-25 : 2008 C2 2012 | Identical |
BS EN 54-25:2008 | Identical |
NF EN 54-25 : 2008 | Identical |
EN 60068-2-42:2003 | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
VDE 0833-2 :2017-10 | ALARM SYSTEMS FOR FIRE, INTRUSION AND HOLD UP - PART 2: REQUIREMENTS FOR FIRE ALARM SYSTEMS |
IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 54-5:2017 | Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors |
EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
DIN VDE 0833-2:2017-10 | ALARM SYSTEMS FOR FIRE, INTRUSION AND HOLD UP - PART 2: REQUIREMENTS FOR FIRE ALARM SYSTEMS |
EN 300 113-1 : 1.7.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); LAND MOBILE SERVICE; RADIO EQUIPMENT INTENDED FOR THE TRANSMISSION OF DATA (AND/OR SPEECH) USING CONSTANT OR NON-CONSTANT ENVELOPE MODULATION AND HAVING AN ANTENNA CONNECTOR; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT |
EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
ISO 9001:2015 | Quality management systems — Requirements |
IEC 60068-2-42:2003 | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 50130-4:2011/A1:2014 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
EN 54-13:2017 | Fire detection and fire alarm systems - Part 13: Compatibility and connectability assessment of system components |
EN 300 220-1 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1000 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT |
IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.