DIN EN 485-1:2016-10
Current
Current
The latest, up-to-date edition.
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
Available format(s)
Hardcopy , PDF
Language(s)
English, German
Published date
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
National Annex NA (informative) - Bibliography
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Ordering information
5 Requirements
6 Test methods
7 Inspection document
8 Marking of products
9 Packaging
10 Complaints of non conformity
Annex A (normative) - European Standards for strip,
sheet and plate of special form and for special
applications
Bibliography
Describes the technical conditions for inspection and delivery of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general applications.
| DevelopmentNote |
Supersedes DIN 1745-2. (07/2002)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 485-1 : 2016 | Identical |
| NBN EN 485-1 : 2008 + A1 2010 | Identical |
| NF EN 485-1 : 2016 | Identical |
| SN EN 485-1 : 2016 | Identical |
| EN 485-1:2016 | Identical |
| I.S. EN 485-1:2016 | Identical |
| NS EN 485-1 : 2016 | Identical |
| UNE-EN 485-1:2017 | Identical |
| UNI EN 485-1 : 2009 | Identical |
| BS EN 485-1 : 2008 | Identical |
| BWB TL 8115-0007 : 4ED 2005 | LEBENSMITTEL-TRANSPORTBEHAELTER FUER VERPACKTE LEBENSMITTEL UND TRANSPORT-KISTE |
| DIN 17611:2011-11 | Anodized products of aluminium and wrought aluminium alloys - Technical conditions of delivery |
| DIN HDBK 450/1 : 4ED 2015 | ALUMINIUM 1 - BAENDER, BLECHE, PLATTEN, FOLIEN, BUTZEN, RONDEN, GESCHWEISSTE ROHRE, VORMATERIAL |
| BWB TL 8135-0039 : 6ED 2002 | PACKING AIDS, MOPPED CUSHIONING MATERIAL MADE OF POLYURETHANE FOAM |
| DIN 4140:2014-04 | Insulation work on industrial installations and building equipment - Execution of thermal and cold insulations |
| DIN 18339:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - SHEET METAL ROOFING AND WALL COVERING WORK |
| BWB TL 6350-0006 : 1ED 2008 | CONTROL AND WARNING UNIT FOR FIRE WARNING AND EXTINGUISHING SYSTEMS IN MBT LEOPARD 2 A5, A6 |
| DIN HDBK 450/4 : 1ED 2012 | |
| DIN HDBK 450 : 2ED 2005 | ALUMINIUM 1 - BAENDER, BLECHE, PLATTEN, FOLIEN, BUTZEN, RONDEN, GESCHWEISSTE ROHRE, VORMATERIAL |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ASTM G 67 : 2013 | Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test) |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 20482:2013 | Metallic materials — Sheet and strip — Erichsen cupping test |
| EN 851:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
| EN 573-5:2007 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 485-3:2003 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
| EN 485-2:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| EN 485-4:1993 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
| EN 13981-2:2004 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets |
| EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN ISO 20482:2013 | Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013) |
| EN 683-1:2006 | Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery |
| ISO 9591:2004 | Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking |
| ISO 7438:2016 | Metallic materials Bend test |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| EN 602:2004 | Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff |
| EN 13195:2013 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| ASTM G 66 : 1999 | Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) |
| EN 14392:2007 | Aluminium and aluminium alloys - Requirements for anodised products for use in contact with foodstuff |
| EN 541:2006 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
| EN 14286:2008 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
| EN 14121:2009 | Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| EN 941:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications |
| EN 2004-1:1993 | Aerospace series - Test methods for aluminium and aluminium alloy products - Part 1: Determination of electrical conductivity of wrought aluminium alloys |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 12482-2:1998 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock |
| EN 14287:2004 | Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components |
| EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| EN 1386:2007 | Aluminium and aluminium alloys - Tread plate - Specifications |
| EN 14361:2004 | Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts |
| EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| EN 12482-1:1998 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock |
| DIN EN ISO 9591:2001-06 (Draft) | CORROSION OF ALUMINIUM ALLOYS - DETERMINATION OF RESISTANCE TO STRESS CORROSION CRACKING |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN 15088:2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
| EN 1669:1996 | Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip |
| EN ISO 7438:2016 | Metallic materials - Bend test (ISO 7438:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.