DIN EN 16723-2:2017-10
Current
Current
The latest, up-to-date edition.
NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 2: AUTOMOTIVE FUELS SPECIFICATION
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Parameters and test methods
5 Sampling
6 Marking, labelling and packaging
Annex A (informative) - Parameters
Annex B (informative) - Odorization and sulfur
Annex C (informative) - Properties of gases at the extremities
of the Wobbe index ranges of the gas groups for gases
of the second family
Annex D (informative) - Voluntary dedicated grades
Bibliography
Describes the requirements and test methods for natural gas (group L and H, as in EN 437), biomethane and blends of both at the point of use as automotive fuels.
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| EN 16723-2:2017 | Identical |
| ISO 10715:1997 | Natural gas — Sampling guidelines |
| EN ISO 6974-6:2005 | Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002) |
| EN ISO 6326-1:2009 | Natural gas - Determination of sulfur compounds - Part 1: General introduction (ISO 6326-1:2007) |
| EN ISO 13443:2005 | Natural gas - Standard reference conditions (ISO 13443:1996 including Corrigendum 1:1997) |
| ISO 6974-6:2002 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| ISO 15971:2008 | Natural gas Measurement of properties Calorific value and Wobbe index |
| ISO 6327:1981 | Gas analysis — Determination of the water dew point of natural gas — Cooled surface condensation hygrometers |
| EN ISO 6327:2008 | Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers (ISO 6327:1981) |
| EN ISO 18453:2005 | Natural gas - Correlation between water content and water dew point (ISO 18453:2004) |
| ISO 6974-2:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations |
| ISO 6974-4:2000 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns |
| EN ISO 6326-5:1997 | Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989) |
| EN ISO 6974-5:2014 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons (ISO 6974-5:2014) |
| ISO/TR 12148:2009 | Natural gas — Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation) |
| EN 16726:2015 | Gas infrastructure - Quality of gas - Group H |
| ISO 15713:2006 | Stationary source emissions Sampling and determination of gaseous fluoride content |
| ISO/TR 11150:2007 | Natural gas - Hydrocarbon dew point and hydrocarbon content |
| ISO 6975:1997 | Natural gas — Extended analysis — Gas-chromatographic method |
| ISO 6974-3:2000 | Natural gas Determination of composition with defined uncertainty by gas chromatography Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns |
| ISO 15403-1:2006 | Natural gas Natural gas for use as a compressed fuel for vehicles Part 1: Designation of the quality |
| EN ISO 15971:2014 | Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008) |
| EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
| ISO 14532:2014 | Natural gas — Vocabulary |
| EN ISO 6974-2:2012 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| ISO 13443:1996 | Natural gas Standard reference conditions |
| ISO 10101-3:1993 | Natural gas — Determination of water by the Karl Fischer method — Part 3: Coulometric procedure |
| EN ISO 6326-3:1997 | Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989) |
| ISO 6326-1:2007 | Natural gas Determination of sulfur compounds Part 1: General introduction |
| EN ISO 14532:2017 | Natural gas - Vocabulary (ISO 14532:2014) |
| ISO 23874:2006 | Natural gas Gas chromatographic requirements for hydrocarbon dewpoint calculation |
| EN ISO 6975:2005 | Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997) |
| ISO 6974-1:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
| EN 16942:2016 | Fuels - Identification of vehicle compatibility - Graphical expression for consumer information |
| EN ISO 6974-4:2001 | Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:2000) |
| ISO 6326-5:1989 | Natural gas Determination of sulfur compounds Part 5: Lingener combustion method |
| EN ISO 6976:2016 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| EN ISO 10715:2000 | Natural gas - Sampling guidelines (ISO 10715:1997) |
| ISO 6326-3:1989 | Natural gas Determination of sulfur compounds Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry |
| ISO 19739:2004 | Natural gas — Determination of sulfur compounds using gas chromatography |
| ISO 18453:2004 | Natural gas — Correlation between water content and water dew point |
| EN ISO 15403-1:2008 | Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006) |
| ISO 6974-5:2014 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons |
| EN ISO 10101-3:1998 | Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure (ISO 10101-3:1993) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.