DIN EN 15940:2016-09
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
Available format(s)
Hardcopy , PDF
Superseded date
29-08-2018
Superseded by
Language(s)
German, English
Published date
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DevelopmentNote |
Supersedes DIN CEN/TS 15940 & DIN SPEC 53940. (09/2016) DRAFT AMD 1 issued in September 2017. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
39
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 15940:2016 | Identical |
| PREN 15940 : DRAFT 2014 | Identical |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| ISO 13759:1996 | Petroleum products — Determination of alkyl nitrate in diesel fuels — Spectrometric method |
| DIN ISO 91-1:1984-07 | PETROLEUM MEASUREMENT TABLES - PART 1: TABLES BASED ON REFERENCE TEMPERATURES OF 15 DEGREE C AND 60 DEGREE F |
| EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
| CEN/TR 16389:2017 | Automotive fuels - Paraffinic diesel fuel and blends with FAME - Background to the parameters required and their respective limits and determination |
| ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
| ISO 5165:1998 | Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
| ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
| EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| OIML R 63 : 1994 | PETROLEUM MEASUREMENT TABLES |
| EN ISO 12185:1996 | Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
| EN 16715:2015 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| OIML R 120 : 2010 | STANDARD CAPACITY MEASURES FOR TESTING MEASURING SYSTEMS OR LIQUIDS OTHER THAN WATER |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| ISO 12156-1:2016 | Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
| EN ISO 10370:2014 | Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014) |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| EN 15195:2014 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| EN ISO 12205:1996 | Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995) |
| PREN 16906 : DRAFT 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
| EN 14331:2004 | Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method |
| CEN/TR 15367-1:2014 | Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels |
| ISO 10370:2014 | Petroleum products — Determination of carbon residue — Micro method |
| EN ISO 1042:1999 | Laboratory glassware - One-mark volumetric flasks (ISO 1042:1998) |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| EN ISO 3924:2016 | Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2016) |
| ISO 20884:2011 | Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry |
| PREN 16942 : DRAFT 2016 | FUELS - IDENTIFICATION OF VEHICLE COMPATIBILITY - GRAPHICAL EXPRESSION FOR CONSUMER INFORMATION |
| ISO 12205:1995 | Petroleum products — Determination of the oxidation stability of middle-distillate fuels |
| ISO 6245:2001 | Petroleum products — Determination of ash |
| EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| EN 12662:2014 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| EN 16136:2015 | Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| EN ISO 6245:2002 | Petroleum products - Determination of ash (ISO 6245:2001) |
| EN ISO 12937:2000 | Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000) |
| EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
| EN 23015:1994 | Petroleum products - Determination of cloud point (ISO 3015:1992) |
| ISO 91-1:1992 | Petroleum measurement tables Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
| EN ISO 13759:1996 | Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996) |
| ISO 20846:2011 | Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method |
| EN ISO 20884:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011) |
| EN ISO 2160:1998 | Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998) |
| EN ISO 20846:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011) |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
| ISO 3015:1992 | Petroleum products — Determination of cloud point |
| EN ISO 4259:2006 | Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006) |
| ISO 3924:2016 | Petroleum products Determination of boiling range distribution Gas chromatography method |
| EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.