DIN EN 14879-2:2007-02
Current
Current
The latest, up-to-date edition.
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-02-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DevelopmentNote |
Supersedes DIN 28054-1 E, DIN 28054-2 E, DIN 28054-3 E, DIN 28054-4 E and DIN 28054-5 E. (05/2007)
|
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| SN EN 14879-2 : 2007 | Identical |
| BS EN 14879-2:2006 | Identical |
| NBN EN 14879-2 : 2007 | Identical |
| UNI EN 14879-2 : 2007 | Identical |
| UNE-EN 14879-2:2007 | Identical |
| EN 14879-2:2006 | Identical |
| NF EN 14879-2 : 2007 | Identical |
| NS EN 14879-2 : 1ED 2006 | Identical |
| NEN EN 14879-2 : 2006 | Identical |
| I.S. EN 14879-2:2006 | Identical |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| EN 13687-3:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact |
| EN ISO 3001:1999 | Plastics - Epoxy compounds - Determination of epoxy equivalent (ISO 3001:1999) |
| ISO 813:2016 | Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method |
| DIN ISO 8130-2 E : 2005 | COATING POWDERS - PART 2: DETERMINATION OF DENSITY BY GAS COMPARISON PYKNOMETER (REFEREE METHOD) |
| EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| EN 14879-1:2005 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| ISO 3219:1993 | Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
| ISO 3001:1999 | Plastics Epoxy compounds Determination of epoxy equivalent |
| ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
| EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
| EN ISO 4625-1:2006 | Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004) |
| ISO 8130-2:1992 | Coating powders Part 2: Determination of density by gas comparison pyknometer (referee method) |
| DIN 53393:1976-03 | TESTING OF TEXTILE GLASS-REINFORCED PLASTICS; BEHAVIOUR TO THE EFFECT OF CHEMICALS |
| EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
| EN 977:1997 | Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN ISO 2064:2000 | Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| ISO 4625-1:2004 | Binders for paints and varnishes Determination of softening point Part 1: Ring-and-ball method |
| EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| EN ISO 3882:2003 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
| IEC 60167:1964 | Methods of test for the determination of the insulation resistance of solid insulating materials |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| EN ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
| EN ISO 3219:1994 | Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
| ISO 2815:2003 | Paints and varnishes Buchholz indentation test |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| ISO 2559:2011 | Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications |
| EN ISO 2815:2003 | Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| ISO 527-3:1995 | Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
| ISO 1629:2013 | Rubber and latices — Nomenclature |
| DIN ISO 8130-2:2005-04 | COATING POWDERS - PART 2: DETERMINATION OF DENSITY BY GAS COMPARISON PYKNOMETER (REFEREE METHOD) |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| EN ISO 175:2010 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
| ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.