DIN EN 14420-5:2013-09
Current
The latest, up-to-date edition.
HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS
Hardcopy , PDF
English, German
01-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Hose fitting with union nut and clamp fitting
with male pipe thread
5 Dimensions, designations
6 Surface finish
7 Materials
8 Marking
9 Type testing and quality control
Bibliography
Describes requirements for hose fittings with clamp units according to EN 14420-1 with union nut and pipe thread according to EN ISO 228-1 as well as for hose tails according to EN 14420-2 with male pipe thread according to EN ISO 228-1.
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| EN 14420-5:2013 | Identical |
| NF EN 14420-5 : 2013 | Identical |
| UNI EN 14420-5 : 2013 | Identical |
| SN EN 14420-5:2013 | Identical |
| BS EN 14420-5:2013 | Identical |
| NBN EN 14420-5 : 2013 | Identical |
| NS EN 14420-5 : 2013 | Identical |
| NEN EN 14420-5 : 2013 | Identical |
| UNE-EN 14420-5:2014 | Identical |
| I.S. EN 14420-5:2013 | Identical |
| DIN 86210-2:2013-02 | REPLENISHMENT WITH OPERATING MATERIALS AND DISPOSAL OF FLUID WASTE FROM SEAGOING VESSELS - PART 2: EMERGENCY RELEASE COUPLINGS UP TO PN 10 |
| DIN 86210-1:2012-07 | REPLENISHMENT WITH OPERATING MATERIALS AND DISPOSAL OF FLUID WASTE FROM SEAGOING VESSELS - PART 1: HOSE FITTINGS FOR HOSE ASSEMBLIES UP TO PN 10 |
| EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| EN 22768-2:1993 | General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989) |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| EN 10213:2007+A1:2016 | Steel castings for pressure purposes |
| ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
| EN 14420-1:2013 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| EN 10087:1998 | Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN 14420-2:2013 | Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 10283:2010 | Corrosion resistant steel castings |
| EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 12420:2014 | Copper and copper alloys - Forgings |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.