DIN EN 14267:2004-10
Current
The latest, up-to-date edition.
IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS
Hardcopy , PDF
01-01-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
4.1 By function
4.2 By dimension
4.3 By PN
4.4 By flow-rate limiter class
5 Quality of irrigation waters
5.1 General
5.2 Water quality 1a
5.3 Water quality 1b
5.4 Water quality 1c
5.5 Water quality 2
6 Requirements
6.1 Dimensional hydrant specifications
6.2 Requirements for total head loss in the hydrant
6.3 Conception requirement
7 Connection to the user network
7.1 Connection piece
7.2 Closure of the connection piece
7.3 Decompression valve
7.4 Protection device
8 Testing and inspection methods
8.1 Resistance to internal pressure of casing and all components
subjected to pressure
8.2 Tightness and hydraulic or air characteristics
8.3 Verification of the manoeuvring torque
8.4 Measurement of total head loss
8.5 Pressure ram test
8.6 Performance of the pressure regulator
8.7 Flow-rate limiter performances
8.8 Performance of meters
8.9 Measurement and test apparatus
8.10 Endurance test of the stopper device
9 Marking
9.1 General
9.2 Of meters
9.3 Of hydrant bodies
9.4 Of outlets
10 Designation
Annex A (informative) Irrigation hydrant - Example of technical data
sheet (responsibility of the manufacturer)
A.1 Identification of the hydrant
A.2 Hydrant body
A.3 Outlets
A.4 Particular functions
A.5 Methods of use
Bibliography
This standard is included in DIN Handbook 187. Applies to irrigation hydrants intended to supply equipment for use in water distribution irrigation networks.
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN 14267 : 2004 COR 2008 | Identical |
| NEN EN 14267 : 2004 C1 2008 | Identical |
| NS EN 14267 : 2004 AC 2008 | Identical |
| I.S. EN 14267:2004 | Identical |
| SN EN 14267 : 2004 CORR 2009 | Identical |
| UNI EN 14267 : 2006 | Identical |
| UNE-EN 14267:2005 V2 | Identical |
| BS EN 14267:2004 | Identical |
| NF EN 14267 : 2004 | Identical |
| EN ISO 4628-1:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2016) |
| EN 805:2000 | Water supply - Requirements for systems and components outside buildings |
| EN 1074-5:2001 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| ISO 4064-3:2014 | Water meters for cold potable water and hot water — Part 3: Test report format |
| EN 1074-1:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| EN 764 : 1994 | PRESSURE EQUIPMENT - TERMINOLOGY AND SYMBOLS - PRESSURE, TEMPERATURE, VOLUME |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 4628-1:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| EN 1333:2006 | Flanges and their joints - Pipework components - Definition and selection of PN |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| EN 19:2016 | Industrial valves - Marking of metallic valves |
| EN 1267:2012 | Industrial valves - Test of flow resistance using water as test fluid |
| ISO 4064-1:2014 | Water meters for cold potable water and hot water Part 1: Metrological and technical requirements |
| ISO 9635:1990 | Irrigation equipment — Hydraulically operated irrigation valves |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 1561:2011 | Founding - Grey cast irons |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.