DIN EN 14035-3:2004-11
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS
Hardcopy , PDF
01-12-2010
English
12-01-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
4.1 Means of ignition
4.2 Attachment of protruding fuse
4.3 Protection of initial fuse
4.3.1 General
4.3.2 Initial fuse protected by fuse cover
4.3.3 Initial fuse protected by primary pack
4.3.4 Protruding fuse designed to resist side
ignition
4.4 Materials of firework case
4.5 Integrity
4.6 Net explosive content
5 Performance
5.1 Initial fuse
5.2 Principal effects
5.3 Functioning
5.4 Height of explosions
5.5 Stabilization of flight
5.6 Sound pressure level
5.7 Burning matter
5.8 Angle of ascent
5.9 Projected debris
5.10 Mass of debris
6 Primary pack
7 Minimum labelling requirements
7.1 General
7.2 Type name and category
7.3 Safety information
7.3.1 General
7.3.2 Aerial wheels
7.3.3 Identification of top side
7.4 Name, address and telephone number of manufacturer
or distributor or importer
7.5 Reference to this standard
7.6 Printing
7.6.1 Labelling
7.6.2 Type size
7.7 Additional information on the primary pack (if
applicable)
8 Test methods
8.1 Attachment of protruding fuse (type test and batch
test)
8.1.1 Apparatus
8.1.2 Procedure
8.2 Performance (type test and batch test)
8.2.1 Test environment
8.2.2 Apparatus
8.2.3 Procedure
8.3 Determination of net explosive content (type test)
8.3.1 Apparatus
8.3.2 Procedure
8.4 Side ignition of initial fuse (type test)
8.4.1 Material
8.4.2 Test area
8.4.3 Apparatus
8.4.4 Test specimen
8.4.5 Procedure
8.5 Labelling (type test and batch test)
Annex A (normative) Type testing
Annex B (normative) Batch testing
Annex C (normative) Method for determination of smouldering
rate of cigarette
Annex D (informative) A-Deviations
Defines requirements for the construction, performance, primary packaging and labelling of aerial wheels and the corresponding test methods.
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| EN 14035-3:2004 | Identical |
| IEC 61672-2:2013+AMD1:2017 CSV | Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests |
| EN 61672-2:2013/A1:2017 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017) |
| ISO 845:2006 | Cellular plastics and rubbers — Determination of apparent density |
| EN ISO 845:2009 | Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006) |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| ISO 2439:2008 | Flexible cellular polymeric materials Determination of hardness (indentation technique) |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 2439:2008 | Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.