DIN EN 13411-5:2009-02
Current
The latest, up-to-date edition.
TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
Hardcopy , PDF
English, German
01-01-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of hazards
5 Safety requirements and/or measures
5.1 Materials
5.2 Mechanical properties
6 Verification of safety requirements
6.1 Qualification of personnel
6.2 Type testing
7 Information for use
7.1 Identification marking
7.2 Fitting instructions
7.3 Certificate
Annex A (informative) - Specification for construction and sizes
for one design of grip - 1
A.1 General
A.2 Material
A.3 Dimensions
A.4 Fitting instructions
Annex B (informative) - Specification for construction and sizes
for one design of grip - 2
B.1 General
B.2 Material
B.3 Dimensions
B.4 Fitting instructions
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Defines the minimum requirements for U-bolt wire rope grips manufactured from ferrous materials and the safe behaviour of eye terminations secured by U-bolt wire rope grips for use as intended by the manufacturer.
| DevelopmentNote |
Supersedes DIN 1142 E. (12/2003)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 13411-5 : 2003 + A1 2008 | Identical |
| I.S. EN 13411-5:2003 | Identical |
| NF EN 13411-5 : 2003 + A1 2008 | Identical |
| UNI EN 13411-5 : 2009 | Identical |
| NEN EN 13411-5 : 2003 + A1 2008 | Identical |
| BS EN 13411-5 : 2003 | Identical |
| EN 13411-5:2003+A1:2008 | Identical |
| SN EN 13411-5 : 2003 + A1 2009 | Identical |
| NBN EN 13411-5 : 2003 + A1 2009 | Identical |
| UNE-EN 13411-5:2004 | Identical |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| EN 12385-2:2002+A1:2008 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
| EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| EN 1562:2012 | Founding - Malleable cast irons |
| ISO 5922:2005 | Malleable cast iron |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 20898-2 : 1993 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
| ASTM A 563 : 2015 : REDLINE | Standard Specification for Carbon and Alloy Steel Nuts |
| EN 1677-1:2000+A1:2008 | Components for slings - Safety - Part 1: Forged steel components, Grade 8 |
| EN ISO 4759-1:2000 | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000) |
| EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
| EN 12329 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| ISO 8062:1994 | Castings System of dimensional tolerances and machining allowances |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.