DIN EN 1338:2003-08
Current
The latest, up-to-date edition.
CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
01-08-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for materials
4.1 General
4.2 Asbestos
5 Requirements for products
5.1 General
5.2 Shape and dimensions
5.3 Physical and mechanical properties
5.4 Visual aspects
6 Evaluation of conformity criteria
6.1 General
6.2 Type testing of the product
6.3 Factory production control
7 Marking
8 Test report
Annex A (informative) - Inspection schemes
Annex B (normative) - Procedure for acceptance testing of a
consignment at delivery
Annex C (normative) - Measurement of the dimensions of a single
Block
Annex D (normative) - Determination of freeze/thaw resistance
with de-icing salt
Annex E (normative) - Determination of total water absorption
Annex F (normative) - Measurement of strength
Annex G (normative) - Measurement of abrasion resistance
Annex H (normative) - Measuring of abrasion according to the
Boehme test
Annex I (normative) - Method for the determination of unpolished
slip resistance value (USRV)
Annex J (normative) - Verification of visual aspects
Annex K (informative) - Example of the application of the method
for checking conformity of tensile splitting
strength by variables (6.3.8.3.B)
Annex ZA (informative) - Clauses of this European Standard addressing
the provisions of the EU Construction
Products Directive (89/106/EEC)
Specifies materials, properties, requirements and test methods for unreinforced cement bound concrete paving blocks and complementary fittings. Applies to precast concrete paving blocks and complementary fitting for pedestrian use, vehicular use and roof coverings.
| DevelopmentNote |
Supersedes DIN 18501 E (12/2003)
|
| DocumentType |
Standard
|
| Pages |
66
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| ONORM EN 1338 : 2007 | Identical |
| UNE-EN 1338:2004 | Identical |
| I.S. EN 1338:2003 | Identical |
| NF EN 1338 : 2004 | Identical |
| SN EN 1338 : 2003 + CORR 2007 | Identical |
| NBN EN 1338 : 2003 | Identical |
| UNI EN 1338 : 2004 | Identical |
| BS EN 1338:2003 | Identical |
| NS EN 1338 : 1ED 2003 | Identical |
| NEN EN 1338 : 2003 C1 2006 | Identical |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 7873:1993 | Control charts for arithmetic average with warning limits |
| EN ISO 4288:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| ISO 4662:2017 | Rubber, vulcanized or thermoplastic Determination of rebound resilience |
| ISO 8486-1:1996 | Bonded abrasives Determination and designation of grain size distribution Part 1: Macrogrits F4 to F220 |
| EN ISO 6506-3:2014 | Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014) |
| ISO 7619:1997 | Rubber Determination of indentation hardness by means of pocket hardness meters |
| ISO 7966:1993 | Acceptance control charts |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.