DIN EN 13168:2015-04
Current
Current
The latest, up-to-date edition.
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION
Available format(s)
Hardcopy , PDF
Language(s)
German, English
Published date
01-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and
abbreviated terms
4 Requirements
5 Test methods
6 Designation code
7 Assessment and Verification of the
Constancy of Performance (AVCP)
8 Marking and labelling
Annex A (normative) - Determination of the
declared values of thermal resistance
and thermal conductivity
Annex B (normative) - Product type determination
(PTD) and factory production control (FPC)
Annex C (normative) - WW multi-layered insulation
products
Annex D (normative) - Specific test methods
Annex E (normative) - Determination of the thermal
conductivity in relation to moisture content
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the
EU Construction Products Regulation
Bibliography
This standard is included in DIN Handbook 308 and 456/3.
| DevelopmentNote |
Partially supersedes DIN 1101. (02/2003)
|
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 13168 : 2013 + A1 2015 | Identical |
| NBN EN 13168 : 2013 + A1 2015 | Identical |
| NEN EN 13168 : 2012 + A1 2015 | Identical |
| I.S. EN 13168:2012 | Identical |
| SN EN 13168 : 2012 + A1 2015 | Identical |
| EN 13168:2012+A1:2015 | Identical |
| UNI EN 13168 : 2013 | Identical |
| BS EN 13168 : 2012 | Identical |
| NS EN 13168 : 2012 + A1 2015 | Identical |
| UNE-EN 13168:2013 | Identical |
| DIN V 4108-4:2007-06 | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
| DIN 4108-4:2016-07 (Draft) | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
| DIN 4108-3:2014-11 | THERMAL PROTECTION AND ENERGY ECONOMY IN BUILDINGS - PART 3: PROTECTION AGAINST MOISTURE SUBJECT TO CLIMATE CONDITIONS - REQUIREMENTS AND DIRECTIONS FOR DESIGN AND CONSTRUCTION |
| DIN 18330:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - MASONRY WORK |
| DIN 18345:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - THERMAL INSULATION COMPOSITE SYSTEMS |
| DIN 68800-2:2012-02 | Wood preservation - Part 2: Preventive constructional measures in buildings |
| DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
| DIN 4109-33:2016-07 | SOUND INSULATION IN BUILDINGS - PART 33: DATA FOR VERIFICATION OF SOUND INSULATION (COMPONENT CATALOGUE) - TIMBER CONSTRUCTION, LIGHTWEIGHT CONSTRUCTION AND DRY WALLING |
| ISO 9229:2007 | Thermal insulation Vocabulary |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| EN 1607:2013 | Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| EN 13820:2003 | Thermal insulating materials for building applications - Determination of organic content |
| EN 1606:2013 | Thermal insulating products for building applications - Determination of compressive creep |
| EN 12939:2000 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN ISO 9229:2007 | Thermal insulation - Vocabulary (ISO 9229:2007) |
| EN 1605:2013 | Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions |
| EN 824:2013 | Thermal insulating products for building applications - Determination of squareness |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN 825:2013 | Thermal insulating products for building applications - Determination of flatness |
| EN 823:2013 | Thermal insulating products for building applications - Determination of thickness |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 1602:2013 | Thermal insulating products for building applications - Determination of the apparent density |
| ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
| EN 12090:2013 | Thermal insulating products for building applications - Determination of shear behaviour |
| ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
| EN 1604:2013 | Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| EN 12430:2013 | Thermal insulating products for building applications - Determination of behaviour under point load |
| EN 1609:2013 | Thermal insulating products for building applications - Determination of short term water absorption by partial immersion |
| EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
| EN 15715:2009 | Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
| EN 12086:2013 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
| EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
| EN 14303:2015 | Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
| EN 822:2013 | Thermal insulating products for building applications - Determination of length and width |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.