DIN EN 13102:2009-05
Current
The latest, up-to-date edition.
CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
Hardcopy , PDF
English, German
01-01-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe - Symbole und Abkürzungen
4 Liste der signifikanten Gefährdungen
5 Sicherheitsanforderungen und/oder
Schutzmassnahmen
5.1 Allgemeines
5.2 Zugang unter vertikal bewegte Teile
5.3 Bewegungen mittels Vakuum-Hebegerät
5.4 Stapelautomat
5.5 Beladen von Containern durch Rollenförderer
5.6 Bewegen von Containern
5.7 Für Personen zugängliche Plattformen
5.8 Stolpern und Fallen
5.9 Säuberung
6 Feststellung der Übereinstimmung mit den
Sicherheitsanforderungen und/oder
Schutzmassnahmen
7 Benutzerinformationen
7.1 Allgemeines
7.2 Signale und Warneinrichtungen
7.3 Begleitende Dokumente (insbesondere
Betriebsanleitung)
7.4 Kennzeichnung
Anhang A (informativ) Beispiele von
Belade-/Entlademaschinen
Anhang ZA (informativ) Zusammenhang zwischen
dieser Europäischen Norm und den
grundlegenden Anforderungen der
EG-Richtlinie 98/37/EG
Anhang ZB (informativ) Zusammenhang zwischen
dieser Europäischen Norm und den
grundlegenden Anforderungen der
EG-Richtlinie 2006/42/EG
Bilder
Tabellen
Specifies: - machines for stacking or dehacking fired or unfired fine clay wall tiles and floor tiles on/from fixed or movable supports. - machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles into/from containers. - machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles on/from stackable frames.
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 13102 : 2005 | Identical |
| NF EN 13102 : 2006 + A1 2009 | Identical |
| NBN EN 13102 : 2006 + A1 2009 | Identical |
| EN 13102:2005+A1:2008 | Identical |
| NEN EN 13102 : 2006 + A1 2008 | Identical |
| UNE-EN 13102:2006 | Identical |
| SN EN 13102 : 2006 + A1 2009 | Identical |
| NS EN 13102 : 2005 + A1 2008 | Identical |
| UNI EN 13102 : 2009 | Identical |
| I.S. EN 13102:2006 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| EN 1525:1997 | Safety of industrial trucks - Driverless trucks and their systems |
| EN 999:1998+A1:2008 | Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
| EN 619:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.