DIN EN 12195-1:2011-06
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES
Hardcopy , PDF
07-03-2021
German, English
01-01-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and abbreviations
3.1 General terms and definitions
3.2 Definition of calculation parameters
3.3 Symbols, units and terms
4 Acceleration coefficients
4.1 General
4.2 Load on lorries and trailers during road transport
4.3 Load on lorries and trailers during rail transport
4.4 Load on lorries and trailers during sea transport
5 Methods of calculation
5.1 General
5.2 Stability of an unlashed load
5.3 Blocking
5.4 Over top lashing
5.5 Direct lashing
6 Parameters
6.1 Friction factor
6.2 Transmission of force during frictional lashing
7 Instructions for use
8 Marking
Annex A (informative) Examples for the calculation of
lashing forces
Annex B (informative) Dynamic friction factors of some usual
goods mu[D]
Annex C (informative) Static friction factors of some usual
goods mu[S]
Annex D (informative) Table D.1 - Example for a load securing
docket (no copyright)
Pertains to the design of securing methods (blocking, lashing, and combinations) for securing of loads for surface transport by road vehicles or parts of them (lorries, trailers, containers and swap bodies), including their transport on vessels or by rail and/or combinations thereof.
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN 12195-1 : 2011 | Identical |
| UNE-EN 12195-1:2011 | Identical |
| NBN EN 12195-1 : 2010 COR 2014 | Identical |
| NEN EN 12195-1 : 2010 C2 2014 | Identical |
| NS EN 12195-1 : 2010 AC 2014 | Identical |
| I.S. EN 12195-1:2010 | Identical |
| SN EN 12195-1 : 2011 CORR 2014 | Identical |
| UNI EN 12195-1 : 2010 | Identical |
| BS EN 12195-1:2010 | Identical |
| PREN 12195-1 : DRAFT 1995 | Identical |
| VDI 4085:2017-04 | Planning, construction and managing of scrapyards - Facilities and equipment for the handling, storage and treatment of scraps and other materials |
| VDI 2700 Blatt 16:2009-07 | Securing of loads on road vehicles - Securing of loads on transporter up to a total mass of 7,5 t |
| VDI 2700 Blatt 3.3:2013-05 | Securing of loads on road vehicles - Cargo nets for load securing |
| VDI 2700 Blatt 17:2009-04 | Securing of loads on road vehicles - Securing of skips on skip loader vehicles and their trailers |
| VDI 3968 Blatt 1:2013-04 | Securing of load units - Specification of requirements |
| VDI 2700 Blatt 5:2011-12 | Securing of loads on road vehicles - Quality management systems |
| VDI 2700:2004-11 | Securing of loads on road vehicles |
| VDI 2700 Blatt 7:2014-07 | Securing of loads on road vehicles - Safety of loads in combined transport |
| VDI 2700 Blatt 11:2006-10 | Securing of loads on road vehicles - Securing of reinforcing steel |
| VDI 2700 Blatt 3.1:2006-10 | Securing of loads on road vehicles - Instruction manual for lashings |
| VDI 2700 Blatt 8.1:2009-04 | Securing of loads on road vehicles - Securing of passenger cars and cargo minivans on vehicle transporters |
| VDI 2700 Blatt 12:2009-01 | Securing of loads on road vehicles - Securing of beverage products |
| VDI 2700 Blatt 8.2:2010-12 | Securing of loads on road vehicles - Securing of trucks on vehicle transporters |
| VDI 2700 Blatt 6:2006-10 | Securing of loads on road vehicles - Part-load consignment |
| VDI 2700 Blatt 3.2:2006-09 | Securing of loads on road vehicles - Vehicles equipments and securing aids for load |
| DGUV INFORMATION 213-052 : 2016 |
| EN 12642:2016 | Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements |
| EN ISO 2233:2001 | Packaging - Complete, filled transport packages and unit loads - Conditioning for testing (ISO 2233:2000) |
| EN 12195-3:2001 | Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains |
| EN 12195-2:2000 | Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres |
| ISO 2233:2000 | Packaging Complete, filled transport packages and unit loads Conditioning for testing |
| EN 12195-4:2003 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| EN 283:1991 | Swap bodies - Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.