DIN EN 1208:2005-06
Current
The latest, up-to-date edition.
CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CALCIUM POLYPHOSPHATE
Hardcopy , PDF
English
01-01-2005
Foreword
Introduction
1 Scope
2 Normative references
3 Description
3.1 Identification
3.2 Commercial form
3.3 Physical properties
3.4 Chemical properties
4 Purity criteria
4.1 Composition of commercial product
4.2 Impurities and main by-products
4.3 Toxic substances
5 Test methods
5.1 Sampling
5.2 Analyses
6 Labelling, transportation, storage
6.1 Means of delivery
6.2 Risk and safety labelling according to the
EU Directives
6.3 Transportation regulations and labelling
6.4 Marking
6.5 Storage
Annexes
A (informative) General information on sodium calcium
polyphosphate
B (informative) Bibliography
Applies to sodium calcium polyphosphate used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements and the corresponding test methods for sodium calcium polyphosphate. Gives information on its use in water treatment.
DocumentType |
Standard
|
Pages |
15
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
UNI EN 1208 : 2005 | Identical |
NS EN 1208 : 2ED 2005 | Identical |
NEN EN 1208 : 2005 | Identical |
I.S. EN 1208:2005 | Identical |
UNE-EN 1208:2006 | Identical |
EN 1208:2005 | Identical |
NBN EN 1208 : 2005 | Identical |
NF EN 1208 : 2005 | Identical |
BS EN 1208:2005 | Identical |
SN EN 1208 : 2005 | Identical |
ISO 3165:1976 | Sampling of chemical products for industrial use — Safety in sampling |
EN 1483:2007 | Water quality - Determination of mercury - Method using atomic absorption spectrometry |
EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
ISO 11969:1996 | Water quality Determination of arsenic Atomic absorption spectrometric method (hydride technique) |
ISO 3360:1976 | Phosphoric acid and sodium phosphates for industrial use (including foodstuffs) — Determination of fluorine content — Alizarin complexone and lanthanum nitrate photometric method |
EN ISO 5961:1995 | Water quality - Determination of cadmium by atomic absorption spectrometry (ISO 5961:1994) |
ISO 5961:1994 | Water quality Determination of cadmium by atomic absorption spectrometry |
ISO 9965:1993 | Water quality Determination of selenium Atomic absorption spectrometric method (hydride technique) |
ISO 9174:1998 | Water quality — Determination of chromium — Atomic absorption spectrometric methods |
ISO 8288:1986 | Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods |
ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
ISO 5373:1981 | Condensed phosphates for industrial use (including foodstuffs) — Determination of calcium content — Flame atomic absorption spectrometric method |
ISO 6703-1:1984 | Water quality — Determination of cyanide — Part 1: Determination of total cyanide |
ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
ISO 6206:1979 | Chemical products for industrial use — Sampling — Vocabulary |
ISO 3357:1975 | Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of total phosphorus(V) oxide content — Quinoline phosphomolybdate gravimetric method |
ISO 8213:1986 | Chemical products for industrial use — Sampling techniques — Solid chemical products in the form of particles varying from powders to coarse lumps |
DIN 38405-13:2011-04 | German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 13: Determination of cyanides (D 13) |
EN ISO 11969:1996 | Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996) |
DIN ISO 3696:1991-06 | WATER FOR ANALYTICAL LABORATORY USE - SPECIFICATION AND TEST METHODS |
ISO 2997:1974 | Phosphoric acid for industrial use — Determination of sulphate content — Method by reduction and titrimetry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.