DIN EN 1097-2:2016-07 (Draft)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
Hardcopy , PDF
12-06-2020
German
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Definitions
4 Apparatus
5 Determination of resistance to fragmentation by the
Los Angeles test method
5.1 Principle
5.2 Preparation of the sample for testing
5.3 Test procedure
5.4 Calculation and expression of results
5.5 Test report
6 Determination of resistance to fragmentation by the
impact test method
6.1 Principle
6.2 Preparation of the sample for testing
6.3 Test procedure
6.4 Calculation and expression of results
6.5 Test report
Annex A (informative) Alternative narrow range
classifications
Annex B (informative) The impact tester, constructional,
operational and safety requirements
Annex C (informative) Checking of the impact tester
Annex D (informative) Precision
Annex E (informative) Worked example of calculation of
impact value, SZ
Annex F (informative) Bibliography
This standard is included in DIN HDBK 358/2.
| DevelopmentNote |
Supersedes DIN 52115-1 and -3. (11/1999) DRAFT 2018 issued in February 2018. (02/2018)
|
| DocumentType |
Draft
|
| Pages |
90
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| ONORM EN 1097-2 : 2010 | Identical |
| UNE-EN 1097-2:2010 | Identical |
| NF EN 1097-2 : 2010 | Identical |
| EN 1097-2:2010 | Identical |
| SN EN 1097-2 : 2010 | Identical |
| NBN EN 1097-2 : 2010 | Identical |
| NS EN 1097-2 : 2010 | Identical |
| BS EN 1097-2:2010 | Identical |
| UNI EN 1097-2 : 2010 | Identical |
| NEN EN 1097-2 : 2010 | Identical |
| I.S. EN 1097-2:2010 | Identical |
| DIN 4226-1:2001-07 | AGGREGATES FOR CONCRETE AND MORTAR - PART 1: NORMAL AND HEAVY-WEIGHT AGGREGATES |
| DIN 18035-6:2014-12 | Sports ground - Part 6: Synthetic surfaces |
| DIN 4301:2009-06 | Ferrous and non-ferrous slag for civil engineering |
| DIN HDBK 358/2 : 3ED 2014 | GESTEINSKOERNUNGEN, WASSERBAUSTEINE, GLEISSCHOTTER, FUELLER - PRUEFMETHODEN |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 932-2:1999 | Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples |
| DIN 52115-2:2014-02 | TEST METHODS FOR AGGREGATES - PART 2: IMPACT TEST ON CRUSHED AND BROKEN AGGREGATES LARGER THAN 32 MM |
| ISO 1874-1:2010 | Plastics Polyamide (PA) moulding and extrusion materials Part 1: Designation system and basis for specification |
| DIN ISO 5725-2:2002-12 | Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| DIN EN ISO 1874-1:2011-03 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATION |
| DIN ISO 3302-1:2016-10 (Draft) | RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES |
| ISO 4957:1999 | Tool steels |
| EN 933-2:1995 | Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures |
| DIN ISO 8062:1998-08 | CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES |
| EN ISO 4957:1999 | Tool steels (ISO 4957:1999) |
| DIN ISO 48:2016-09 | Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010) |
| ISO 4762:2004 | Hexagon socket head cap screws |
| ISO 3302-1:2014 | Rubber — Tolerances for products — Part 1: Dimensional tolerances |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| ISO 683-11:2012 | Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels |
| ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| ISO 185:2005 | Grey cast irons Classification |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 8062:1994 | Castings System of dimensional tolerances and machining allowances |
| EN 932-1:1996 | Tests for general properties of aggregates - Part 1: Methods for sampling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.