DIN EN 10253-4:2008-06
Current
Current
The latest, up-to-date edition.
BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
Available format(s)
Hardcopy , PDF
Published date
01-06-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Symbole
5 Sorteneinteilung und Bezeichnung
6 Bestellangaben
7 Festigkeit gegen Innendruck
8 Herstellungsverfahren
9 Technische Anforderungen
10 Äusseres Erscheinungsbild und innere Beschaffenheit
11 Masse und Grenzabmasse
12 Prüfung
13 Probenahme
14 Prüfverfahren
15 Kennzeichnung
16 Vorbereitung zum Versand und Verpackung
Anhang A (normativ) Baumasse der Formstücke
Anhang B (normativ) Bestimmung des Ausnutzungsgrades
und der Wanddicke
Anhang C (normativ) Tabellen für den Ausnutzungsgrad für
Formstücke der Bauart A
Anhang D (informativ) Wanddicken für Formstücke der
Bauart B
Anhang ZA (informativ)
Literaturhinweise
This standard is included in DIN Handbook 62-1, 384 and 384/1.
| Committee |
ECISS/TC 29
|
| DevelopmentNote |
Supersedes DIN 2605-1, DIN 2605-2, DIN 2609, DIN 2615-1, DIN 2615-2, DIN 2616-1, DIN 2616-2 and DIN 2617. (06/2008) DRAFT 2017 issued in November 2017. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
110
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 10253-4 : 2008 C1 2009 | Identical |
| NF EN 10253-4 : 2009 | Identical |
| BS EN 10253-4:2008 | Identical |
| DIN 2827:2006-07 | HOSE ASSEMBLIES OF STAINLESS STEEL FOR CHEMICAL PRODUCTS |
| DIN 21057-11:2015-07 (Draft) | PIPE CLASSES FOR PROCESS PLANTS - PART 11: TECHNICAL DELIVERY CONDITIONS FOR PIPE COMPONENTS OF AUSTENITIC STAINLESS STEELS OF MATERIAL GROUP 8.1 |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| DIN HDBK 62-1 : 8ED 2010 | WASSERVERSORGUNG 2 - GUSS-, STAHLBETON- UND STAHLROHRE FUER WASSERLEITUNGEN |
| DIN 21057-12:2015-07 (Draft) | PIPE CLASSES FOR PROCESS PLANTS - PART 12: TECHNICAL DELIVERY CONDITIONS FOR PIPE COMPONENTS OF NON ALLOYED AND ALLOYED STEEL WITH SPECIFIED PROPERTIES AT ELEVATED TEMPERATURES OF MATERIAL GROUP 1.2 AND 5.1 |
| KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
| KTA 3201.2 : 2013 | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 2: DESIGN AND ANALYSIS |
| DIN 28011:2012-06 | TOROSPHERICAL HEADS |
| DIN HDBK 384/1 : 2ED 2010 | ROHRVERLEGERICHTLINIE - BAUTEILE, FLANSCHE, FORMSTUECKE, AUSRUESTUNGSTEILE |
| DIN 19643-1:2012-11 | Treatment of water of swimming pools and baths - Part 1: General requirements |
| KTA 3702 : 2014(R2017) | EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS |
| DIN HDBK 384 : 3ED 2015 | VERLEGERRICHTLINIE FUER ROHRLEITUNGEN IM CHEMISCHEN UND PHARMAZEUTISCHEN ANLAGENBAU |
| DIN 28013:2012-06 | ELLIPSOIDAL HEADS |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN ISO 8493:2004 | Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| EN 10002-5:1991 | Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| ISO 8493:1998 | Metallic materials Tube Drift-expanding test |
| EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| EN 13480-3:2017 | Metallic industrial piping - Part 3: Design and calculation |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 5251:1981 | Stainless steel butt-welding fittings |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| ISO 3419:1981 | Non-alloy and alloy steel butt-welding fittings |
| ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
| EN 10020:2000 | Definition and classification of grades of steel |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.