DIN EN 10245-1:2012-01
Current
Current
The latest, up-to-date edition.
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
Available format(s)
Hardcopy , PDF
Language(s)
English, German
Published date
01-01-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements and testing methods for the
organic coating material
5 Requirements and testing methods for the
organic coating on wire
6 Performance tests for the organic coating
7 Retests
8 Inspection and Quality assurance
Bibliography
Defines the requirements for the characteristics and testing methods for organic coatings made of organic coating material suitable for the application on to steel wire and wire products of circular or other sections.
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| UNI EN 10245-1 : 2011 | Identical |
| SN EN 10245-1 : 2012 | Identical |
| NEN EN 10245-1 : 2011 | Identical |
| EN 10245-1:2011 | Identical |
| I.S. EN 10245-1:2011 | Identical |
| BS EN 10245-1:2011 | Identical |
| NF EN 10245-1 : 2011 | Identical |
| NS EN 10245-1 : 2011 | Identical |
| UNE-EN 10245-1:2012 | Identical |
| NBN EN 10245-1 : 2011 | Identical |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
| BS 2782-3:Methods 320A to 320F:1976 | Methods of testing plastics. Mechanical properties Tensile strength, elongation and elastic modulus |
| EN 10245-2:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| ISO 6272-2:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter |
| EN 10245-4:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| EN ISO 1183-3:1999 | Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999) |
| ISO 527-4:1997 | Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| ISO 2809:1976 | Paints and varnishes — Determination of light fastness of paints for interior use |
| ISO 6270-2:2005 | Paints and varnishes Determination of resistance to humidity Part 2: Procedure for exposing test specimens in condensation-water atmospheres |
| ISO 1512:1991 | Paints and varnishes Sampling of products in liquid or paste form |
| EN 10218-2:2012 | Steel wire and wire products - General - Part 2: Wire dimensions and tolerances |
| EN ISO 4892-1:2016 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| ISO 2811-3:2011 | Paints and varnishes — Determination of density — Part 3: Oscillation method |
| EN ISO 3668:2001 | Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998) |
| EN ISO 527-4:1997 | Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997) |
| EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| ISO 6270-1:1998 | Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| EN 10245-3:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
| ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
| ISO 3668:2017 | Paints and varnishes — Visual comparison of colour of paints |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| EN ISO 2811-3:2011 | Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011) |
| EN 10245-5:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| EN ISO 6988:1994 | Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985) |
| ISO 527-5:2009 | Plastics Determination of tensile properties Part 5: Test conditions for unidirectional fibre-reinforced plastic composites |
| ISO 105-A08:2001 | Textiles — Tests for colour fastness — Part A08: Vocabulary used in colour measurement |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 1183-2:2004 | Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method |
| ISO 1183-3:1999 | Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method |
| EN ISO 527-5:2009 | Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009) |
| ISO 4582:2017 | Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 2811-4:2011 | Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
| ISO 6272-1:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO 2811-4:2011 | Paints and varnishes Determination of density Part 4: Pressure cup method |
| EN 50395 : 2005 AMD 1 2011 | ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES |
| EN ISO 6272-2:2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
| EN ISO 105-A08:2002 | Textiles - Tests for colour fastness - Part A08: Vocabulary used in colour measurement (ISO 105-A08:2001) |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| ISO 527-3:1995 | Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| ISO 6988:1985 | Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture |
| EN 50396 : 2005 AMD 1 2011 | NON ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES |
| EN ISO 6272-1:2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| EN ISO 1183-2:2004 | Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004) |
| EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.