DIN EN 10107:2014-07
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Grain-oriented electrical steel strip and sheet delivered in the fully processed state
Hardcopy , PDF
26-10-2022
German
01-07-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
5 Information to be supplied by the
purchaser
6 General requirements
7 Technical requirements
8 Inspection and testing
9 Marking, labelling and packaging
10 Complaints
Annex A (informative) - Maximum specific total
loss at 60 Hz and 1,7 T
Bibliography
Describes the steel grades of grain-oriented electrical strip and sheet in nominal thicknesses of 0,23 mm, 0,27 mm, 0,30 mm and 0,35 mm and specifies in particular, general requirements, magnetic properties, geometric characteristics and tolerances and technological characteristics, as well as inspection procedures.
| DevelopmentNote |
Supersedes DIN 46400-3 (07/2002)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 10107 : 2014 | Identical |
| NEN EN 10107 : 2014 | Identical |
| SN EN 10107 : 2014 | Identical |
| NS EN 10107 : 2014 | Identical |
| EN 10107:2014 | Identical |
| UNI EN 10107 : 2014 | Identical |
| NBN EN 10107 : 2014 | Identical |
| BS EN 10107:2014 | Identical |
| I.S. EN 10107:2014 | Identical |
| UNE-EN 10107:2014 | Identical |
| NF EN 10107 : 2014 | Identical |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10280:2001+A1:2007 | Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester |
| IEC 60050-221:1990 | International Electrotechnical Vocabulary (IEV) - Part 221: Magnetic materials and components |
| ISO 7799:1985 | Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test |
| EN ISO 7799:2000 | Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 60404-2:1998/A1:2008 | MAGNETIC MATERIALS - PART 2: METHODS OF MEASUREMENT OF THE MAGNETIC PROPERTIES OF ELECTRICAL STEEL STRIP AND SHEET BY MEANS OF AN EPSTEIN FRAME |
| EN 10282:2001 | Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 60404-13 : 2007 | MAGNETIC MATERIALS - PART 13: METHODS OF MEASUREMENT OF DENSITY, RESISTIVITY AND STACKING FACTOR OF ELECTRICAL STEEL SHEET AND STRIP |
| EN 10251:1997 | Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip |
| IEC 60050-121:1998 | International Electrotechnical Vocabulary (IEV) - Part 121: Electromagnetism |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10342:2005 | Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations |
| IEC 60404-1:2016 | Magnetic materials - Part 1: Classification |
| IEC 60404-11:1991+AMD1:1998+AMD2:2012 CSV | Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip |
| IEC 60404-2:1996+AMD1:2008 CSV | Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame |
| EN 60404-11:2013 | Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip |
| IEC 60404-13:1995 | Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip |
| IEC 60404-3:1992+AMD1:2002+AMD2:2009 CSV | Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.