DIN 8078:2008-09
Current
Current
The latest, up-to-date edition.
POLYPROPYLENE (PP) PIPES - PP-H, PP-B, PP-R, PP-RCT - GENERAL QUALITY REQUIREMENTS AND TESTING
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Werkstoff
3.1 Allgemeines
3.2 Nachweis der Zeitstand-Innendruckfestigkeit
4 Anforderungen
4.1 Lieferzustand
4.2 Oberflächenbeschaffenheit
4.3 Masse und Grenzabmasse
4.4 Festigkeitseigenschaften beim Zeitstand-Innendruckversuch
4.5 Verhalten beim Schlagbiegeversuch (Attributprüfung)
4.6 Veränderungen nach Wärmebehandlung
5 Prüfung
5.1 Oberflächenbeschaffenheit
5.2 Masse
5.3 Ovalität (Unrundheit)
5.4 Zeitstand-Innendruckversuch
5.5 Verhalten beim Schlagbiegeversuch (Attributprüfung)
5.6 Veränderungen nach Wärmebehandlung
5.7 Nachweis
Anhang A (informativ) - Erläuterungen
Literaturhinweise
Bilder
Tabellen
This standard is included in DIN Handbook 52.
| DevelopmentNote |
Supersedes DIN 8078-2 (07/2002)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| DIN 16962-12:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYPROPYLENE (PP) FOR PIPES UNDER PRESSURE, PP-H 100, PP-B 80 AND PP-R 80 - PART 12: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING; DIMENSIONS |
| DIN HDBK 52 : 7ED 2014 | ROHRE, ROHRLEITUNGSTEILE UND ROHRVERBINDUNGEN AUS THERMOPLASTISCHEN KUNSTSTOFFEN |
| DIN 16962-10:1989-10 | PIPE JOINT ASSEMBLIES AND FITTINGS FOR TYPE 1, TYPE 2 AND 3, POLYPROPYLENE (PP) PRESSURE PIPELINES - INJECTION MOULDED FITTINGS FOR BUTT WELDING - DIMENSIONS |
| DIN 8077:2008-09 | POLYPROPYLENE (PP) PIPES - PP-H, PP-B, PP-R, PP-RCT - DIMENSIONS |
| DIN 16966-7:1995-04 | PIPE JOINTS AND THEIR ELEMENTS OF GLASS FIBRE REINFORCED POLYESTER RESINS - PART 7: BUSHINGS, FLANGES, FLANGED AND BUTT JOINTS - GENERAL QUALITY REQUIREMENTS AND TEST METHODS |
| DIN 53760:1977-08 | TESTING OF PLASTICS ARTICLES; PRACTICABILITY OF TESTING, CRITERIA FOR TESTING |
| DIN 1988-200:2012-05 | Codes of practice for drinking water installations - Part 200: Installation Type A (closed system) - Planning, components, apparatus, materials; DVGW code of practice |
| DIN 16966-1:1988-11 | PIPE JOINTS AND THEIR ELEMENTS OF GLASS FIBRE REINFORCED RESINS - FITTINGS - GENERAL QUALITY REQUIREMENTS AND TEST METHODS |
| DIN 19555:2003-04 | STEP IRONS FOR SINGLE-LINE INSTALLATION - STEP IRONS FOR SETTING IN CONCRETE |
| DIN 16961-2:2010-03 | THERMOPLASTICS PIPES AND FITTINGS WITH PROFILED WALL AND SMOOTH PIPE INSIDE - PART 2: TECHNICAL DELIVERY SPECIFICATIONS |
| DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
| DIN 16917-1:2015-10 | PIPES AND FITTINGS MADE OF THERMOPLASTIC MATERIALS WITH PROFILED WALL AND SMOOTH PIPE INSIDE - LARGE PIPES OVER DN 1200 FOR UNDERGROUND INSTALLATION - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
| DIN 4728:1993-09 | PIPELINES OF POLYPROPYLENE TYPE 2 AND TYPE 3 USED IN WARM WATER FLOOR HEATING SYSTEMS; SPECIAL REQUIREMENTS AND TESTING |
| DIN 16888-1:1989-06 | VALUATION OF CHEMICAL RESISTANCE OF PIPES OF THERMOPLASTICS MATERIALS - PIPES OF POLYOLEFINES |
| DIN 4741-1:1984-08 | VENTILATION PLANTS - POLYPROPYLENE (PP) PIPES - CALCULATION OF THE MINIMUM WALL THICKNESS |
| DIN 16962-11:1980-08 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF POLYPROPYLENE (PP) UNDER PRESSURE, TYPE 1 AND 2; TURNED AND PRESSED SOCKETS REDUCING FOR BUTT WELDING, DIMENSIONS |
| DIN 8078 Beiblatt 1:1982-02 | PIPES OF POLYPROPYLENE (PP) - CHEMICAL RESISTANCE OF PIPES AND FITTINGS |
| DIN 16962-13:1987-06 | PIPE JOINT AND FITTINGS OF POLYPROPYLENE (PP) PRESSURE PIPES - TYPE 1 AND TYPE 2, THREADED PIPE JOINTS - DIMENSIONS |
| NSF 14 : 2016 | PLASTICS PIPING SYSTEM COMPONENTS AND RELATED MATERIALS |
| DIN EN ISO 10931:2015-11 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 10931:2005 + AMD 1:2015) |
| DIN EN ISO 1167-1:2006-05 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006) |
| DIN EN ISO 9080:2013-02 | PLASTICS PIPING AND DUCTING SYSTEMS - DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS IN PIPE FORM BY EXTRAPOLATION (ISO 9080:2012) |
| DIN EN ISO 1167-2:2006-05 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006) |
| DIN IEC 60093 : 1993 | METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
| DIN ISO/TS 15874-7:2004-03 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| DIN EN 1852-1:2016-05 (Draft) | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN ISO 15874-5:2013-06 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM (ISO 15874-5:2013) |
| DIN EN ISO 1043-1:2016-09 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016) |
| DIN EN ISO 15874-1:2013-06 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013); German and English version EN ISO 15874-1:2013 |
| DIN 53752:1980-12 | TESTING OF PLASTICS; DETERMINATION OF THE COEFFICIENT OF LINEAR THERMAL EXPANSION |
| DIN EN ISO 1183-1:2013-04 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
| DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
| DIN EN ISO 1183-3:2000-05 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD |
| DIN 52612-1:1979-09 | TESTING OF THERMAL INSULATING MATERIALS; DETERMINATION OF THERMAL CONDUCTIVITY BY THE GUARDED HOT PLATE APPARATUS; TEST PROCEDURE AND EVALUATION OF RESULTS |
| DIN EN 10204:2005-01 | Metallic products - Types of inspection documents; German version EN 10204:2004 |
| DIN EN 1451-1:2016-03 (Draft) | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN ISO 15874-3:2013-06 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 3: FITTINGS (ISO 15874-3:2013) |
| DIN EN ISO 15494:2016-03 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| DIN 8077:2008-09 | POLYPROPYLENE (PP) PIPES - PP-H, PP-B, PP-R, PP-RCT - DIMENSIONS |
| DIN EN ISO 1873-2:2007-11 | PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 12162:2010-04 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| DIN EN ISO 15874-2:2013-06 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 2: PIPES (ISO 15874-2:2013) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.