DIN 53804-1:2002-04
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
STATISTICAL EVALUATION - PART 1: CONTINUOUS CHARACTERISTICS
Hardcopy , PDF
07-03-2021
01-01-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Anwendungsbereich und Zweck
2 Begriffe
3 Häufigkeitsverteilungen und ihre graphischen
Darstellungen
3.1 Graphische Darstellung bei Einzelwerten
3.2 Graphische Darstellung bei Klasseneinteilung
4 Kennwerte von Stichproben
4.1 Kennwerte zur Charakterisierung der mittleren
Lage der Einzelwerte einer Stichprobe
4.1.1 Arithmetischer Mittelwert
4.1.2 Median
4.2 Kennwerte zur Charakterisierung der Streuung
der Einzelwerte einer Stichprobe
4.2.1 Varianz
4.2.2 Standardabweichung
4.2.3 Variationskoeffizient
4.2.4 Spannweite
4.3 Berechnung von Mittelwert und Varianz aus
Einzelwerten
4.4 Berechnung von Mittelwert und Varianz bei
Klasseneinteilung
5 Testen auf Normalverteilung
6 Vertrauensbereiche für Parameter der
Normalverteilung
6.1 Vertrauensbereich für den Erwartungswert
6.2 Vertrauensbereich für die Standardabweichung
6.3 Vertrauensbereich für die Differenz zweier
Erwartungswerte bei unabhängigen Stichproben
6.4 Vertrauensbereich für die Differenz zweier
Erwartungswerte bei paarweise verbundenen
Stichproben
7 Testen von Erwartungswerten und Varianzen bei
Normalverteilung
7.1 Vergleich eines Erwartungswertes mit einem
vorgegebenen Wert
7.2 Vergleich zweier Erwartungswerte bei
unabhängigen Stichproben
7.3 Vergleich zweier Erwartungswerte bei paarweise
verbundenen Stichproben
7.4 Vergleich zweier Varianzen
8 Ausreisserverdächtige Einzelwerte und ihre
Behandlung
8.1 Ausreissertest nach Dixon
8.2 Ausreissertest nach Grubbs
Anhang A Beispiele aus der Textiltechnik
Anhang B Übersicht über die benutzten Formelzeichen
Zitierte Normen und Unterlagen
Erläuterungen
This standard is included in DIN Handbook 224.
| DevelopmentNote |
Supersedes DIN 53804 (08/2002)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| Supersedes |
| DIN 53816:1993-02 (Draft) | TESTING OF TEXTILES; SIMPLE TENSILE TEST FOR SINGLE FIBRES IN CONDITIONED OR WET STATE |
| DIN 53854:1993-06 | TESTING OF TEXTILES; DETERMINATIONS OF MASS OF TEXTILE FABRICS WITH THE EXCEPTION OF KNITTED FABRICS AND NONWOVEN |
| DIN 53835-2:1981-08 | Testing of textiles; determination of the elastic behaviour of single and plied elastomeric yarns by repeated application of tensile load between constant extension limits |
| DIN 60850-2:1987-03 | TEXTILE GLASS; GLASS FILAMENT YARNS; TECHNICAL DELIVERY CONDITIONS |
| DIN 53805:1980-10 | TESTING OF TEXTILES - DETERMINATION OF THE LENGTH OF STAPLE FIBRES - TERMINOLOGY AND GENERAL PRINCIPLES |
| VDI 3857 Blatt 2:2014-02 | Assessment values for accumulation of substances in grass cultures caused by ambient air pollution - Orientation values for maximum background levels of selected inorganic air pollutants |
| VDI/VDE 2645 Blatt 2:2014-09 | Capability test for fastening technology - Machine capability test - MCT |
| VDI 2449 Blatt 1:1995-02 | Measurement methods test criteria - Determination of performance characteristics for the measurement of gaseous pollutants (immission) |
| BS ISO 26303:2012 | Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools |
| DIN 53803-1:1991-03 | Sampling; statistical basis; one-way layout |
| UNE-ISO 26303:2013 | Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools |
| DIN 1319-3:1996-05 | FUNDAMENTALS OF METROLOGY - PART 3: EVALUATION OF MEASUREMENTS OF A SINGLE MEASURE AND, MEASUREMENT CERTAINTY |
| DIN 6868-161:2013-01 | Image quality assurance in diagnostic X-ray departments - Part 161: RoeV acceptance testing of dental radiographic equipment for digital cone-beam computed tomography |
| DIN 4103-1:2015-06 | INTERNAL NON-LOADBEARING PARTITIONS - PART 1: REQUIREMENTS AND VERIFICATION |
| DIN 55350-12:1989-03 | Concepts in the field of quality and statistics; concepts relating to characteristics |
| DIN 32645:2008-11 | CHEMICAL ANALYSIS - DECISION LIMIT, DETECTION LIMIT AND DETERMINATION LIMIT UNDER REPEATABILITY CONDITIONS - TERMS, METHODS, EVALUATION |
| DIN 53804-1 Beiblatt 1:1990-09 | STATISTICAL EVALUATION - MEASURABLE (CONTINUOUS) CHARACTERISTICS - EXAMPLES OF CHEMICAL ANALYSIS |
| DIN 55303-5:1987-02 | STATISTICAL INTERPRETATION OF DATA; DETERMINATION OF A STATISTICAL TOLERANCE INTERVAL |
| DIN 53843-1:1992-11 | TESTING OF TEXTILES - LOOP TENSILE TEST - YARNS |
| DIN 55303-2:1984-05 | STATISTICAL INTERPRETATION OF DATA; TESTS AND CONFIDENCE INTERVALS RELATING TO EXPECTATIONS AND VARIANCES |
| DIN HDBK 224 : 3ED 2010 | |
| ISO 26303:2012 | Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools |
| DIN 53835-4:1981-08 | TESTING OF TEXTILES - DETERMINATION OF THE ELASTIC BEHAVIOUR OF SINGLE AND PLIED YARNS BY A SINGLE APPLICATION OF TENSILE LOAD BETWEEN CONSTANT FORCE LIMITS |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| DIN 13303-2:1982-11 | STOCHASTICS - MATHEMATICAL STATISTICS - CONCEPTS, SIGNS AND SYMBOLS |
| DIN 53803-1:1991-03 | Sampling; statistical basis; one-way layout |
| DIN 55350-31:1985-12 | CONCEPTS OF QUALITY MANAGEMENT AND STATISTICS; CONCEPTS OF ACCEPTANCE SAMPLING INSPECTION |
| DIN 55350-22:1987-02 | CONCEPTS OF QUALITY ASSURANCE AND STATISTICS - CONCEPTS OF STATISTICS - SPECIAL PROBABILITY DISTRIBUTIONS |
| NEN 1047 : 1967 | INSTRUCTIONS FOR STATISTICAL TREATMENT OF SERIES OF OBSERVATIONS |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| DIN ISO 5725-1:1997-11 | Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994) |
| DIN 53803-2:1994-03 | SAMPLING; PRACTICAL EXECUTION |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| DIN 13303-1:1982-05 | STOCHASTICS; PROBABILITY THEORY, COMMON FUNDAMENTAL CONCEPTS OF MATHEMATICAL AND OF DESCRIPTIVE STATISTICS; CONCEPTS, SIGNS AND SYMBOLS |
| DIN 55350-24:1982-11 | CONCEPTS OF QUALITY ASSURANCE AND STATISTICS; CONCEPTS OF STATISTICS; ANALYTICAL STATISTICS |
| DIN 1313:1998-12 | QUANTITIES |
| DIN 55350-23:1983-04 | CONCEPTS OF QUALITY ASSURANCE AND STATISTICS; CONCEPTS OF STATISTICS; DESCRIPTIVE STATISTICS |
| DIN 55303-5:1987-02 | STATISTICAL INTERPRETATION OF DATA; DETERMINATION OF A STATISTICAL TOLERANCE INTERVAL |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 5479:1997 | Statistical interpretation of data — Tests for departure from the normal distribution |
| DIN 55350-21:1982-05 | CONCEPTS OF QUALITY ASSURANCE AND STATISTICS; CONCEPTS OF STATISTICS; RANDOM VARIABLES AND PROBABILITY DISTRIBUTIONS |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.