DIN 17455:1999-02
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
WELDED CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS
Hardcopy , PDF
01-02-2006
English
12-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Anwendungsbereich
2 Normative Verweisungen
3 Definitionen
4 Sorteneinteilung
5 Bezeichnung und Bestellung
6 Anforderungen
6.1 Herstellverfahren
6.2 Lieferzustand
6.3 Chemische Zusammensetzung
6.4 Mechanische und technologische Eigenschaften
6.5 Schweisseignung und Schweissbarkeit
6.6 Weiterverarbeitung und Wärmebehandlung
6.7 Korrosionschemisches Verhalten
6.8 Ausführungsart und Aussehen der Oberfläche
und der Schweissverbindung
6.9 Dichtheit
6.10 Masse, längenbezogene Masse und Grenzabmasse
6.11 Physikalische Eigenschaften
7 Prüfungen und Bescheinigungen über Materialprüfungen
7.1 Allgemeines
7.2 Ort der Prüfung
7.3 Prüfumfang
7.4 Probenahme und Probenvorbereitung
7.5 Durchführung der Prüfungen
7.6 Wiederholungsprüfungen
7.7 Bescheinigungen über Materialprüfungen
8 Kennzeichnung
9 Beanstandungen
Anhang A (informativ) Anhaltsangaben für die Wärmebehandlung
und Weiterverarbeitung
Anhang B (informativ) Literaturhinweise
This standard is included in DIN Handbook 405. Applies to general purpose welded circular tubes and pipes tubes) made from stainless steels. The tubes can be used as construction tubing, pipes for pharmaceutical, food and automobile industries also domestic installation and decorative purposes. Tubes conforming to the Standard are intended for use on 80% utilization of permissible design stress in the weld. The Standard does not apply to welded circular austenitic stainless steel that are subject to special requirements.
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| SNV DIN 17455 : 1985 | Identical |
| DIN 17441:1997-02 | STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR COLD ROLLED STRIPS AND SLIT COILS STRIP AND SHEETS CUT FROM SUCH STRIPS FOR PRESSURE PURPOSES |
| DIN 50930-4:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF STAINLESS STEELS |
| DIN 5512-3:2004-05 | MATERIALS FOR RAIL VEHICLES - STEELS - PART 3: STAINLESS STEEL FLAT PRODUCTS - SELECTED STANDARD |
| DIN 18160-1:2001-12 | CHIMNEYS - PART 1: DESIGN AND PERFORMANCE |
| DIN 8556-1:1986-05 | FILLER METALS FOR WELDING STAINLESS AND HEAT RESISTANT STEELS; DESIGNATION, TECHNICAL DELIVERY CONDITIONS |
| DIN 25452:1992-04 | MECHANICAL DESIGN OF FUEL ELEMENT STORAGE POOL IN NUCLEAR POWER PLANTS WITH LIGHT-WATER REACTORS |
| DIN 28125 Beiblatt 1:1989-04 | Hinged covers; example for construction of a lifting aid |
| DIN 4133:1991-11 | STEEL STACKS |
| DIN 28053:1997-04 | CHEMICAL APPARATUS - ORGANIC COATINGS AND LININGS ON METAL COMPONENTS - REQUIREMENTS FOR METAL SURFACES |
| DIN 6656:1997-12 | PNEUMATIC TUBE SYSTEMS - CONVEYOR TUBES, CONVEYOR TUBE BENDS AND SLEEVES FOR PNEUMATIC TUBES LINES IN STEEL AND STAINLESS STEEL |
| DIN 4942:1999-01 | THREADED STEEL RISING PIPES FOR RAISING OF WATER - NOMINAL DIAMETER DN 50 TO DN 200 |
| DIN 17457:1985-07 | WELDED CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| DIN 11850:2009-02 | STAINLESS STEEL TUBES FOR THE FOOD AND CHEMICAL INDUSTRIES - DIMENSIONS, MATERIALS |
| EN 10002-5:1991 | Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature |
| DIN ISO 2859-1:2014-08 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION (ISO 2859-1:1999 + COR. 1:2001 + AMD.1:2011) |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
| DIN EN ISO 1127:1997-03 | STAINLESS STEEL TUBES - DIMENSIONS, TOLERANCES AND CONVENTIONAL MASSES PER UNIT LENGTH |
| DIN 50104:1983-11 | TESTING OF HOLLOW BODIES BY INTERNAL PRESSURE; LEAK DETECTION UP TO A CERTAIN PRESSURE VALUE; GENERAL SPECIFICATIONS |
| DIN EN 10204:2005-01 | Metallic products - Types of inspection documents; German version EN 10204:2004 |
| EN 10021:2006 | General technical delivery conditions for steel products |
| DIN EN 10002-5:1992-02 | TENSILE TESTING OF METALLIC MATERIALS - PART 5: METHOD OF TESTING AT ELEVATED TEMPERATURE |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| DIN EN 10002-1:2001-12 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| PREN 10217-7 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| DIN 17440:2001-03 | STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE |
| DIN 2413-1:1993-10 | STEEL PIPES - DESIGN OF STEEL PRESSURE PIPES |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.