DIN 1651:1988-04
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS
01-10-1999
12-01-2013
Kein Inhaltsverzeichnis in der Norm vorhanden.
CONTAINED IN DIN HDBK 404 Covers semi-finished products (e.g. blooms, slabs, billets), hot rolled wire, hot rolled steel bars (round, square, hexagonal, octagonal and flat steel bars), and bright steel made from free-cutting steels as specified in table 2. Table 1 lists the combination of surface conditions and heat treatment condition in which the steels may be supplied (see subclause 7.2.2 for special surface finish).
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EURONORM 87-1 : 1970 | Similar to |
| SNV DIN 1651 : 1988 | Identical |
| ISO 683-9:1988 | Similar to |
| DIN 71428:1989-11 | COMPRESSION COUPLINGS WITH OLIVES - CYLINDRICAL THREAD NIPPLES FOR USE WITH UNION NUTS |
| DIN 7642:1997-07 | COMPRESSION COUPLINGS - RING TYPE NIPPLES FOR BRAZED CONNECTION |
| DIN 3387-2:1991-12 | TUBE CONNECTIONS FOR METALLIC TUBES HAVING FLANGED ENDS FOR GAS PIPES |
| DIN 7631:1985-01 | Compression couplings with spherical liner; straight compression couplings |
| DIN 1471:1978-11 | GROOVED PINS, FULL LENGTH TAPER-GROOVED |
| DIN 8273-2:1982-05 | BALANCE STUDS FOR WATCHES AND CLOCKS; WITHOUT HEAD |
| DIN 65370:1991-07 | Aerospace; sockets, eight- and fourteen-pole 5 Amp |
| DIN 71436:1989-11 | COMPRESSION COUPLINGS WITH OLIVES - HOLLOW SCREW FITTINGS AND RING CONNECTION FITTINGS FOR USE WITH UNION NUTS |
| DIN 71429:1989-11 | COMPRESSION COUPLINGS WITH OLIVES - BULKHEAD COMPRESSION COUPLINGS SMALL STUD AND ELBOW FITTINGS FOR USE WITH UNION NUTS |
| DIN 73368:1986-02 | OVERFLOW VALVES AND HOLLOW SCREW FOR FUEL INJECTION DEVICES |
| DIN 7632:1985-01 | Compression couplings with spherical liner; reducers |
| DIN 8906:1990-06 | PN 40 FLARED FLANGE SOLDERLESS COMPRESSION COUPLINGS FOR USE IN REFRIGERATING SYSTEMS |
| DIN 17240:1976-07 | HEAT RESISTING AND HIGHLY HEAT RESISTING MATERIALS FOR BOLTS AND NUTS - QUALITY SPECIFICATIONS |
| DIN 65369:1991-07 | Aerospace; sockets, five- and eleven-pole 25 Amp |
| DIN 59360:1981-10 | GROUND AND POLISHED BRIGHT ROUND STEEL; DIMENSIONS; PERMISSIBLE DEVIATIONS ACCORDING TO ISO TOLERANCE ZONE H7 |
| DIN 8912:1990-06 | COUPLING NUTS AND SCREWED PLUGS FOR USE WITH PN 40 FLARED FLANGE SOLDERLESS COMPRESSION COUPLINGS IN REFRIGERATING SYSTEMS |
| DIN 59361:1981-10 | GRINDED AND POLISHED BRIGHT ROUND STEEL; DIMENSIONS, TOLERANCES ACCORDING TO ISO TOLERANCES ZONE H6 |
| DIN 1473:1978-11 | GROOVED PINS, FULL LENGTH PARALLEL-GROOVED WITH CHAMFER |
| DIN 173-1:1992-11 | RENEWABLE JIG BUSHES - SLIP TYPE FORM K AND KL, FIXED TYPE FORM L - ACCESSORIES |
| DIN 71988:1983-02 | CABLES FOR CONTROLS FOR MOTORBYCICLES - NIPPLES NOT TO BE USED FOR NEW DESIGNS |
| DIN 71752:1994-04 | FORK JOINTS - YOKES |
| DIN 7647:1995-08 | Compression couplings with spherical liner - Male stud compression couplings |
| DIN 19999:1984-05 | TERMS AND DEFINITIONS FOR WATER AND WASTE WATER ENGINEERING - SYNOPSIS OF STANDARDIZED TERMS |
| DIN 17022-3:1989-04 | HEAT TREATMENT OF FERROUS MATERIALS - HEAT TREATMENT METHODS - CASE HARDENING |
| DIN 8919:1993-10 (Draft) | REFRIGERATION; REFRIGERANT CONTROL AND FILLING VALVES FOR CONNECTION TO REFRIGERATION FLARE TYPE FITTINGS MWP 40 |
| DIN 8166:1992-03 | ROLLERS FOR CONVEYOR CHAINS WITH SOLID PINS, TYPE FV AND FVT; |
| DIN 5586:1989-02 | Compressed air equipment for rail vehicles; locking screws with collar and vent |
| DIN 65371:1992-06 | AEROSPACE; SOCKETS, FIVE- AND ELEVEN-POLE, 10 AMP |
| DIN 54452:1981-11 | TESTING OF ADHESIVES FOR METALS AND ADHESIVELY BONDED METAL JOINTS; COMPRESSION SHEAR TEST |
| DIN 17014-1:1988-08 | HEAT TREATMENT OF FERROUS MATERIALS - TERMINOLOGY |
| DIN 50049:1992-04 | METALLIC PRODUCTS; TYPES OF INSPECTION DOCUMENTS |
| DIN 17010:1985-06 | GENERAL TECHNICAL DELIVERY CONDITIONS FOR STEEL AND STEEL PRODUCTS |
| DIN 50145:1975-05 | TESTING OF METALLIC MATERIALS; TENSILE TEST |
| DIN 50601:1985-08 | METALLOGRAPHIC TEST METHODS; DETERMINATION OF THE FERRITIC OR AUSTENITIC GRAIN SIZE OF STEELS AND FERROUS MATERIALS |
| DIN 17200:1987-03 | STEELS FOR QUENCHING AND TEMPERING - TECHNICAL DELIVERY CONDITIONS |
| DIN 50351:1985-02 | TESTING OF METALLIC MATERIALS - BRINELL HARDNESS TEST |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.