• Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

DEFSTAN 61-12(PT9)/5(2008) : 2008

Current

Current

The latest, up-to-date edition.

WIRES, CORDS AND CABLES ELECTRICAL - METRIC UNITS - PART 9: CABLES AND WIRES ELECTRICAL FOR CABLES, RADIO FREQUENCY INCLUDING LIMITED FIRE HAZARD (LFH) VARIANTS

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

30-11-2008

Free

Foreword
Introduction
1 Scope
2 Warning
3 Normative References
4 Definitions
5 Materials
   5.1 Copper Components
   5.2 Copper Covered Steel Wire
   5.3 Steel
   5.4 Aluminium
   5.5 Lead Alloy
   5.6 Brass
   5.7 Paper
   5.8 Polythene
   5.9 Polyvinyl-chloride
   5.10 Polytetrafluoroethylene (PTFE)
   5.11 Nylon
   5.12 Fluorinated Ethylene Propylene (FEP)
   5.13 Polyethylene
   5.14 Low Fire Hazard (LFH)
6 Construction
   6.1 General
   6.2 Inner Conductor or Conductors
   6.3 Dielectric
   6.4 Outer Conductor or Screen
   6.5 Outer Protection
7 Electrical Characteristics of Cables
   7.1 General
   7.2 Spark Test on Sheath
   7.3 Voltage Test on Dielectric
   7.4 Insulation
   7.5 Conductor Resistance
   7.6 Capacitance
   7.7 Capacitance Unbalance
   7.8 Discharge Test
   7.9 Attenuation
   7.10 Velocity Ratio
   7.11 Mean Characteristic Impedance (Zm)
   7.12 Uniformity of Effective Characteristic Impedance (Ze)
   7.13 Surface Transfer Impedance (ZT)
8 Tests
   8.1 Climatic Tests
   8.2 Low Fire Hazard Tests - Sheathing Materials
   8.3 Dimensional Stability Test for Cables with d.o.d.
        <= 8.38 mm only
   8.4 Bending and Air Pressure Test
   8.5 Resistance to Fluids
   8.6 Flammability Test
   8.7 Solderability
9 Marking
10 Packaging and Labelling
   10.1 Sealing
   10.2 Packing and Labelling
11 Product Conformance Certification (PCC) and General Testing
   Conditions
12 Test Groups
Annex A - Packaging of Wires and Cables
   A.1 General
Annex B - Cable Data
   B.1 Uniradio No. M43
   B.2 Uniradio No. M54
   B.3 Uniradio No. M57
   B.4 Uniradio No. M60
   B.5 Uniradio No. M64
   B.6 Uniradio No. M65
   B.7 Uniradio No. M67
   B.8 Uniradio No. M68
   B.9 Uniradio No. M70
   B.10 Uniradio No. M72
   B.11 Uniradio No. M74
   B.12 Uniradio No. M76
   B.13 Uniradio No. M77
   B.14 Uniradio No. M78
   B.15 Uniradio No. M90
   B.16 Uniradio No. M91
   B.17 Uniradio No. M95
   B.18 Uniradio No. M96
   B.19 Uniradio No. M102
   B.20 Uniradio No. M104
   B.21 Uniradio No. M105
   B.22 Uniradio No. M106
   B.23 Uniradio No. M107
   B.24 Uniradio No. M108
   B.25 Uniradio No. M109
   B.26 Uniradio No. M110
   B.27 Uniradio No. M112
   B.28 Uniradio No. M113
   B.29 Uniradio No. M114
   B.30 Uniradio No. M115
   B.31 Uniradio No. M116
   B.32 Uniradio No. M117
   B.33 Uniradio No. M200
   B.34 Uniradio No. M201
   B.35 Uniradio No. M202
   B.36 Uniradio No. M203
   B.37 Uniradio No. M204
   B.38 Uniradio No. M205
   B.39 Uniradio No. M206
   B.40 Uniradio No. M207
   B.41 Uniradio No. M208
   B.42 Uniradio No. M209
   B.43 Uniradio No. M210
   B.44 Uniradio No. M301
   B.45 Uniradio No. M302
   B.46 Uniradio No. M303
   B.47 Uniradio No. M304
   B.48 Uniradio No. M305
   B.49 Uniradio No. M306
   B.50 LFH/URM43
   B.51 LFM/URM54
   B.52 LFH/URM57
   B.53 LFH/URM60
   B.54 LFH/URM64
   B.55 LFH/URM65
   B.56 LFH/URM67
   B.57 LFH/URM70
   B.58 LFH/URM74
   B.59 LFH/URM76
   B.60 LFH/URM77
   B.61 LFH/URM90
   B.62 LFH/URM91
   B.63 LFH/URM95
   B.64 LFH/URM96
   B.65 LFH/URM102
   B.66 LFH/URM105
   B.67 LFH/URM106
   B.68 LFH/URM107
   B.69 LFH/URM108
   B.70 LFH/URM109
   B.71 LFH/URM110
   B.72 LFH/URM111
   B.73 LFH/URM113
   B.74 LFH/URM114
   B.75 LFH/URM115
   B.76 LFH/URM116
   B.77 Uniradio No. M117

Describes the requirements for Cables and Wires Electrical for Radio Frequency Including Limited Fire Hazard (LFH) Variants for use in equipment used by the MOD.

DevelopmentNote
Supersedes DEFSTAN 61-12(PT9)/4(1993). (01/2009) This standard is obsolescent because it is no longer required for procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (05/2016)
DocumentType
Standard
Pages
188
PublisherName
UK Ministry of Defence Standards
Status
Current
Supersedes

DEFSTAN 00-970(PT1)SEC6/15(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT
DEFSTAN 02-320/3(2009) : 2009 REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 00-970(PT1)SEC6/10(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT
DEFSTAN 00-970(PT1)SEC6/11(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT
DEFSTAN 00-970(PT1)SEC6/9(2012) : 2012 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6 - EQUIPMENT
DEFSTAN 00-970(PT1)SEC6/14(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT
DEFSTAN 02-320/4(2015) : 2015 REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 00-970(PT1)SEC6/8(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6 - EQUIPMENT
DEFSTAN 00-970(PT1)SEC6/13(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT
DEFSTAN 00-970(PT1)SEC6/16(2016) : 2016 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT
DEFSTAN 02-512(PT1)/3(2012) : 2012 GUIDE TO CABLES, ELECTRICAL AND ASSOCIATED ITEMS

BS EN 50289-1-8:2017 Communication cables. Specifications for test methods Electrical test methods. Attenuation
BS 6234:1987 Specification for polyethylene insulation and sheath of electric cables
BS EN 622-2:2004 Fibreboards. Specifications Requirements for hardboards
BS EN 13601:2013 Copper and copper alloys. Copper rod, bar and wire for general electrical purposes
BS EN 60332-1-2 : 2004 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004)
BS 6480:1988 Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V
BS EN 60228:2005 Conductors of insulated cables
BS EN 13602:2013 Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors
BS EN 50290-1-2:2004 Communication cables Definitions
DEFSTAN 61-12(PT0)/2(2006) : 2006 WIRES, CORDS AND CABLES, ELECTRICAL - PART 0: GENERAL REQUIREMENTS AND TEST METHODS - GENERAL SPECIFICATION
BS 6746:1990 Specification for PVC insulation and sheath of electric cables
BS EN 60068-2-1:2007 Environmental testing Tests. Test A. Cold
BS 3G 230:2000 Specification for general requirements for aircraft electrical cables (second series)
BS EN 50289-1-7:2001 Communication cables. Specifications for test methods. Electrical test methods Velocity of propagation - sec7 : Velocity of propagation
DEFSTAN 61-12(PT31)/2(2006) : 2006 WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 31: SHEATHS - LIMITED FIRE HAZARD
BS EN 60068-2-2:2007 Environmental testing Tests. Test B. Dry heat
BS G 250:1994 Specification for identification marking of electric cables
BS EN 60068-2-14:2009 Environmental testing Tests. Test N. Change of temperature

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.