DEFSTAN 02-329/4(2015) : 2015
Current
Current
The latest, up-to-date edition.
REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
08-07-2015
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Warning
3 Normative References
4 Definitions
5 Abbreviations
6 Performance Specification
7 National/International Regulations
8 Requirements
9 Design Requirements/Guidance
10 Corporate Experience & Knowledge
Describes the general requirements for heat exchangers installed in HM Surface Ships and Submarines.
| DevelopmentNote |
Supersedes DEFSTAN 02-329/3(2010). (09/2015)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Current
|
| Supersedes |
| DEFSTAN 02-863/2(2010) : 2010 | REQUIREMENTS FOR THE CLASSIFICATION, DIMENSIONS, TOLERANCES, WELD REPAIR AND GENERAL STANDARDS OF ACCEPTANCE FOR COPPER AND NICKEL ALLOY CASTINGS |
| DEFSTAN 02-703/2(2011) : 2011 | THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
| BS EN 1653:1998 | Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
| DEFSTAN 02-374/2(2009) : 2009 | RUBBER FLEXIBLE PIPES AND BELLOWS FOR USE IN SUBMARINES |
| BS EN 10222-4:2017 | Steel forgings for pressure purposes Weldable fine grain steels with high proof strength |
| BS EN 10028-5:2017 | Flat products made of steels for pressure purposes Weldable fine grain steels, thermomechanically rolled |
| BS EN 10217-4:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties |
| BS EN 10028-7:2007 | Flat products made of steels for pressure purposes Stainless steels |
| DEFSTAN 05-10(PT2)/6(2013) : 2013 | PRODUCT DEFINITION INFORMATION - PART 2: DIGITAL PRODUCT DEFINITION INFORMATION |
| BS EN 1676:2010 | Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications |
| BS EN 10222-1:2017 | Steel forgings for pressure purposes General requirements for open die forgings |
| DEFSTAN 02-833(PT2)/3(2011) : 2011 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
| ASTM B 338 : 2017 : REDLINE | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| BS MA 18:1973 | Specification for salt water piping systems in ships |
| ASTM B 265 : 2015 : REDLINE | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| BS EN 10048:1997 | Hot rolled narrow steel strip. Tolerances on dimensions and shape |
| DEFSTAN 02-745/2(2012) : 2012 | CLASSIFICATION, INSPECTION REQUIREMENTS AND ACCEPTANCE STANDARDS FOR STEEL CASTINGS |
| DEFSTAN 02-341(PT1)/1(2000) : 2000 | REQUIREMENTS FOR CLEANING OF ITEMS, COMPONENTS AND EQUIPMENT FOR FLUID SYSTEMS - PART 1: CLEANING CATEGORY 2 |
| DEFSTAN 02-879(PT2)/1(2011) : 2011 | REQUIREMENTS FOR COPPER ALLOY MATERIALS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
| BS 2871-1:1971 | Specification for copper and copper alloys. Tubes Copper tubes for water, gas and sanitation |
| DEFSTAN 01-5/17(2011) : 2011 | FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS |
| BS EN 10222-5:2017 | Steel forgings for pressure purposes Martensitic, austenitic and austenitic-ferritic stainless steels |
| BS EN 10085:2001 | Nitriding steel. Technical delivery conditions |
| BS EN 10028-6:2017 | Flat products made of steels for pressure purposes Weldable fine grain steels, quenched and tempered |
| BS EN ISO 9445-2:2010 | Continuously cold-rolled stainless steel. Tolerances on dimensions and form Wide strip and plate/sheet |
| BS EN 10217-2 : 2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DEFSTAN 08-123/2(2012) : 2012 | REQUIREMENTS FOR DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS |
| DEFSTAN 02-747(PT4)/3(2012) : 2012 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 4: NICKEL ALUMINIUM BRONZE NAVAL ALLOY SAND CASTINGS WITH WELDING PERMITTED TO THE NON-WETTED SURFACE (CLASS 1 AND 2 CASTINGS ONLY) |
| BS EN 10095:1999 | Heat resisting steels and nickel alloys |
| DEFSTAN 08-118(PT1)/1(2000) : 2000 | DESIGN GUIDE ON THE REDUCTION OF ACOUSTIC NOISE IN SURFACE SHIPS - CATEGORY 3 - PART 1: REDUCTION OF NOISE RADIATED UNDERWATER |
| BS EN 1057 : 2006 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| DEFSTAN 02-862(PT2)/3(2011) : 2011 | NAVAL FASTENERS - PART 2: PROCUREMENT OF NON-FIRST LEVEL FASTENERS |
| BS EN 10250-4:2000 | Open steel die forgings for general engineering purposes Stainless steels |
| BS EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape |
| DEFSTAN 07-247(PT1)/3(2009) : 2009 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
| BS EN 10217-6:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties |
| DEFSTAN 02-747(PT2)/3(2012) : 2012 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 2: NICKEL ALUMINIUM BRONZE NAVAL ALLOY INGOTS AND SAND CASTING WITH WELDING PERMITTED TO THE WETTED SURFACE |
| DEFSTAN 02-878/1(2011) : 2011 | NON-FERROUS TUBES AND PIPES FOR USE IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| BS EN 10028-1:2017 | Flat products made of steels for pressure purposes General requirements |
| DEFSTAN 02-387/2(2001) : 2001 | REQUIREMENTS FOR CHEMICAL CLEANING OF CHILLED WATER SYSTEMS FOR HM SURFACE SHIPS, SUBMARINES AND ROYAL FLEET AUXILIARY VESSELS |
| DEFSTAN 02-345/2(2013) : 2013 | REQUIREMENTS FOR FLEXIBLE RUBBER PIPE ASSEMBLIES AND BELLOWS FOR USE IN SYSTEMS FROM VACUUM TO 20 BAR |
| BS EN 10028-3:2017 | Flat products made of steels for pressure purposes Weldable fine grain steels, normalized |
| BS EN 1654:1998 | Copper and copper alloys. Strip for springs and connectors |
| BS EN 10216-3:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| BS EN 1652:1998 | Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
| DEFSTAN 02-862(PT1)/3(2011) : 2011 | NAVAL FASTENERS - PART 1: MATERIAL SELECTION AND USE |
| BS EN 10087:1999 | Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods |
| BS EN 1559-4:2015 | Founding. Technical conditions of delivery Additional requirements for aluminium alloy castings |
| BS EN 10084:2008 | Case hardening steels. Technical delivery conditions |
| DEFSTAN 02-879(PT1)/1(2011) : 2011 | REQUIREMENTS FOR COPPER ALLOY MATERIALS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 1: SHEET, STRIP AND PLATE |
| BS EN 10028-2:2017 | Flat products made of steels for pressure purposes Non-alloy and alloy steels with specified elevated temperature properties |
| DEFSTAN 02-743(PT1)/3(2012) : 2012 | PIPE MANIPULATION - PART 1: BENDING OF PIPES |
| BS EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape |
| BS EN 10217-5:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 10028-4:2017 | Flat products made of steels for pressure purposes Nickel alloy steels with specified low temperature properties |
| DEFSTAN 02-747(PT3)/2(2011) : 2011 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 3: NICKEL ALUMINIUM BRONZE COMMERCIAL ALLOY INGOTS AND SAND CASTINGS |
| BS 2871-2:1972 | Specification for copper and copper alloys. Tubes Tubes for general purposes |
| DEFSTAN 02-830/1(2010) : 2010 | REQUIREMENTS FOR GUNMETAL INGOTS AND CASTINGS |
| DEFSTAN 05-10(PT1)/6(2013) : 2013 | PRODUCT DEFINITION INFORMATION - PART 1: HARDCOPY/MICROFORM PRODUCT DEFINITION INFORMATION |
| BS EN 12449:2016 | Copper and copper alloys. Seamless, round tubes for general purposes |
| BS EN 10217-3:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| DEFSTAN 05-10(PT0)/6(2013) : 2013 | PRODUCT DEFINITION INFORMATION - PART 0: GENERAL INTRODUCTION TO PRODUCT DEFINITION INFORMATION |
| BS EN 1706:2010 | Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties |
| DEFSTAN 02-824(PT1)/3(2013) : 2013 | COPPER NICKEL CHROMIUM SAND CASTINGS AND INGOTS - PART 1: PRODUCTION REQUIREMENTS AND WELDING |
| DEFSTAN 02-303/3(2015) : 2015 | LUBRICATING OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS & SUBMARINES |
| BS EN 12451:2012 | Copper and copper alloys. Seamless, round tubes for heat exchangers |
| BS EN 10216-1:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| BS EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| DEFSTAN 02-862(PT3)/3(2011) : 2011 | NAVAL FASTENERS - PART 3: PROCUREMENT OF FIRST LEVEL FASTENERS |
| BS EN 10222-2:2017 | Steel forgings for pressure purposes Ferritic and martensitic steels with specified elevated temperatures properties |
| BS EN 10217-1:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| DEFSTAN 02-330/3(2013) : 2013 | REQUIREMENTS FOR MAIN PROPULSION PLANT CONDENSERS IN NUCLEAR POWERED SUBMARINES |
| BS EN 10216-4:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties |
| DEFSTAN 02-747(PT1)/3(2012) : 2012 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 1: NICKEL ALUMINIUM BRONZE NAVAL ALLOY CENTRIFUGALLY CAST |
| DEFSTAN 02-824(PT3)/1(2005) : 2005 | COPPER NICKEL CHROMIUM SAND CASTINGS AND INGOTS - PART 3: PROCEDURES FOR REQUALIFICATION OF COPPER NICKEL CHROMIUM CASTINGS (CAT 1) |
| BS EN ISO 9445-1:2010 | Continuously cold-rolled stainless steel. Tolerances on dimensions and form Narrow strip and cut lengths |
| BS 2871-3:1972 | Specification for copper and copper alloys. Tubes Tubes for heat exchangers |
| DEFSTAN 08-120/2(2014) : 2014 | REQUIREMENTS FOR DETERMINING THE SHOCK STRENGTH OF EQUIPMENT |
| DEFSTAN 02-900(PT3)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 3: SYSTEMS, GENERIC |
| DEFSTAN 02-824(PT2)/2(2005) : 2005 | COPPER NICKEL CHROMIUM SAND CASTINGS - PART 2: GUIDE TO PRODUCTION METHODS |
| BS EN 10216-2:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 10083-1:2006 | Steels for quenching and tempering General technical delivery conditions |
| DEFSTAN 02-772/1(2007) : 2007 | WELDING AND FABRICATION OF PIPEWORK, MACHINERY AND ENGINEERING COMPONENTS FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| DEFSTAN 02-207/1(2012) : 2012 | QUALITY MANAGEMENT FRAMEWORK AND REQUIREMENTS FOR MATERIEL SAFETY IN SUBMARINES |
| DEFSTAN 02-360/2(2001) : 2001 | GUIDANCE TO THE SELECTION OF LOW PRESSURE METRIC STANDARD VALVES |
| DEFSTAN 02-102(PT1)/3(2005) : 2005 | REQUIREMENTS FOR AIR-CONDITIONING AND VENTILATION - PART 1: HM SURFACE SHIPS AND ROYAL FLEET AUXILIARIES |
| BS EN 1559-1:2011 | Founding. Technical conditions of delivery General |
| DEFSTAN 02-375/1(2000) : 2000 | VALVE DESIGN AND MANUFACTURE CATEGORY 2 |
| BS EN 10222-3:2017 | Steel forgings for pressure purposes Nickel steels with specified low temperature properties |
| DEFSTAN 66-2/4(2003) : 2003 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) |
| DEFSTAN 05-10(PT3)/6(2013) : 2013 | PRODUCT DEFINITION INFORMATION - PART 3: PRODUCT DEFINITION INFORMATION GUIDANCE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.