DEFSTAN 02-327/3(2006) : 2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
REQUIREMENTS AND GUIDANCE FOR THE PROCUREMENT OF PUMPS FOR AUXILIARY SYSTEMS
Hardcopy , PDF
09-09-2016
English
01-01-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Warning
3 Related Documents
4 Abbreviations
5 Definitions
6 Performance Specification
6.1 Pump Operation
6.2 Pump/Eductor Design
6.3 Quality Assurance
6.4 Certification
6.5 Fitness for Purpose
6.6 Performance
6.7 Commercial Issues
7 National/International Regulations
7.1 Relevant Standards (See also Performance Specification)
8 Military Standards/Requirements
8.1 Relevant Standards (See also Performance Specification)
9 Design Requirements/Guidance
9.1 Pump Design
9.2 Bearings
9.3 Couplings and Guards
9.4 Pipe Connections
9.5 Lubrication Systems
9.6 Seals
9.7 General Details
9.8 Parts Interchangeability
9.9 Design Features for Rotodynamic Pumps
9.10 Critical Speeds
9.11 Design Features for Centrifugal and Mixed Flow Pumps
9.12 Design Features for Positive Displacement Pumps
9.13 Design Features for Rotary Positive Displacement Pumps
9.14 Design Features for Reciprocating Pumps
9.15 Design Features for Direct Acting Pumps
9.16 Design Features for Direct Acting Pumps
9.17 Design Features for Eductors
9.18 Design Features for Portable/Mobile Pumps
9.19 Design Features for Special Drivers
9.20 Balancing
9.21 Noise, Shock and Vibration
9.22 Materials
9.23 Electric Motors
9.24 Controls and Instrumentation
9.25 Design of Pump Packages
9.26 Painting, Preservation and Packing
9.27 Process Pipework
Annex A - Example Of A Positive Displacement Pump Data Sheet
Annex B - Example Of Contractual Vendor Documentation
Requirements At Contract Start Date
Specifies the general requirements for, and gives guidance on, the procurement of pumps and eductors for machinery installations in HM Surface Ships and Submarines with the following exceptions: a) Pumps for hydraulic systems; b) Pumps which are integral and indispensable assemblies of equipments (e.g. fuel injection pumps on diesel engines) and which are to conform to the requirements of the relevant equipment Defence Standard or similar specification; c) Reactor Main Coolant Pumps; d) All test pumps.
| DevelopmentNote |
Supersedes DEFSTAN 02-327/2(2001) (10/2006) This standard is obsolescent because it is no longer required for procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (05/2016)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DEFSTAN 02-319/3(2009) : 2009 | REQUIREMENTS FOR AVIATION FUEL SYSTEMS IN HM SURFACE SHIPS |
| DEFSTAN 02-319/4(2014) : 2014 | REQUIREMENTS FOR AVIATION FUEL SYSTEMS IN HM SHIPS |
| DEFSTAN 02-320/3(2009) : 2009 | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-332/2(2013) : 2013 | REQUIREMENTS FOR FEED, STEAM AND DRAIN SYSTEMS FOR NUCLEAR SUBMARINE PROPULSION AND GENERATING MACHINERY |
| DEFSTAN 02-323/3(2009) : 2009 | REQUIREMENTS FOR CENTRIFUGES |
| DEFSTAN 02-320/4(2015) : 2015 | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-728/3(2010) : 2010 | REQUIREMENTS FOR DOMESTIC HOT AND COLD FRESH WATER SYSTEMS |
| DEFSTAN 02-303/2(2010) : 2010 | LUBRICATION OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-775/3(2010) : 2010 | REQUIREMENTS FOR GASOLINE SYSTEMS AND STOWAGES IN HM SURFACE SHIPS |
| DEFSTAN 02-322/3(2010) : 2010 | OIL AND BILGE WATER SHIPBOARD PROCESSING ARRANGEMENTS |
| DEFSTAN 02-303/3(2015) : 2015 | LUBRICATING OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS & SUBMARINES |
| BS 6861-1:1987 | Mechanical vibration. Balance quality requirements of rigid rotors Method for determination of permissible residual unbalance |
| DEFSTAN 02-362/1(2000) : 2000 | TYPE AND PRODUCTION TESTING OF MECHANICAL EQUIPMENT |
| DEFSTAN 02-830(PT1)/2(2002) : 2002 AMD 1 2003 | REQUIREMENTS FOR GUNMETAL INGOTS AND CASTINGS - PART 1: GUNMETAL INGOTS AND CLASS 3 GUNMETAL SAND CASTINGS |
| BS 3071:1986 | Specification for nickel-copper alloy castings |
| DEFSTAN 02-849/1(2000) : 2000 | STEEL CASTINGS FOR STRUCTURAL, ENGINEERING AND PRESSURE PURPOSES |
| DEFSTAN 02-635/1(2000) : 2000 | REQUIREMENTS FOR ELECTRIC MOTORS AND CONTROL GEAR ASSOCIATED WITH DOMESTIC WORKSHOPS AND SIMILAR MACHINERY CATEGORY 3 |
| DEFSTAN 02-629/1(2000) : 2000 | REQUIREMENTS FOR TESTING OF ROTATING ELECTRICAL MACHINERY CATEGORY 2 |
| BS ISO 1940-1:2003 | Mechanical vibration. Balance quality requirements for rotors in a constant (rigid) state Specification and verification of balance tolerances |
| DEFSTAN 08-123/1(2000) : 2000 | REQUIREMENTS FOR THE DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS - CATEGORY 2 |
| DEFSTAN 08-160/1(2003) : 2003 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - CATEGORY 2 |
| STANAG 1169 : 0 | FIRE FIGHTING EQUIPMENT AND PRINCIPLES FOR HARMONIZATION OF PRESENT AND FUTURE EQUIPMENT AND MATERIALS |
| BS EN 10025-2:2004 | Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels |
| BS EN 10025-1:2004 | Hot rolled products of structural steels General technical delivery conditions |
| DEFSTAN 02-835/1(2000) : 2000 | REQUIREMENTS FOR HIGH STRENGTH COPPER NICKEL MANGANESE ALLOY FORGINGS, FORGING STOCK RODS AND SECTIONS |
| BS EN 1563:2011 | Founding. Spheroidal graphite cast irons |
| DEFSTAN 08-120/1(2000) : 2000 | REQUIREMENTS FOR DETERMINING THE SHOCK STRENGTH OF EQUIPMENT - CATEGORY 2 |
| DEFSTAN 08-118(PT1)/1(2000) : 2000 | DESIGN GUIDE ON THE REDUCTION OF ACOUSTIC NOISE IN SURFACE SHIPS - CATEGORY 3 - PART 1: REDUCTION OF NOISE RADIATED UNDERWATER |
| DEFSTAN 02-710/1(2000) : 2000 | FLUID SYSTEMS GENERAL REQUIREMENTS (OBSOLESCENT) CATEGORY 2 |
| BS 4235-1:1972 | Specification for metric keys and keyways Parallel and taper keys |
| BS EN ISO 9906:2012 | Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1, 2 and 3 |
| DEFSTAN 02-722/1(2000) : 2000 | REQUIREMENTS FOR THE PREPARATION, IDENTIFICATION AND MANAGEMENTS OF DRAWINGS |
| BS 1486-2:1961 | Lubricating nipples Heavy duty lubricating nipples |
| DEFSTAN 02-747(PT5)/1(2000) : 2000 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 5: DESIGN AND MANUFACTURE OF NICKEL-ALUMINIUM-BRONZE SAND CASTINGS |
| BS EN 809 : 1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| BS EN 12723:2000 | Liquid pumps. General terms for pumps and installations. Definitions, quantities, letter symbols and units |
| DEFSTAN 02-834(PT3)/1(2000) : 2000 | REQUIREMENTS FOR ALUMINIUM SILICON BRONZE - PART 3: INGOTS AND CASTINGS CATEGORY 2 |
| DEFSTAN 02-839/1(2000) : 2000 | REQUIREMENTS FOR WHITE METAL INGOTS |
| DEFSTAN 02-737/1(2000) : 2000 | PRESERVATION AND PAINTING OF MECHANICAL MACHINERY ITEMS |
| BS ISO 11342:1998 | Mechanical vibration. Methods and criteria for the mechanical balancing of flexible rotors |
| BS 4480-5:1979 | Plain bearings: metric series Dimensions, tolerances and methods of checking thin-walled half bearings |
| BS EN 1982:2017 | Copper and copper alloys. Ingots and castings |
| BS 1782:1951 | Specification for couplings for suction and delivery hose (1½ in. to 8 in. nominal sizes) other than fire hose couplings |
| DEFSTAN 01-5/14(2005) : 2005 | FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS |
| BS EN 10293:2015 | Steel castings. Steel castings for general engineering uses |
| DEFSTAN 07-256/1(2000) : 2000 | REQUIREMENTS FOR STRUCTURE BORNE VIBRATION AND AIRBORNE NOISE TESTING OF WARSHIP EQUIPMENT - CATEGORY 2 |
| BS 7130:1989 | Specification for mechanical balancing of rotating machinery: shaft and fitment key convention |
| DEFSTAN 02-627/1(2000) : 2000 | REQUIREMENTS FOR GENERAL APPLICATION TO ROTATING ELECTRICAL MACHINERY CATEGORY 2 |
| DEFSTAN 47-7/2(1972) : 1972 AMD 1 | LUBRICATING NIPPLES, AND ADAPTORS, LUBRICATING NIPPLE |
| DEFSTAN 02-628/1(2000) : 2000 | REQUIREMENTS FOR PREPARATION OF DRAWINGS FOR ROTATING ELECTRICAL MACHINERY CATEGORY 3 |
| BS EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| DEFSTAN 02-833(PT2)/1(2000) : 2000 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
| BS EN 953 : 1998 | SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
| DEFSTAN 02-724/1(2000) : 2000 | PACKAGING |
| DEFSTAN 66-2/4(2003) : 2003 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) |
| BS EN 10204:2004 | Metallic products. Types of inspection documents |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.