DEFSTAN 00-101(PT3)/1(2005) : 2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 3: ELECTRICAL EQUIPMENT AND INSTALLATION
Hardcopy , PDF
27-06-2008
English
01-01-2005
Foreword
Introduction
1 SCOPE
2 WARNING
3 RELATED DOCUMENTS
4 DEFINITIONS AND ABBREVIATIONS
5 AMENDMENT
6 SPONSORSHIP OF THE REQUIREMENT AND SECURITY
7 INTRODUCTION TO THE PROCESS FOR APPROVAL OF A CERTIFICATE
OF SAFETY EXPLOSIVES
7.1 Introduction to the Process
7.2 The JSP520 process (1[st] stage)
7.3 The JSP520/430 Interface
7.4 The JSP430 process (2[nd] stage)
7.5 The Generic Naval Environment
7.6 Magazine and Munition Protection Strategy
7.7 Warships In Harbour
7.8 Regulatory Document
SECTION 1 - PERFORMANCE REQUIREMENTS, ACOP AND GUIDANCE
8 DESIGN REQUIREMENTS FOR ELECTRICAL EQUIPMENT IN MAGAZINES,
WSCs AND DESIGNATED DANGER AREAS
8.1 Description
8.2 Performance Requirements - Basic Principles
8.3 Performance Requirement - Maximum Surface Temperature
8.4 Performance Requirements - Equipment Enclosures
8.5 Performance Requirement - Intrinsically Safe Equipment
8.6 Performance Requirement - Assessment of Equipment
8.7 ACOP - Principles of Electrical Equipment Design for
Magazines and DDAs
8.8 ACOP - Magazine Electrical Equipment Categories
8.9 ACOP - Electrical Equipment Enclosures
8.10 ACOP - The rf Environment
8.11 ACOP - Magnetic Environment and Degaussing Cables
8.12 ACOP - Intrinsically Safe Equipment
8.13 Guidance on General Design Requirements for Electrical
Equipment in Magazines and WSCs
8.14 Guidance on Maximum Surface Temperature
8.15 Guidance on Intrinsically Safe Equipment
8.16 Guidance on BR 862 and other SEMS
9 DESIGN REQUIREMENTS FOR ELECTRICAL INSTALLATIONS
9.1 Description
9.2 Performance Requirements for General Installation
and Siting
9.3 Performance Requirements for Cabling
9.4 Performance Requirements for Circuit Isolation
9.5 Performance Requirements for Emergency Supplies
9.6 Performance Requirements for Fixed Lighting
9.7 Performance Requirements for Power Output Connectors
9.8 Performance Requirements for Installed Test Equipment
9.9 Performance Requirements for Electrically Controlled
Handling Machinery
9.10 Performance Requirements for Earthing
9.11 ACOP for Siting of Equipment
9.12 ACOP for Cabling
9.13 ACOP for Circuit Isolation
9.14 ACOP for Emergency Supplies
9.15 ACOP for Luminaries (Fixed Lighting)
9.16 ACOP for Power Output Connectors
9.17 ACOP for Test Equipment
9.18 ACOP for Electrically Controlled Handling Machinery
9.19 ACOP for Earthing
9.20 Guidance on General Electrical Installation
9.21 Guidance on Siting of Equipment
9.22 Guidance on Cabling
9.23 Guidance on Circuit Isolation
9.24 Guidance on Fixed Lighting
9.25 Guidance on Power Output Connectors
9.26 Guidance on Test Equipment
9.27 Guidance on Electrically Controlled Handling Machinery
10 DESIGN REQUIREMENTS FOR ADJACENT COMPARTMENTS
10.1 Description
10.2 Performance Requirements for Electrical Design in
Adjacent Compartments
10.3 Performance Requirements for Electrical Equipment
in Adjacent Compartments
10.4 Performance Requirements for Electrical Installation
in Adjacent Compartments
10.5 Performance Requirements for Smoke/Heat Detection
Equipment in Adjacent Compartments
10.6 ACOP for Special Requirements in Adjacent Compartments
10.7 ACOP for Special Requirements for Installation in
Adjacent Compartments
10.8 ACOP for Smoke and Heat Detection Equipment
10.9 Guidance on Electrical Equipment in Adjacent Compartments
11 DESIGN REQUIREMENTS FOR TEMPORARILY INSTALLED EQUIPMENT
11.1 Description
11.2 Performance Requirements for Portable Equipment
11.3 Performance Requirements for Emergency Lighting
11.4 ACOP for Temporarily Installed Equipment
11.5 Guidance on Temporarily Installed Equipment
12 ELECTROMAGNETIC INDUCTION, RADIO FREQUENCY AND
ELECTROSTATIC HAZARDS
12.1 Description
12.2 Performance Requirements for Design to Reduce
Electromagnetic Induction, Radio Frequency and
Electrostatic Hazards
12.3 ACOP for Electromagnetic Induction, Radiation and
Electrostatic Hazards
12.4 Guidance on Electromagnetic Induction, Radiation
and Electrostatic Hazards
13 POTENTIALLY HAZARDOUS ENVIRONMENTS OF A SPECIAL NATURE
13.1 Description
13.2 Performance Requirements for Potentially Hazardous
Environments of a Special Nature
13.3 Performance Requirements for Degaussing Cables
13.4 Performance Requirements for Waveguides
13.5 Performance Requirements for Cranes
13.6 Performance Requirements for Ship to Shore Electrical
Connections
13.7 ACOP for Waveguides
13.8 ACOP for Cranes
13.9 ACOP for Ship to Shore Electrical Connections
13.10 ACOP for Earthing of Containers
13.11 Guidance on Degaussing Cables
13.12 Guidance on Waveguides
13.13 Guidance on Ship to Shore Connections
13.14 Guidance on Earthing of Containers
SECTION 2 - REGULATIONS
14 GENERAL APPLICATION OF LEGISLATION
15 MOD DISAPPLICATION
16 MOD REGULATION
ANNEX A - RELATED DOCUMENTS
ANNEX B - ABBREVIATIONS
ANNEX C - DEFINITIONS
Applies to the design, construction and ship fitting of all MOD Ships built to MOD or Classification Society constructional standards and operated by the Royal Navy, Army (including Special Forces), Royal Air Force, RFA or MS.
| DevelopmentNote |
Supersedes DEFSTAN 07-228/1(2000), NES 593 and NES 519. (04/2005)
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DEFSTAN 00-101(PT2)/1(2005) : 2005 | DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 2: SUBMARINES |
| DEFSTAN 00-101(PT2)/2(2008) : 2008 | DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 2: SUBMARINES |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| AOP 39 : 2010 | GUIDANCE ON THE ASSESSMENT AND DEVELOPMENT OF INSENSITIVE MUNITIONS (IM) |
| DEFSTAN 08-108(PT1)/1(2000) : 2000 | NUCLEAR HARDENING GUIDE - CATEGORY 1 - PART 1: HARDENING AGAINST NUCLEAR EMP AND INR |
| DEFSTAN 59-41(PT4)/3(1996) : 1996 | ELECTROMAGNETIC COMPATIBILITY - PART 4: LARGE EQUIPMENT TESTING |
| BS EN 50021:1999 | Electrical apparatus for potentially explosive atmospheres. Type of prot ection \'n\' |
| IEC TR 60079-20:1996 | Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus |
| DEFSTAN 08-123/1(2000) : 2000 | REQUIREMENTS FOR THE DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS - CATEGORY 2 |
| BS EN 50014:1998 | Electrical apparatus for potentially explosive atmospheres. General requirements |
| DEFSTAN 02-602/1(2000) : 2000 | GUIDE TO THE INSTALLATION OF THORN SECURITY AUTOMATIC FIRE DETECTION SYSTEMS CATEGORY N/A |
| BS EN 50016:2002 | Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus \'p\' |
| DEFSTAN 21-27/1(2000) : 2000 | ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS FOR INSTALLATIONS IN SHIPS |
| DEFSTAN 08-109/2(2001) : 2001 | REQUIREMENTS FOR THE DESIGN OF ELECTRICAL SUPPLY AND DISTRIBUTION SYSTEMS IN SURFACE SHIPS AND SUBMARINES - CATEGORY 1 |
| DEFSTAN 08-100/1(2000) : 2000 | GRP SHIPS STRUCTURAL DESIGN - CATEGORY 2 |
| IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
| DEFSTAN 08-4(PT1)/2(1992) : 1992 | NUCLEAR WEAPONS EXPLOSIONS EFFECTS AND HARDENING - PART 1: NUCLEAR WEAPONS EXPLOSIONS: RESULTING ENVIRONMENTS |
| IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| DEFSTAN 08-107/2(2001) : 2001 | GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROMECHANICAL AND NAVAL WEAPON EQUIPMENT - CATEGORY 2 |
| BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| IEC 60079-3:1990 | Electrical apparatus for explosive gas atmospheres - Part 3: Spark-test apparatus for intrinsically-safe circuits |
| BS EN 50017:1998 | Electrical apparatus for potentially explosive atmospheres. Powder filling \'q\' |
| DEFSTAN 08-4(PT3)/2(1992) : 1992 | NUCLEAR WEAPONS EXPLOSIONS EFFECTS AND HARDENING - PART 3: NUCLEAR WEAPONS EXPLOSIONS: SIMULATION OF ENVIRONMENTS |
| BS EN 50019:2000 | Electrical apparatus for potentially explosive atmospheres. Increased safety \'e\' |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| DEFSTAN 59-41(PT7)/1(1995) : 1995 | ELECTROMAGNETIC COMPATIBILITY - PART 7: CODE OF PRACTICE FOR HM SHIPS INSTALLATION GUIDELINES |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| DEFSTAN 08-124/1(2000) : 2000 | RADIO FREQUENCY ENVIRONMENT AND ACCEPTANCE CRITERIA FOR NAVAL STORES CONTAINING ELECTRO-EXPLOSIVE DEVICES - CATEGORY 1 |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| BS 4568-2:1970 | Specification for steel conduit and fittings with metric threads of ISO form for electrical installations Fittings and components |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| DEFSTAN 08-147(PT2)/1(2000) : 2000 | REQUIREMENTS FOR DAMAGE CONTROL AND FIRE PROTECTION FOR THE SAFETY OF SURFACE SHIPS AND SUBMARINES - CATEGORY 1 - PART 2: SUBMARINES |
| DEFSTAN 08-4(PT2)/2(1992) : 1992 | NUCLEAR WEAPONS EXPLOSIONS EFFECTS AND HARDENING - PART 2: NUCLEAR WEAPONS EXPLOSIONS: EFFECTS ON MATERIEL |
| BS EN 50015:1998 | Electrical apparatus for potentially explosive atmospheres. Oil immersion \'o\' |
| DEFSTAN 08-46/2(2002) : 2002 AMD 2 2004 | THE ELECTRIC, MAGNETIC AND ELECTROMAGNETIC ENVIRONMENT |
| STANAG 4439 : 2010 | POLICY FOR INTRODUCTION AND ASSESSMENT OF INSENSITIVE MUNITIONS (IM) |
| BS 4568-1:1970 | Specification for steel conduit and fittings with metric threads of ISO form for electrical installations Steel conduit, bends and couplers |
| DEFSTAN 00-35/2(1996) : 1996 AMD 1 1997 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL |
| DEFSTAN 02-502/1(2000) : 2000 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS CATEGORY 2 |
| DEFSTAN 08-4(PT4)/2(191993) : 1993 | NUCLEAR WEAPONS EXPLOSIONS EFFECTS AND HARDENING - PART 4: NUCLEAR WEAPONS EXPLOSIONS: HARDENING AND TESTING |
| BS EN 50020:2002 | Electrical apparatus for potentially explosive atmospheres. Intrinsic safety \'i\' |
| DEFSTAN 59-41(PT2)/5(2002) : 2002 | ELECTROMAGNETIC COMPATIBILITY - PART 2: MANAGEMENT AND PLANNING PROCEDURES |
| BS EN 50018:2000 | Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure \'d\' |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.