DD CEN/TS 15293:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods
Hardcopy , PDF
31-08-2018
English
28-02-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Sampling
4 Pump marking
5 Requirements and test methods
Annex A (normative) - Required updates to
determination methods
Annex B (informative) - Octane number considerations
Bibliography
Defines requirements and test methods for marketed and delivered Ethanol (E85) automotive fuel. It is applicable to Ethanol (E85) automotive fuel for use in spark ignition engine vehicles designed to run on Ethanol (E85).
| Committee |
PTI/2
|
| DevelopmentNote |
Supersedes 09/30199323 DC. (02/2011)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| RevisionOf | |
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This Technical Specification specifies requirements and test methods for marketed and delivered Ethanol (E85) automotive fuel. It is applicable to Ethanol (E85) automotive fuel for use in spark ignition engine vehicles designed to run on Ethanol (E85). Ethanol (E85) automotive fuel is a mixture of nominally 85 % (V/V) ethanol complying to EN 15376 and petrol complying to EN 228, but also including the possibility of having different \'seasonal grades\' containing more than 50 % (V/V) ethanol. NOTE For the purposes of this document, the terms \'% (m/m)\' and \'% (V/V)\' are used to represent respectively the mass fraction and the volume fraction.
| Standards | Relationship |
| CEN/TS 15293:2011 | Identical |
| EN 16942:2016 | Fuels - Identification of vehicle compatibility - Graphical expression for consumer information |
| BS EN 16942:2016 | Fuels. Identification of vehicle compatibility. Graphical expression for consumer information |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| EN 15721:2013 | Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method |
| EN 15489:2007 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method |
| ISO 5164:2014 | Petroleum products — Determination of knock characteristics of motor fuels — Research method |
| EN ISO 5164:2014 | Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014) |
| EN 15769:2009 | Ethanol as a blending component of petrol - Determination of appearance - Visual method |
| EN 15692:2009 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method |
| CEN/TR 15367-3:2009 | Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination |
| EN 1601:2017 | Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) |
| EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| EN 15485:2007 | Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method |
| EN ISO 6246:2017 | Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017) |
| EN 15491:2007 | Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method |
| ISO 7536:1994 | Petroleum products — Determination of oxidation stability of gasoline — Induction period method |
| EN ISO 12185:1996 | Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
| CEN/TR 15367-2:2007 | Petroleum products - Guide for good housekeeping - Part 2: Automotive petrol fuels |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| EN 15487:2007 | Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method |
| EN 15376:2014 | Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods |
| EN 15837:2009 | Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) |
| ISO 5163:2014 | Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| PREN 15492 : DRAFT 2010 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
| ISO 6246:2017 | Petroleum products — Gum content of fuels — Jet evaporation method |
| EN 15490:2007 | Ethanol as a blending component for petrol - Determination of pHe |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| EN ISO 7536:1996 | Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994) |
| EN 15938:2010 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| EN 15488:2007 | Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method |
| EN ISO 2160:1998 | Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998) |
| EN ISO 5163:2014 | Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014) |
| EN 15486:2007 | Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
| EN ISO 4259:2006 | Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.